CYP CPLUS-V2PEL Manual de usuario

CPLUS-V2PEL

4K UHD+HDMI to Dual HDMI Scaler

with Signal Event Automation

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 18/05/18 Preliminary release

VS1 21/05/18 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 OSD Menu.................................................. 5

6.4 RS-232 Control ......................................... 15

6.5 RS-232 Commands.................................. 15

7. Connection Diagram ....................................27

8. Specications ................................................28

8.1 Technical Specications ........................ 28

8.2 Video Specications............................... 29

8.2.1 Supported Resolutions................... 29

8.2.2 4K Conversion Rules....................... 30

8.3 Audio Specications............................... 31

8.4 Cable Specications .............................. 32

9. Acronyms .......................................................32

1. INTRODUCTION

This HDMI 4K UHD Scaler with Test Patterns and Signal Event

Automation is designed to upscale 1080p signals into 4K UHD (18Gbps)

or downscale 4K UHD (18Gbps) signals into 1080p with synchronized

digital audio output. A friendly and simple interface design allows

the user to control the unit while viewing the OSD directly on the

HDMI outputs. The input signal can be output to both HDMI outputs

simultaneously with a different resolution on each or the unit can

generate a test pattern at a preferred video resolution for easy on-site

display testing and validation.

Additional functionality such as EDID and HDCP management, and

basic signal event automation (via RS-232 or CEC) is also provided.

This UHD Scaler is the best tool to use with your HD and UHD signals.

This unit can be controlled easily by use of the front panel controls (with

OSD) or by RS-232.

2. APPLICATIONS

• HDMI signal splitting

• On-site equipment testing

• Production testing

• R&D design and testing

3. PACKAGE CONTENTS

• 1×HDMI to Dual HDMI Scaler

• 1×5V/2.6A DC Power Adapter

• 2×3-pin Terminal Block to 9-pin D-sub Adapter Cable

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI input source equipment such as a media player, video game

console or set-top box.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES

• HDMI input and output with 18Gbps (600MHz) 4K UHD with HDR

support

• DVI 1.0 compliant with the use of an HDMI-DVI adaptor

• HDCP 2.2 and HDCP 1.x compliant

• 1 HDMI input and 2 HDMI outputs

• Supports HDCP 2.2 to HDCP1.4 conversion

• HDMI signal bypass on both outputs or upscales 1080p signals to 4K

on output B and downscales 4K signals to 1080p on output A

• Supports HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit)

• Supports 4K HDR at 24/30Hz (YUV 4:4:4) and 50/60Hz (YUV 4:2:0) with

up to 12- bit color

• Supports 16-bit Deep Color up to 1080p@60Hz

• Supports pass-through of many audio formats including LPCM

2.0/5.1/7.1, Bitstream, and HD Bitstream

• Supports color space conversion of 4K@50/60Hz (4:4:4, 8-bit) or

4K@any (10/12-bit) sources

• Integrated EDID and HDCP management

• Basic signal event automation (via RS-232 or CEC)

• Test pattern generation at selected resolutions for on-site display

testing

• Controllable via front panel with OSD, and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERV.

POWER 4K2K SYNC MENU PATTERN

TEST

ENTER

1 2 3 4 5 6 7

1SERV.: This slot is reserved for rmware update and EDID upload

use only.

2POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

34K2K LED: This LED will illuminate when the input source contains a

4K UHD signal.

4SYNC LED: This LED will illuminate when the input source is sending

signal.

5MENU Button: Press to enter the OSD menu, or to back out from

menu item.

6 − & +/TEST PATTERN Buttons: When the OSD menu is in use, press

these buttons to move within the menu. Outside of the OSD,

press these buttons together to instantly set the output timing to

1280x720@60Hz and display test patterns on both outputs.

7ENTER Button: Press to conrm a selection within the OSD or to go

deeper into a menu item.

6.2 Rear Panel

HDMI IN HDMI OUT RS-232

DC 5V

A B

OUT

1 2 3 4

1HDMI IN: Connect to HDMI source equipment such as a media

player, game console or set-top box.

2HDMI OUT A~B: Connect to HDMI TVs, monitors or ampliers

for digital video and audio output. Each output can display a

different resolution with a choice between the HDMI source or a

test pattern.

3RS-232: Connect the upper 3-pins directly to a PC, laptop or other

serial control device to send RS-232 commands to control the unit.

Connect the lower 3-pins directly to a serial controllable device to

send signal event automation RS-232 commands to it.

4DC 5V: Plug the 5V DC power adapter into the unit and connect it

to an AC wall outlet for power.

6.3 OSD Menu

All primary functions of this unit can be controlled by using the OSD (On

Screen Display) which is activated by pressing the Menu button on

the front of the unit. Use the + (PLUS), − (MINUS), and ENTER buttons to

navigate the OSD menu. Press the Menu button to back out from any

menu item and then press it again to close the menu.

MAIN MENU STRUCTURE

Output

EDID

HDCP

OSD

Test Pattern A

Test Pattern B

Information

Firmware Update

EDID Upload

Factory Setting

The individual functions of the OSD will be introduced in the following

section. Items marked in BOLD are the factory default settings.

OUTPUT

2nd Level 3rd Level

Output A

Input 4K2K PASS THROUGH

Down Scaler 1080P

Fix Color YUV 4:2:0

Fix Deep Color 8 bit

YUV 4:2:x to RGB

Fix Color RGB

Output B

Input 1080P PASS THROUGH

Tabla de contenidos

Otros manuales de Convertidor de medios de CYP

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Expert

Expert EX-9543 Manual de usuario