CYP CP-259HN Manual de usuario
CP-259HN
HDMI to HDMI Scaler
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 16/07/14 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 OSD Menu.........................................5
7. Connection Diagram ............................ 6
8. Specications ........................................ 7
8.1 Supporting Timing Chart..................8
9. Acronyms ............................................... 9
1
1. INTRODUCTION
This is a compact yet versatile HDMI to HDMI Scaler Box. It accepts
HDMI input with a separate Toslink or analog audio and scale it to
HDMI output (at a number of selectable resolutions) with additional
Toslink and analog audio output.
This Scaler Box has a comprehensive OSD menu that allows user
to select a variety of output resolutions and adjust for best picture
quality. It is ideal for using between incompatible HDMI source and
display by changing picture resolution and frame rate of HDMI source
to match the native resolution of the HDMI display.
2. APPLICATIONS
• Displaying HDMI contents on to HDMI display
• Household HDMI signal enlargement on to HDTV and audio
equipment
• Lecture room/Showroom/Meeting room/Classroom signal display
3. PACKAGE CONTENTS
• 1 x HDMI to HDMI Scaler
• 1 x 5 V/2.6 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as DVD/Blu-ray player and output
display with HDMI input jack and audio amplier.
2
5. FEATURES
• HDMI, HDCP and DVI compliant
• Supports full range of PC resolution from VGA ~ WUXGA (RB) and
HD resolution from 480i~1080p
• Automatically detect the factory setting of the connected display
and output the corresponding resolution and refresh rate, when
the NATIVE output is selected
• Supports 50/60Hz frame rate conversion
• Supports 3-D motion video adaptive, 3-D de-interlacing, and 3:2/2:2
pull-down detection and recovery
• Provides output picture adjustment on contrast, brightness, hue,
saturation, sharpness, RGB (color tone) level and aspect ratio size
• Supports stereo LPCM analog/digital audio input and stereo LPCM
analog/digital output by selecting among the audio input sources
in the OSD menu and simultaneously output to HDMI, Optical and
phone jack
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI AUDIOTOSLINK SERV.
INPUT DC 5V
1 2 3 4 5 6
1HDMI INPUT: Connect from source equipment such as PS3/Blu-ray
player with HDMI cable.
2AUDIO INUPT: Connect from the audio source equipment such as
PC/Laptop with 3.5mm phone jack for analog audio signal input.
3TOSLINK INPUT: Connect from the audio source equipment such as
DVD/Blu-ray player with optical cable for digital audio signal input.
4SERV.: This port is reserved for rmware update only.
5DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
6Power LED: This LED will illuminate once the device is connected
with power supply.
4
6.2 Rear Panel
HDMI AUDIO
MENU +
-
TOSLINK
OUTPUT
4
1 2 3 5
1HDMI OUTPUT: This slot is to connect with HDMI TV/Monitor for
output image display.
2TOSLINK OUTPUT: Connect to an amplier or active speaker with
optical cable for audio output.
3AUDIO OUTPUT: Connect to an amplier or active speaker with
3.5mm phone jack for audio output.
4MENU: Press this button to enter into the OSD menu and press it
again to enter into the selection.
5+/- button: Press these buttons to
a. move up/down the OSD selection,
b. to adjust the value,
Under normal operation (outside of OSD selection)
c. Press “-“ together with “MENU” to switch output resolution to
720P@60 instantly,
d. Press “+” together with “MENU” to switch output resolution to
XGA@60 (1024x768) instantly
e. Press both “+” together with “-“ to set the device back to
factory reset setting.
5
6.3 OSD Menu
Main Menu 1st layer 2ND layer
PICTURE SETTING CONTRAST 0~100 (50)
BRIGHTNESS 0~100 (50)
EXIT
FINETUEN HUE 0~100 (50)
SATURATION 0~100 (50)
SHARPNESS 0~100 (50)
NR OFF/LOW/MIDDLE/HIGH (OFF)
EXIT
COLOR SETTING RED 0~100 (50)
GREEN 0~100 (50)
BLUE 0~100 (50)
EXIT
OUTPUT SETTING SIZE FULL/OVERSCAN/
UNDERSCAN/LETTER BOX/
PANSCAN/ASPECT (FULL)
RESOLUTION 640x480@60 / 800x600@60 /
1024x768@60 / 1280x1024@60
/1400X1050@60 /
1600x1200@60 / 1280X800@60
/ 1440x900@60 /1680x1050@60
/ 1920x1200@60RB / 1600X900
/ 480P / 576P / 720P@50/
720P@60 / 1080I@50 /
1080I@60 / 1080P@50 /
1080P@60
EXIT
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CPLUS-V2PE Manual de usuario
CYP
CYP CPT-387 Manual de usuario
CYP
CYP CP-1262DE Manual de usuario
CYP
CYP AU-D2 Manual de usuario
CYP
CYP AU-11DM Manual de usuario
CYP
CYP CETH-4HDMI Manual de usuario
CYP
CYP CP-251F Manual de usuario
CYP
CYP AU-D250 Manual de usuario
CYP
CYP CM-345S Manual de usuario
CYP
CYP CPLUS-V10E Manual de usuario
CYP
CYP SY-P290 Manual de usuario
CYP
CYP CSC-V101P Manual de usuario
CYP
CYP CLUX-2EN Manual de usuario
CYP
CYP CDPH-1S Manual de usuario
CYP
CYP AU-D4T Manual de usuario
CYP
CYP CDPS-41SQ Manual de usuario
CYP
CYP CS-802D Manual de usuario
CYP
CYP DCT-25 Manual de usuario
CYP
CYP CDPS-US100R Manual de instalación
CYP
CYP CSLUX-300 Manual de usuario
