CYP SY-PT385A Manual de usuario
SY-PT385A
PC/VGA to CV & SV (NTSC & PAL)
OPERATION MANUAL
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
electrical shock and injury to persons.
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 18/01/12 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................2
6.3 Side Panel .........................................3
6.4 Top Panel ..........................................3
7. Connection and Installation................. 4
........................................ 5
9. Acronyms ............................................... 6
1
1. INTRODUCTION
of analog computer images, from VGA to WUXGA, to interlaced NTSC
or PAL video. With frame rate conversion and Overscan / Underscan
features that allows users to view PC source on the Composite and
S-Video monitor without image cutting off.
2. APPLICATIONS
Video conference
Business presentation
Lecturing room
3. PACKAGE CONTENTS
5V DC power supply adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as PC and output to Composite and
S-Video monitor, Projector or TV.
5. FEATURES
Automatically detects and down converts the incoming PC images
to NTSC or PAL
Support high resolution PC input timing from VGA to WUXGA
Scale down PC video to Composite/S-Video
Switch between NTSC/PAL
Image Overscan/Underscan selection
Supports ADC conversion
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PC
INPUT
DC
5 V
1 2
1PC INPUT
Connect the VGA input port to the VGA output port of your source
equipment such as computer with D-Sub 15pin cable.
2DC 5V
Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet.
6.2 Rear Panel
OUTPUT
S-VIDEO VIDEO UNDER SCAN
OVER SCAN
1 2 3
1S-VIDEO OUT
Connect the S-Video output port to the S-Video input port of
analog monitor, Projector or TV.
2VIDEO OUT
Connect the Composite Video output port to the Composite
Video input port of analog monitor, Projector or TV.
3UNDERSCAN /OVERSCAN
Switch in between the Underscan/Overscan of the output image
especially when connecting to different monitor/TV.
3
6.3 Side Panel
NTSC PAL
1
1NTSC/PAL Switch
Switch the output display image between NTSC or PAL system. The
and position and while adjusting the power LED will blink.
Note: Source input signal must have a full screen image in order to
allow the auto adjustment function to perform successfully.
6.4 Top Panel
POWER
1
1POWER & LED
Press this button to switch ON the device and the LED will illuminate
in green or set it to standby mode and the LED will turn red.
4
7. CONNECTION AND INSTALLATION
OR
HD TV
PC NB
5
8. SPECIFICATIONS
Input port
Output ports
Input Resolution
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL
Dimensions
Weight
Chassis Material Plastic
Silkscreen Color Gray
Operating Temperature
Storage Temperature
Relative Humidity
Power Consumption
6
9. ACRONYMS
ACRONYM COMPLETE TERM
ADC Analog-to-Digital Converter
NTSC National Television System Committee
PAL Phase Alternating Line
VGA Video Graphics Array
WUXGA Widescreen Ultra eXtended Graphics Array
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CSC-1600HD Manual de usuario
CYP
CYP CS-801H Manual de usuario
CYP
CYP CSC-220 Manual de instalación
CYP
CYP CH-2D3D Manual de usuario
CYP
CYP CP-259HN Manual de usuario
CYP
CYP SY-P295N Manual de usuario
CYP
CYP QU-8MS Manual de usuario
CYP
CYP CLUX-SDI2DVIA Manual de usuario
CYP
CYP EL-6010-4K22 Manual de usuario
CYP
CYP CP-252 Manual de usuario
CYP
CYP CP-290 Manual de usuario
CYP
CYP CPT-385AM Manual de usuario
CYP
CYP CSC-6011 Manual de usuario
CYP
CYP EL-7400V Manual de usuario
CYP
CYP CDPS-41SQ Manual de usuario
CYP
CYP CLUX-2HPIP Manual de usuario
CYP
CYP CSC-107 Manual de usuario
CYP
CYP CSC-5500 Manual de usuario
CYP
CYP AU-D2 Manual de usuario
CYP
CYP SY-298H Manual de usuario
