D-Link Air Xpert DI-774 Manual de usuario

DI-774

Tri-Mode Dualband

Wireless Router

5V 3A DC Power Adapter

specifications subject to change without notice. DI-774. 10242003

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other

computers, you must have either an Ethernet-based Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-774 Tri-Mode Dualband Wireless Router. The DI-774 acts as a DHCP server

and will assign all the necessary IP address information on your network. See

Appendix at the end of this Quick Installation Guide or the Manual on the CD-

ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-774 Tri-Mode Dualband Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (Straight-Through) Cable

If any of the above items are missing, please contact your reseller.

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 6.2.3.

Using a power supply

with a different voltage

rating will damage this

product and void the warranty

Connecting The DI-774 Wireless Router To

Your Network

C. LAN PORTS These

are the connections

for Ethernet cables to

Ethernet enabled

computers.

Reset Button

Pressing this button restores the Router to

its original factory default settings.

B. WAN PORT

This is for the connection

of an Ethernet cable to the

Cable or DSL modem

D. Antenna

Used to

wirelessly

connect to

802.11a/b/g

adapters.

A. Receptor for

Power Adapter.

A. First, connect the power adapter to the receptor at the back panel of the

DI-774 and then plug the other end of the power adapter to a wall outlet or power

strip. The Power LED lights up indicating proper operation.

B. 1. Power off your Cable or DSL modem; the devices that do not have a on/off

switch and will require you to unplug the power adapter. Now, the DI-774 should be

powered on and the Cable / DSL modem should be turned off. Cable / DSL

modem (Power Off) – DI-774 (Power On)

2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable / DSL

modem by turning on the unit or plugging in the power adapter. Cable / DSL

modem (Power On) – DI-774 (Power On)

3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel

of the DI-774. The WAN LED light will illuminate to indicate proper connection. If

the WAN LED is not illuminated, please go back to step B1 and repeat the steps.

C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-774 and an

available Ethernet port on the network adapter in the computer you are using to

configure the DI-774. The LED light for LAN Port 1 illuminates to indicate proper

connection. (Note: The LAN Ports on the DI-774 are Auto-MDI/MDIX. Meaning

you can use a straight-through or crossover-Ethernet cable in the LAN Ports.)

D. Computers equipped with D-Link 802.11a/b/g wireless adapters will be able to

connect out of the box with the DI-774 using their default wireless settings.

Restart Your Computer

Connecting Additional Computers To

The DI-774

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped

computers to the remaining Ethernet LAN ports on the back panel of the DI-774.

WAN LED – a

solid light indicates

connection on the

WAN port. This

LED blinks during

data transmission.

LOCAL NETWORK

LEDs – a solid light

on the port indicates a

connection to an

Ethernet enabled

computer on ports 1-4.

This LED blinks during

data transmission.

11a and 11g LEDs – a

solid light indicates that

the wireless segment is

ready. This LED blinks

during wireless data

transmission.

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

Status – a blinking light

indicates that the DI-774

is functioning properly.

Power LED – a solid light

indicates a proper connection

to the power supply.

Once you have logged in, the

Home screen will appear.

Using The Setup Wizard

The logon pop-up screen will appear.

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

Type “admin” for the username and

leave the password field blank.

Click OK

Click Run Wizard

You will see the following screens

Set up your new password.

You have the option to

establish a password.

Click Next

The Setup Wizard (continued)

Choose your time zone from the

drop down list.

Click Next

If your ISP requires a Static IP

Address, and this option is selected,

then this screen will appear:

Enter the IP address

information

originally provided to you by your

ISP. You will need to complete all

the required fields.

Click Next

If you selected Dynamic IP Address,

this screen will appear: (Used mainly

for Cable Internet service.)

Click the “Clone MAC Address”

button to automatically copy the

MAC address of the network adapter

in your computer. You can also

manually type in the MAC address.

Click Next

The Setup Wizard (continued)

Select your Internet Connection.

You will be prompted to select the

type of Internet connection for your

router.

Click Next

If you are unsure of which

setting to select, please contact

your Internet Service Provider.

This setup should be done on the computer

that is registered on the ISP’s network.

Please continue to the last part of step 4, 802.11g Wireless Setup.

The Setup Wizard (continued)

If your ISP uses PPPoE (Point-to-

Point Protocol over Ethernet), and

this option is selected, then this

screen will appear: (Used mainly for

DSL Internet service.)

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and password

provided to you by your ISP.

Click Next

The default wireless settings

for your 802.11g wireless

network are:

SSID = default

Channel = 6

You can change these settings

to match an existing wireless

network.

Click Next

802.11g Wireless Setup

If you wish to use encryption for

your 802.11g network, the DI-774 is

capable of three levels of wireless

encryption: 64-bit, 128-bit, and 152-

bit. By default the encryption is

disabled. You can change the

encryption settings for more secure

wireless communication.

Click Next

The Setup Wizard (continued)

Click Next

The default wireless settings for

your 802.11a wireless network

are:

SSID = default

Channel = 52

You can change these settings to

match an existing wireless

network.

802.11a Wireless Setup

Click Next

If you wish to use encryption for

your 802.11a network, the DI-774 is

capable of three levels of wireless

encryption: 64-bit, 128-bit, and 152-

bit. By default the encryption is

disabled. You can change the

encryption settings for more secure

wireless communication.

Test Internet Connection.

You will be returned to the Home tab.

For additional settings or informa-

tion, refer to the Advanced, Tools,

or Status tabs on the web-manage-

ment interface; or to the Manual

located on the CD.

Then relaunch your Web browser

(i.e., Internet Explorer or Netscape

Navigator), to link to your favorite

Web site to test your Internet

connection.

Click to Exit

Your Setup is Complete!

Click Restart

Click Close

To connect to the network, make sure

the network adapter in your computer

is configured properly. Here’s how to

configure the network adapter to obtain

an IP address automatically for the

DI-774 Broadband Router.

APPENDIX

Click Internet Protocol (TCP/IP)

Click Properties

Select Obtain an IP address

automatically

Restart your computer

if necessary

Click OK

For Microsoft Windows XP: Go to Start >

right-click on My Network Places >

select Properties > right-click on the

Network Connection associated with the

Ethernet adapter and select Properties

(i.e., D-Link DFE-530TX+).

Otros manuales para Air Xpert DI-774

Tabla de contenidos

Otros manuales de Enrutador de red de D-Link

D-Link

D-Link DSL-2740B Manual de usuario

D-Link

D-Link DSL-2540U Manual de usuario

D-Link

D-Link DWC-1000 Manual de usuario

D-Link

D-Link DWR-953 Manual de usuario

D-Link

D-Link SharePort DIR-825 Manual de usuario

D-Link

D-Link DSL-2640U Manual de usuario

D-Link

D-Link DIR-619 Manual

D-Link

D-Link EAGLE PRO AI AX1500 M15 Manual de usuario

D-Link

D-Link DI-604UP Manual de usuario

D-Link

D-Link DI-804V Manual de usuario

D-Link

D-Link DKT-710 Manual de usuario

D-Link

D-Link xStack DES-3528P Series Manual

D-Link

D-Link DSL-500 Manual de usuario

D-Link

D-Link DWR Series Manual de usuario

D-Link

D-Link DIR-625 Router Manual de usuario

D-Link

D-Link DIR-615 - Wireless N Router Manual de usuario

D-Link

D-Link DES-3010F Manual de usuario

D-Link

D-Link DIS-200G-12S Manual de usuario

D-Link

D-Link DWR-161 Manual de usuario

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manual de usuario

D-Link

D-Link AirPlus DWL-810+ Manual de usuario

D-Link

D-Link DIR- 878 Manual de usuario

D-Link

D-Link DES-6300 Manual de usuario

D-Link

D-Link EAGLE PRO AI M15 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad