CYP PU-507-KIT Manual de usuario
PU-507-KIT
v1.4 HDMI over Single CAT5e/6
HDBaseT 5Play, Single LAN, Set
(up to 100m)
OPERATION MANUAL
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
RDV1 20110728 Preliminary Release
Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. Package Contents ...................................................................... 1
4. System Requirements..................................................................1
5. Features........................................................................................1
6. Specifications ..............................................................................2
7. Operation Controls and Functions............................................. 3
7.1 Front Panel.................................................................... 3
7.2 Rear Panel .................................................................... 4
8. D-Sub 9 Pin Definitions.................................................................4
9. Connection and Installation ......................................................5
10. Acronyms.....................................................................................6
1
1. Introduction
2. Applications
•Household entertainment sharing and control
•Lecture room display and control
•Showroom display and control
•Meeting room presentation and control
•Classroom display and control
3. Package Contents
•HDMI to CAT5e/6 with LAN/IR/RS-232 x 1
•CAT5e/6 to HDMI with LAN/IR/RS-232 x 1
•IR Blaster x 1
•IR Receiver x 1
•24V/1.25A DC Power Adaptor x 1
•Operation Manual
4. System Requirements
Input HDMI source equipment such as DVD/Blu-Ray player and output
display with HDMI input jack.
5. Features
•HDMI 1.4 with 3D, 4k x 2k support, HDCP & DVI Compliant
•Supports HDCP repeater and CEC function
•Simultaneously uncompressed data sending over a single 100M/328ft
withCAT6 cable or 80M/262ft with CAT5e cable
•Uncompressed video 1080p, 60Hz, 48bits
•Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
•5Play™ convergence: HDMI, LAN, POE & Control (IR & RS232)
•Installation Friendly
The PU-507-KIT allows uncompressed HDMI signals and IP data to be
transmitted over a Single CAT5e/6 cable. This solution has the added
features of RS-232 and 2-way IR control functionality over the same CAT5e/6
cable.
These combined HDMI and control signals can be transmitted up to lengths of
100 metres.
2
6. Specications
Transmitter
Input 1 x HDMI, 1 x IR Extender, 1 x RS-232
1 x IR Blaster, 1 x LAN
Output 1 x CAT5e/6
Receiver
Input 1 x CAT5e/6, 1 x IR Extender, 1 x IR Blaster,1x LAN
Output 1 x HDMI, 1 x RS-232
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
IR Frequency 20~60Hz
Dimensions (mm) 102(W) x 115(D) x 25(H)
Weight (g) 252/Tx, 256/Rx
Chassis Material Aluminum
Silkscreen Color Silver
Power Consumption TX: 6W ; RX: 8W
Operating Temperature 0°C ~ 40°C/ 32° ~104°
Storage Temperature -20°C ~ 60°C/ -4° ~140°
Relative Humidity 20~90% RH (non-condensing)
3
7. Operation Controls and Functions
7.1 Front Panel
Transmitter Receiver
①.HDMI In/Out: These slots are to connect with HDMI source equipment
such as DVD/Blu-ray player and HDMI TV/monitor with HDMI cables.
②.LAN: These slots are to connect with RJ-45 cable from the internet or
intranet system to PC/NB device for online signal sending over CAT5e/6
③. RS-232 In/Out: These slots are to connect with D-Sub 9pin cable from PC/
NB for RS-232 control and signal sending to the control device.
7.2 Rear Panel
Transmitter Receiver
①.Power LED: This green LED will illuminate when the device is attached with
power supply.
②.
DC 24V: This slot is where you plug the 24V DC power into the unit and
connect the adaptor to an AC outlet.
③.IR 1/2 Blaster: These slots are to connect with the IR blaster cable included
in the package for IR signal transmitting.
④. IR 1/2 Extender: These slots are to connect with the IR receiver cable
included in the package for IR signal receiving.
⑤.Link LED: This green LED will illuminate when the signal is detected from the
other end of the device.
⑥. CAT5e/6 Out/In: These slots are to be connected with a single CAT5e/6
cable for data transmitting.
① ② ③③②①
① ③
⑤
③④
②① ④⑤
⑥⑥
4
8. D-Sub 9 Pin Denitions
Pin Dene TX / RX
1 N/C
2 TxD / RxD
3 RxD / TxD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C
5
9. Connection and Installation
HD Monitor
or
DVD Blu-ray
TV/Monitor
PU-507RXPU-507TX
Hub/Server
NB
PC
TV
MAC
CAT5e(80M)/
CAT6(100M)
HDMI
Cable
HDMI
HDMI
Ethernet Cable
HDMI
Cable
HDMI
HDMI
HDMI
HDMI
HDMI
Cable
HDMI
HDMI
HDMI
HDMI
DC
IR Extender
30°
30°
3M 3M
7M
DVD
Remote
IR Blaster
IR Blaster
IR Extender
30°
30°
3M 3M
7M
DVD
Remote
6
Acronyms A
Acronym Complete Term
CAT5e Category 5 Cable
CAT6 Category 6 Cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital content protection
HDMI High-Denition Multimedia Interface
IR Infrared
A
Otros manuales para PU-507-KIT
1
Tabla de contenidos
Otros manuales de Transmisor de CYP
CYP
CYP CH-2527TX Manual de usuario
CYP
CYP CH-507TXWPUS Manual de usuario
CYP
CYP CH-352TX Manual de usuario
CYP
CYP Dante AU-DTI4-TX Manual de usuario
CYP
CYP CA-HDMIAT Manual de usuario
CYP
CYP CH-527TXVBD Manual de usuario
CYP
CYP CH-1529TXPLV Manual de usuario
CYP
CYP CHDBT-1H2CE Manual de usuario
CYP
CYP COH-RX2 Manual de instalación
CYP
CYP PU-607BD-TX Manual de usuario
CYP
CYP CH-1529TXV Manual de usuario
CYP
CYP VEX-X1102T-B0C Manual de usuario
CYP
CYP CH-516TXAS Manual de usuario
CYP
CYP CH-1107 TX Manual de usuario
CYP
CYP CH-306TXA & RXA Manual de usuario
CYP
CYP PUV-2100TX-AVLC Manual de usuario
CYP
CYP VEX-T1201T Manual de usuario
CYP
CYP PU-8H8CTXIR Manual de usuario
CYP
CYP PU-USB2-KIT Manual de usuario
CYP
CYP CH-A320TX Manual de usuario
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
