D-Link Air DCS-1000W Manual de usuario

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

Before You Begin

You must have at least the following:

•Web Browser

•Wired Hub/Switch/Router OR Wireless 802.11b Router

• CD-ROM Drive

DCS-1000WDCS-1000W

DCS-1000W

D-Link 2.4Ghz WirelessD-Link 2.4Ghz Wireless

D-Link 2.4Ghz Wireless

Internet CameraInternet Camera

Internet Camera

This product can be set up usingThis product can be set up using

This product can be set up using

any current Web browser, i.e.,any current Web browser, i.e.,

any current Web browser, i.e.,

Internet Explorer 6.0 orInternet Explorer 6.0 or

Internet Explorer 6.0 or

Netscape Navigator 7.0Netscape Navigator 7.0

Netscape Navigator 7.0

• One Internet Camera with 2 External Wireless

Antennas

• One Installation CD-ROM (containing

Drivers, Installation Guide, Software, and

Manual)

• Mounting Kit

• One AC Power Adapter

• One Category 5 Ethernet Cable

Hardware Installation

System Requirements

• Web Browser (Java Enabled recommended)

• CPU: Pentium II, 266 MHz or above

• Memory Size: 32 MB (64 MB recommended)

• VGA card resolution: 800x600 or above

Connect the Ethernet Cable

Connect an Ethernet cable to the network cable connector

located on the DCS-1000W’s rear panel and attach it to

the network.

Note: We suggest using the Ethernet port to configure the

DCS-1000W, then installing the camera in its preferred

location. Doing so will allow easy installation and proper

configuration.

Attach the External Power Supply

Attach the external power supply to the DC power input

connector located on the rear panel of your camera and

connect it to your local power supply. Note: Power source

is confirmed when the blue LED Power Indicator on the

Internet Camera is illuminated. Network connection is

indicated by an orange LED.

Install Antennas

Locate the antenna connectors on the rear panel of your

DCS-1000W. Attach the 2 external antennas that came with

the DCS-1000W into the antenna connectors.

Configure Network Communication

Locate the slide switch located on the rear panel of your

DCS-1000W. Position the slide switch to either the LAN,

LAN+WLAN, or WLAN position depending on the type of

network configuration that you are planning to use with

your camera. Position the switch on LAN+WLAN if you

wish to connect to both your wired and wireless network.

Running the Setup Wizard

You are now ready to run the Setup Wizard, which will guide you quickly through the

installation process.

Insert the D-Link DCS-1000W Driver CD

into your CD-ROM drive.

Click Next

Click Yes

Click Install

Wizard

Click Next

Click Finish

Click Wizard

to begin

Your camera’s IP address will be displayed

here if it is valid.

To run the Setup Wizard, click on

Start->Programs->DCS-1000 Series Setup

Wizard.

Running the Setup Wizard (continued)

You must change the Admin ID and Pass-

word immediately to protect your camera

against unauthorized access. By default,

the Admin ID and Password are blank. To

change the Admin ID and Password, select

both Change boxes and enter in a new

Admin ID and Password.

This screen appears if the default IP

Address of the camera (192.168.0.20) does

not correspond with your local area network

settings. You must assign an IP address

for your camera that corresponds to your

network’s IP addressing scheme.

By default, the Admin ID and Password are

blank. If you are running this Setup Wizard

for the first time, simply click OK to con-

tinue.

The IP Address of your camera must

corresond with your network settings for you

to access the camera. If you are unsure of

what these settings should be, please

check with your network administrator.

Click OK

Click Yes

Click Next

Running the Setup Wizard (continued)

169.254.60.196

Input the correct settings for your

camera into the IP Address and

Subnet Mask fields. Remember that

these settings must correspond with

your network settings.

If you need to make any changes,

click Back to modify your camera

settings. Otherwise, click Restart to

save your settings.

Click Next

Your setup is now complete! When

the main Setup Wizard screen appears

after clicking Restart, you are ready to

view your camera’s images. Click

Link to automatically launch your web

browser and view your images.

Click Link

Click Restart

The Connection Mode depends on how

your camera is connected to your

network. Click Infrastructure for use with

a router or Adhoc for peer-to-peer. The

Network Name, Wireless Channel, and

Encryption Keys MUST correspond with

your wireless network settings.

Click Next

Running the Setup Wizard (continued)

Viewing the Streaming Video

•The Welcome screen of the Internet Camera will appear. You may either

choose to view your video images in Java mode or Active X mode. If you

have a Java enabled web browser, you will be able to view the video

image automatically. If you do not have Java on your computer, please

refer to the Tips section below to install Java on your computer. If you

would like to view the image using Active X mode, please refer to the

manual on how to install Active X.

•Next, you will want to adjust the focus on the lens. To do this, turn the

lens slowly clockwise or counter-clockwise until a desired image appears

on your web browser. AVOID overturning the lens as this will either displace

the lens from your camera or damage the lens.

•If you are installing several cameras, it is recommended to use one

computer to configure all of them before you install them

into your planned locations. To avoid IP address conflict, use

192.168.0.20 for the LAST camera that you plan on installing.

•Make sure that you have the latest version of Java installed on your

computer to ensure proper operation when viewing the video in Java

mode. Java can be downloaded for free from Sun’s web site. (http://

www.sun.com.download/)

•When using the camera in 802.11b mode, make sure that the camera

is located within operating distance from the access point. The

number of walls and other objects will hinder the wireless effective

operating distance.

•Please refer to the Manual located on the CD-ROM for additional

information regarding all features and instructions related to the

Internet Camera. The Manual also provides a troubleshooting section.

Tips

You may access your camera’s images at any time simply by using your favorite Web

browser. Type “http://address” in the address box where address is the IP address

that you assigned to the camera from the previous section. Press Enter. Note: This

screen can also be accessed from the Setup Wizard using the Link button.

TechnicalSupport

You can find the most recent software and user

documentation on the D-Link website.

D-Link provides free technical support for customers

within the United States for the duration of the warranty

period on this product.

U.S. customers can contact D-Link technical support

through our web site or by phone.

D-Link Technical Support over the Telephone:

(877) 45D-LINK

(877) 453-5465

24 hours a day, seven days a week

D-Link Technical Support over the Internet:

http://support.dlink.com

email: [email protected]

respective holders. Software and specifications subject to change without notice. DCS-1000W.02122003

Otros manuales para Air DCS-1000W

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara IP de D-Link

D-Link

D-Link DCS-930L Guía de seguridad

D-Link

D-Link DCS-932L Guía de seguridad

D-Link

D-Link SECURICAM Network DCS-6620 Manual de usuario

D-Link

D-Link DCS-2330L Manual de usuario

D-Link

D-Link DCS-2630L Manual de usuario

D-Link

D-Link DCS-936L Manual de usuario

D-Link

D-Link SECURICAM DCS-910 Manual de usuario

D-Link

D-Link DCS-942L Manual del operador

D-Link

D-Link SECURICAM Network DCS-6620 Manual de usuario

D-Link

D-Link DCS-930-A2 Manual de usuario

D-Link

D-Link DCS?6010L Manual de usuario

D-Link

D-Link DCS-2121 - SECURICAM Network Camera Manual de usuario

D-Link

D-Link DCS-1000 Manual de usuario

D-Link

D-Link DCS-942L Manual de usuario

D-Link

D-Link DCS-2530L Manual de usuario

D-Link

D-Link SECURICAM Network DCS-2120 Manual de usuario

D-Link

D-Link DCS-942L Manual de usuario

D-Link

D-Link DCS-5030L Manual de usuario

D-Link

D-Link SECURICAM Network DCS-5300G Manual de usuario

D-Link

D-Link DCS-5220 Manual de usuario

D-Link

D-Link DCS-5000L Manual de usuario

D-Link

D-Link WIRELESS G DCS-950G Manual de usuario

D-Link

D-Link Securicam Network DCS-2000 Manual de usuario

D-Link

D-Link DCS-4701E Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario