CYP CDPS-4H4HFS Manual de usuario

DRAFT

CDPS-4H4HFS

4 by 4 HDMI 4Kx2K Matrix

Operation Manual

DRAFT

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 March 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

DRAFT

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 17/02/14 Preliminary Release

DRAFT

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................5

6.3 OSD Menu.........................................5

6.4 Remote Control..............................11

6.5 RS-232 Protocols .............................13

6.6 RS-232 Commands.........................14

6.7 Web GUI Control ............................17

7. Connection Diagram .......................... 19

8. Specications ...................................... 20

9. Acronyms ............................................. 22

DRAFT

1. INTRODUCTION

The 4 by 4 HDMI matrix which allows HDMI signal from any of its four

sources to be routed to and displayed on any of its four connected

HDMI displays simultaneously. With fast switching technology the

device can greatly eliminate the time required by swapping or

turning ON/OFF the connected displays. It supports 4Kx2K, 3D, 36-bit

Deep Color, Hi-Def lossless audio and other features dened by HDMI

specications. The management of source/sink scenarios can be

operated easily through on-panel buttons, IR remote control, RS-232 or

Ethernet protocol.

2. APPLICATIONS

• Home Theater/Entertainment

• Lecture Room/Hall Presentation

• Show Room/Demo Room

• Public Commercial Display

• Information Board

3. PACKAGE CONTENTS

• 4 by 4 HDMI 4Kx2K Matrix

• Remote Control with Battery

• Left & Right Rack Ears

• 5V/2.6A DC Power Adaptor

• IR Receiver Cable

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipments such as Blu-ray/DVD/PS3 player or Set-

Top-Box and output HDMI TV/Display and or audio amplier with

connection cables.

DRAFT

5. FEATURES

• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant

• Supports four HDMI inputs and four HDMI outputs

• Displays any of four High-Denition sources on four HDTV displays

simultaneously with fast switch

• 3DTV Pass-Through

• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30 &

4096x2160@24Hz)

• Supports data rate from 300Mbps to 3Gbps and Deep Color up to

1080p 36-bit

• Supports individual EDID or common EDID

• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH

(Pass through), Dolby TrueHD and DTS-HD Master Audio

• Input port HDCP support Standard and Apple mode. The Apple

mode selection to guarantees the use of Apple devices

DRAFT

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

IN 1 IN 2IN 3IN 4TAKE

OUT A OUT B OUT C OUT DCANCEL

ENTER

PRESET

ALL

MODE

LOCK

4K UHD

4X4 HDMI MATRIX FAST SWITCH CDPS-U4H4HFS

1 2 3 5 7 9 10 12 14

4 6 8 11 13

1POWER: Press this button to turn ON the device and the LED will

illuminated.

2IR Window: This IR Receiver receives the remote control signal from

the package include remote control only.

3IN 1~4: Press these IN buttons to select an input from the 4 input

sources.

4OUT A/D: Press these buttons once a time along with an IN buttons

to select an input source for an output display. i.e. OUT A→

IN1→TAKE or OUT B→ IN4→TAKE.

5TAKE: Press this button to conrm the selection of an IN and an OUT

button.

6CANCEL: Press this button to cancel the IN/OUT selection.

7ENTER: Press to conrm the selection.

8MENU: Press to enter into the menu.

9+/-: Press these buttons to move up/down under menu selection.

10 PRESET: Press “PRESET”, the OLED menu will show Preset then select

IN 1~4. Preset 1~4 after the selection, press “TAKE” to conrm the

selection or press “CANCEL” to cancel the selection.

11 All: Press this button to select all outputs to display with an input

source.

12 MODE: TAKE Mode/R.T.(Real Time) mode switch.

13 LOCK: Press this button to lock all button functions on the panel.

Press 3 seconds to relieve the lock function.

14 LCM: Displaying Input and Outputs selection and menu selection.

DRAFT

6.2 Rear Panel

CONTROLSERVICE

HDMI IN HDMI OUT

1234ABCD RS232 IR IN DC 19V

1 2 3 4 5 6 7

1HDMI IN: Connect from source equipments such as Blu-ray/DVD/

PS3 players, Set-Top-Box or any HDMI equipped source device for

input signal sending.

2HDMI OUT: Connect to HDMI TV/display or HD Amplier for output

image and or audio display.

3SERVICE: This slot is reserved for rmware update use only.

4CONTROL: Connect from PC/Laptop with active internet service

for Web GUI control with RJ-45 terminated cable.

5RS232: Connect from PC/Laptop for RS-232 command sending to

control the device.

6IR IN: Connect the IR Receiver included in the package for IR

signal receive from the included remote control.

7DC 5V: Connect the adaptor with power cord included in the

package and connect to AC wall outlet for power supply.

DRAFT

6.3 OSD Menu

Main Menu Sub Menu Description Default

EDID Mode All All Input port is using same

EDID.

In menu “EDID All”, can

select suitable EDID.

All

Appoint Each Input port can select

individual EDID.

In menu “EDID IN1~4” select

suitable EDID.

Exit

Tabla de contenidos

Otros manuales de Conmutador de matriz de CYP

CYP

CYP CPLUS-V8H8HP Manual de usuario

CYP

CYP EL-41S-4K Manual de usuario

CYP

CYP OR-HD88HC Manual de usuario

CYP

CYP PU-8H8HBTE-4K Manual de usuario

CYP

CYP OR-42CD-4K22 Manual de usuario

CYP

CYP SM-4X2-HDMI-LC Manual de usuario

CYP

CYP OR-44-4K22 Manual de usuario

CYP

CYP PUV-1082PL-4K22N Manual de usuario

CYP

CYP CPLUS-V4H4H Manual de usuario

CYP

CYP CMSI-1616 Manual de usuario

CYP

CYP OR-YUV44S Manual de usuario

CYP

CYP PUV-1210PL-RX Manual de usuario

CYP

CYP CDPS-44SM Manual de usuario

CYP

CYP PU-8H8HBTL Manual de usuario

CYP

CYP MOD-32 Manual de usuario

CYP

CYP CFSW-51MHL Manual de usuario

CYP

CYP CMSI-8H8HS Manual de usuario

CYP

CYP CPLUS-1082CVAL Manual de usuario

CYP

CYP CPLUS-V8H8HP Manual de usuario

CYP

CYP Elpro Video Labs CDPS-UC4H4HFS Manual de usuario

CYP

CYP CMSI-8H8CVE Manual de usuario

CYP

CYP CDPS-44SM Manual de usuario

CYP

CYP PU-O4H4C Manual de usuario

CYP

CYP OR-44VWC Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario