CraftBot FLOW IDEX DOME Manual de usuario

CRAFTBOT FLOW IDEX / IDEX XL

DOME INSTALLATION MANUAL

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2. ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

3. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

4. REACH IN INTO THE PRINTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

4.1. Reach in from below . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

4.2. Reach in from the top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

TABLE OF CONTENTS

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

1. INTRODUCTION

For best print quality, some ﬁlaments may need to stabilize the build area temperature. This can signiﬁcantly reduce

the possibility of warping printed objects.

That’s why we also oﬀer the elegant and durable printer cover and door for Crabot printers.

Learning from previous feedback, the dome now consists of two parts so that we can easily reach the machine if

necessary. The door was ﬁed with an electric lock so that we could even open it remotely.

This manual walks you through the steps of installing the dome.

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

2. ACCESSORIES

Below you can see contents of the box. First of all, check the list to make sure nothing is missing!

1. Front cover (1x)

2. Rear cover (1x)

3. Screws (12x)

Tools needed: 2.5mm allen key

Installation time: 10 mins

3. INSTALLATION

Please follow the steps listed below to assemble the dome.

• Remove the ﬁlament spool holder.

• Remove the ﬁlament tube holder.

• Remove the screws marked with an arrow on the top cover of the printer. (6x)

• Place the rear cover to the printer. Please be sure, the cover sits properly on the printer’s top cover.

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

• Aach the ﬁlament spool holders. Use the supplied longer screws. (2x)

• Aach the ﬁlament tube holders. Use the supplied longer screws. (2x)

• Aach the ﬁlament guide tubes.

• Insert the tubes back into the extruders.

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

• Aach the front of the dome. Use the supplied longer screws. (2x)

• Place the front cover to the printer. The cover goes under the rear cover.

• Make sure the ﬁlament guide tubes are between the brushes, and not pinched by the cover itself.

• If necessary, ﬁx the front cover with the supplied screws. (2x)

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

• Connect the dome fan.

• Adjust the dome fan speed in Seings / Fan / Others menu.

FLOW IDEX / FLOW IDEX XL DOME

INSTALLATION MANUAL

www.craftbot.com

4. REACH IN INTO THE PRINTER

For ﬁlament change and maintenance it is necessary to reach into the printer.

To avoid accidents, it may be necessary to secure the front cover. In this case, the fastest way to change the ﬁlament

is to reach out from below.

4.1 Reach in from below

• Lower the build plate to allow suﬃcient space for your arm. (Axes menu, Z arrow downwards)

• Disengage the motors, and move the extruders to the back / middle of the build area.

• Reach in, and perform the necessary operation.

4.2 Reach in from the top

• Remove the front cover.

• Reach in, and perform the necessary operation.

CraBot is made in the EU.

CONTACT:

CraUnique Ltd.

Salgótarjáni str. 12-14.

Budapest 1087, Hungary

Phone: +36 1 700 8060

Web: www.crabot.com • www.crabotusa.com

Cooperation between 3D printer and people has never been easier.

Get in touch!

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora 3D de CraftBot

CraftBot

CraftBot FLOW IDEX XL Manual de usuario

CraftBot

CraftBot Flow Manual de usuario

CraftBot

CraftBot CB4 FLOW Series Manual de usuario

CraftBot

CraftBot Flow Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

CraftBot

CraftBot FLOWGENERATION FLOW Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

CraftBot

CraftBot CB4 FLOW Series Manual de usuario

CraftBot

CraftBot Plus Manual de usuario

CraftBot

CraftBot FLOW GENERATION IDEX Manual de usuario

CraftBot

CraftBot FLOW WIDE XL Manual de usuario

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario

LONGER

LONGER LK4 Pro Manual de usuario