CYP PUV-1660TTX Manual de usuario

PUV-1660TTX

HDBaseT™ Table-Top Transmitter

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use

to avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

RDV1 2019/12/03 Preliminary release

CONTENTS

1. Introduction..................................................1

2. Applications ..................................................1

3. Package Contents .........................................1

4. System Requirements ..................................2

5. Features.........................................................2

6. Operation Controls and Functions..............3

6.1 Front Panel.............................................................3

6.2 Rear Panel...............................................................4

6.3 RS-232 Defaults....................................................5

6.4 WebGUI Control ...................................................6

6.4.1 A/V Switch Tab...........................................8

6.4.2 Automation Tab...................................... 10

6.4.3 EDID Tab.................................................... 12

6.4.4 Network Tab............................................. 14

6.4.5 System Tab ............................................... 15

6.5 Telnet Control..................................................... 16

6.6 Serial and Telnet Commands........................ 16

7. Connection Diagram ..................................38

8. Specications..............................................39

8.1 Technical Specifications ................................. 39

8.2 Video Specifications......................................... 40

8.3 Audio Specifications........................................ 42

8.3.1 Digital Audio ........................................... 42

8.3.2 Analogue Audio..................................... 42

8.4 Cable Specifications ........................................ 43

8.5 HDBaseT Features............................................. 44

9. Acronyms.....................................................45

1. INTRODUCTION

This UHD+Multi Format to HDBaseT Table Box is an HDMI, Mini-DP, and

USB-C switch with audio embedding and HDBaseT output. The table box

is designed to be placed on a table, or mounted to any typical table edge

using a clamp. This unit can send high definition uncompressed audio/

video along with Ethernet over a single cable up to a distance of 100

meters at 1080p@60Hz. The HDMI, Mini-DP, and USB-C inputs all support

resolutions up to 4K@60Hz (4:4:4, 8-bit). With the use of the 3.5mm audio

input, stereo audio may be embedded into the HDBaseT output as well.

Despite HDBaseT’s 10.2Gbps bandwidth limitation, high bandwidth 4K

UHD+HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit), can

be supported and will be automatically converted to 8-bit colour, or the

4:2:0 colour space when necessary.

Signal management features, such as automatic source switching based

on input signal detection, enable convenient hands-free operation.

Additional functionality such as advanced EDID management,

HDCP management, and basic signal event automation (which can

automatically send customised RS-232 or CEC commands to an external

device) are also available.

The unit is powered via PoH (Power over HDBaseT) from a compatible

HDBaseT receiver, which allows for greater flexibility in installations. The

unit can be controlled via the front panel button, WebGUI, and Telnet.

When paired with a compatible receiver RS-232 control also becomes

available making it exceptionally versatile.

2. APPLICATIONS

Household entertainment sharing and control

Lecture halls, auditoriums, and classrooms

Conference rooms and boardrooms

Hotel event spaces

3. PACKAGE CONTENTS

1× UHD+3×1 Multi-Format to HDBaseT Table Box with PoH (PD)

1× Operation Manual

4. SYSTEM REQUIREMENTS

HDMI, DisplayPort, or USB Type-C source equipment such as media

players, video game consoles, or set-top boxes.

A compatible HDBaseT receiver with PoH (PSE) support is required.

The use of Premium High Speed HDMI cables, and industry standard

Cat.6, Cat.6A, or Cat.7 Ethernet cable is highly recommended.

The use of 30AWG (Gen 2) USB Type-C cable is highly recommended.

The use of DisplayPort 1.2 or higher spec cable is highly recommended.

5. FEATURES

HDMI 2.0, DisplayPort 1.4, USB-C, and DVI 1.0 compliant

HDCP 1.x and 2.2 compliant

1 HDMI, 1 Mini-DisplayPort, 1 USB Type-C video input, and a 3.5mm

mini-jack analogue audio input

1 HDBaseT output

Supports up to 4K UHD+(18Gbps, 4K@60Hz 4:4:4, 8-bit) video input

Supports Deep Colour input up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) input

HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with

automatic colour space conversion of 4K@50/60Hz (4:4:4, 8-bit) or

4K@any (10/12-bit) sources

Supports pass-through of many audio formats including 8 channel

LPCM, Bitstream, and HD Bitstream

Analogue audio may be embedded with all sources

Per-input EDID management with internal or external EDID options

Supports manual input selection or automatic input selection with hot

plug detection

Basic signal event automation (via RS-232 or CEC w/ compatible

receiver)

Unit is powered via PoH from a compatible HDBaseT receiver

Convenient table box design

Front panel LEDs indicate input selection, power, link, and HDCP status

Controllable via front panel button, WebGUI, Telnet, or RS-232 (w/

compatible receiver only)

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

AUDIO IN

Mini DP IN

LAN

HDMI IN

HDCP

LINK

PWR

USB-C IN

INPUT

SELECT

FAC.

RESET

PUV-1660TTX

6 9 1087

21 43 5

1AUDIO IN Port: Connect to the stereo analogue output of a device

such as a CD player or PC for embedding into the HDBaseT output.

2Mini-DP IN Port & LED: Connect to DisplayPort source equipment

such as a PC or laptop. The LED will illuminate when the DisplayPort

input has been selected.

Note: For 4K sources, use of cable that supports DisplayPort 1.2 or higher

is strongly recommended.

3USB-C IN Port & LED: Connect to USB Type-C video source equipment

such as a PC or laptop. The LED will illuminate when the USB-C input

has been selected.

Note: Not all devices with USB Type-C ports can support video output.

Please verify that the device supports video output from the USB Type-C

port before connecting it.

4LAN Port: Connect directly, or through a network switch, to your

PC/laptop to control the unit via Telnet/WebGUI and to extend the

network across the HDBaseT connection.

5INPUT SELECT Button: Press this button to sequentially switch

through the available inputs.

6Reset Pinhole: Press to reset the unit to its factory defaults.

7HDMI IN Port & LED: Connect to HDMI source equipment such as a

media player, game console, or set-top box. The LED will illuminate

when the HDMI input has been selected.

8PWR LED: This LED will illuminate to indicate the unit is on and

receiving power.

9LINK LED: This LED will illuminate when the unit is on, receiving

power, and has successfully linked to a compatible receiver.

10 HDCP LED: This LED will illuminate when HDCP is active on the

currently selected input. If no HDCP is present, or authentication has

failed, the LED will remain o.

6.2 Rear Panel

CAT5e/6/7 OUT

1CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT receiver with

a single Cat.5e/6/7 cable for transmission of all data signals. Power via

PoH will also be supplied to this unit when connected to a compatible

PSE receiver.

6.3 RS-232 Defaults

Serial Port Default Settings

Baud Rate 19200

Data Bits 8

Parity Bits None

Stop Bits 1

Flow Control None

Note: Access to control the table box transmitter’s settings is provided via the

RS-232 port located on the connected receiver.

Tabla de contenidos

Otros manuales de Transmisor de CYP

CYP

CYP CH-1529TXV Manual de usuario

CYP

CYP PU-501 Manual de usuario

CYP

CYP PU-514LTX-1H Manual de usuario

CYP

CYP PU-1H7HBTL Manual de usuario

CYP

CYP CH-2605TXV Manual de usuario

CYP

CYP CSI-8H8CV2IR Manual de usuario

CYP

CYP CH-1103TX Manual de usuario

CYP

CYP Dante AU-DTI4-TX Manual de usuario

CYP

CYP CA-HDMIAT Manual de usuario

CYP

CYP CH-352TX Manual de usuario

CYP

CYP PUV-1630TXWP Manual de usuario

CYP

CYP CDPS-P313RTX Manual de usuario

CYP

CYP CH-U331TX Manual de usuario

CYP

CYP PUV-1620S-TX Manual de usuario

CYP

CYP PU-507TX-1H Manual de usuario

CYP

CYP AVX-101F-TX Manual de usuario

CYP

CYP CSI-8H8CVTX Manual de usuario

CYP

CYP PUV-1630TTX Manual de usuario

CYP

CYP CH-306TXA & RXA Manual de usuario

CYP

CYP CH-2606TX Manual de usuario

CYP

CYP PU-1103 Manual de usuario

CYP

CYP PU-607BD-TX Manual de usuario

CYP

CYP PUV-1210PL-TX Manual de usuario

CYP

CYP IP-A750TX Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario