Cognex DataMan 300 Series Manual de usuario
COGNEX®
DataMan®300 Series
Quick Reference Guide
ii DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide iii
Section Title •Page 2
1Getting Started About DataMan 300 Series • For More Information •
DataMan 300 Series Accessories • DataMan 300 Systems Page 4
1
DataMan Software Page 47
3Installing DataMan Software and Connecting the Reader
• Start the Setup Tool • Troubleshooting • Setup Tool
Menu Bar • Industrial Protocols • Test Mode • Triggering
• Read Setups • Tuning • Image Filtering • Training the
Reader • Scripting • Package Detection
1Connections, Optics, and Lighting Page 69
4External Light Control • I/O Cable • High-Speed Output
Lines • High-Speed Output Wiring • Ethernet M12 to
RJ45 Cable • Acquisition Triggering
1Compliance Information, Warnings
and Notices Page 78
5Warnings and Notices • Compliance Statements •
DataMan 300 Series Specications
Setting Up Your DataMan Reader Layout • Installing the Lens • Installing a Filter •
Installing a Filter in a Flat LED Front Cover • External Light
Mounting Brackets • Setting Focus • Field of View and
Reading Distances • Dimensions • DataMan 300 Series
Imager Specications
2Page 10
4 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 5
About DataMan 300 Series Readers For More Information...
DataMan 300 series readers are
high-performance, xed-mount
ID readers that among others
offer the following advanced
features:
• Highest Read Rates on 1-D
and 2-D codes
• Most exible optics and
lighting
• Intelligent tuning and express
setup
DataMan 300 series readers provide advanced Ethernet connectivity, support
for serial RS-232 and discrete I/O, as well as advanced options for lighting and
optics.
DataMan 300 series readers are packaged in a rugged, IP65-rated housing,
and they provide numerous ease-of-use features, including one button to
trigger and one to start tuning.
This document provides basic information about how to congure and
use DataMan 300 series readers. Additional information is available
through the Windows Start menu or the Setup Tool Help menu after
you install the DataMan software on your PC:
DataMan Fixed Mount Readers Reference is a complete
online hardware reference for the DataMan xed-mount ID
readers.
Cognex->DataMan Software v x.x->Documentation->English->DM300 Series
->Fixed Mount Reference Manual
DataMan Communications & Programming Guide shows
how to integrate your DataMan reader with your automation
software and factory network.
Cognex->DataMan Software v x.x->Documentation->Communications &
Programming
DataMan Reader Conguration Codes provides printable
2-D codes that you can use to congure the DataMan reader.
Cognex->DataMan Software v x.x->Documentation->English->Reader Conguration
Codes
DataMan Questions and Answers provides context-sensitive
information. You can view this help inside the Setup Tool or as
a stand-alone help le.
Cognex->DataMan Software v x.x->Documentation->DM300 Series->Questions and
Answers
Release Notes list detailed system requirements and
additional information about this DataMan software release.
Cognex->DataMan Software v x.x->Documentation->DataMan v x.y.z Release Notes
2
Coaxial (DOAL) light (CLRO-K5050G1)
Ring light (CLRR-R7030G1CLR)
Spot light (CLRS-P14G1)
Dark-eld light (CLRD-D120G1)
Back light (CLRB-F100100G1)
Ethernet M12 to RJ45 cable
(CCB-84901-y00x-xx) (y straight/angled, x-xx species
length)
8
11 12
6
14
14 15
15
13
6 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 7
DataMan 300 Series Accessories
Connection cable 24V, I/O, RS-232 (CCB-M12x12Fy-xx)
(y straight/angled, xx species length)-(layout on pg.62)
Liquid lens module and pre-focused 10.3 mm
M12 lens with wrench (DM300-LENS-10LL)
C-Mount cover for C-Mount lenses
(DM300-CMCOV)
10.3 mm M12 lens with locking (DM300-LENS-10)
Diffuse lens cover with red LED illumination
(DM300-DLCOV-RE)
LED front cover (DM300-CLCOV)
Clear lens cover (DM300-CLCOV)
External light cable (CCB-M12x4MS-xxx) (xxx species
length)
1
1
2
3
4M12/S-MOUNT LENS OPTIONS
LENS COVERS
7
8
11
7
18
19 20
EXTERNAL LIGHTS (RED LED)
27
28
29
27
28
CABLES
18
19
20
Diffuse lens cover with blue LED illumination
(DM300-DLCOV-BL)
Diffuse lens cover with IR LED illumination
(DM300-DLCOV-IR)
10.3 mm IR M12 lens with locking
(DM300-LENS-10-IR)
Liquid lens module and pre-focused 10.3 mm IR
M12 lens with wrench (DM300-LENS-10LL-IR)
54
6
5
9
10
10
13
16 17 16
17
HIGH POWER ILLUMINATIONS
23 24 25
21 22
White narrow (DM300-HPIA-WHI)
Red narrow (DM300-HPIA-625)
Red wide (DM300-HPIA-625-W)
DM500 C-Mount cover (DM500-
CMTLC-000)
Blue narrow (DM300-HPIA-470)
23
24
25
21
22
26
26 DM500 Lens cover extender
(DM500-LNSEXT-000)
30
30
I/O extension cable, 5m straight (CKR-200-CBL-EXT)
Connection cable RS-232
(CCB-M12xDB9Y-05)
31
31
32
29
32
Connection cable 24V, I/O, RS-232 (CCBL-05-01)
(layout on pg.63)
Clear lens cover with white LED illumination
(DM300-CLCOV-WHI)
Short C-Mount cover for C-Mount
lenses (DM300-CMCOV-SH)
3
6
16 mm M12 lens with locking (DM300-LENS-16)
19 mm liquid lens module (DM300-LENS-19LL)
Extension kit (DM300-EXT)
25 mm M12 lens with lens spacer and hex
wrench (DM300-LENS-25) (also requires item )
9
Polarizer lens cover with red LED illumination
(DM300-PLCOV-RE)
12
24V power supply (ACC-24l)
24V power supply (PS-KIT-1)
38
38
CD-ROM (Setup Tool and Drivers) (206-6400-440)
Quick Reference Guide (this document) (590-7168)
Basic accessory kit: 5m straight power/IO cable,
universal mounting bracket, CD-ROM, and printed
QRG (DM300-BAK-000)
39
External light mounting brackets
(DM300-ELMB-xx) (xx species light
type) (may get used in combination
with DM500-BRKT-000 if pivoting is
required)
35 35
36
36
37
8 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 9
DataMan 300 Systems
Omni-
directional
1-D Code
Reading
1DMax+™
— Best-
In-Class
1-D
Reading
IDQuick™
— High-
Speed
2-D
Reading
2DMax+™
— for
hard
to read
DPM and
damaged
2-D codes
Resolution
DataMan 300L
(DMR-300L-00) √ 800x600
DataMan 300X
(DMR-300X-00) √ √ √ √ 800x600
DataMan 302L
(DMR-302L-00) √ 1280x1024
DataMan 302X
(DMR-302X-00) √ √ √ √ 1280x1024
DataMan 303L
(DMR-303L-00) √ 1600x1200
DataMan 303X
(DMR-303X-00) √ √ √ √ 1600x1200
Universal Mounting Bracket
(DM100-UBRK-000)
Pivot Mounting Bracket
(DM100-PIVOTM-00)
POWER SUPPLIES
33
34
33 34
MOUNTING BRACKETS
KIT, CD-ROM, AND DOCUMENTATION
40
39
40
DataMan 300 Series Accessories (Continued)
37
Mounting holes
(M3 x 5mm)
Trigger
button
Tuning
button
Peak meter
Power
Train status
Good/
bad read
Network Error
Power,
I/O,
and
RS-232 External light
control
10 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 11
Reader Layout
Laser safety notice
Laser aimer
Can be enabled
under Light and
Imager Settings
in the Setup
Tool (disabled by
default) to aid in
aiming the lens
Illumination LED clusters
External
illumination
mounting
points
Ethernet
The following image shows the built-in lighting system of the DataMan 300
series reader, underneath the plastic lighting cover.
NOTE: The image below shows the two different front covers: the cover with front-
mounted lter and the at cover with an internal lter.
• Power: GREEN = Power ON
• Train status: GREEN = trained / YELLOW = untrained
• Good/bad read: GREEN = good read / RED = bad read
• Network: YELLOW = link up / BLINK = activity
• Error: RED = error, check device log
• Peak meter: decode yield, train/tune progress/quality
You can choose between a variety of different S-Mount/M12 (including variable-
focus liquid lens module) and C-Mount lens options to be installed on your
DataMan 300 series reader.
WARNING: Make sure your reader is
unpowered before installing the lens.
2
3
4
1. Connect the reader to the Setup Tool.
2. On the Results Display pane, check the Focus Feedback option and
enable Live Display. For best results, adjust your camera settings to
make sure you have a brightened and high contrast image.
3. Use the DataMan Focus Target template, available through the
Windows Start menu or the Setup Tool Help menu, to align the edge
of the reader body to the line marked with the target distance used
in your application.
4. Adjust focus for maximum sharpness. Enhance image quality in the
Setup Tool for better guidance.
Press the rubber lens-locking cone into the reader.
While carefully avoiding rotating the lens, press the rubber lens cone
into the reader until it snaps into place around the nose of the lens.
12 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 13
Installing the Lens
Remove lens plug.
1
Installing M12 lens with Manual Focus
Thread the lens into the reader.
Place the reader at the desired working distance from focus target.
After xing the lens, verify focus position again, using the steps above.
Light connector
OR:
OR:
14 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 15
5Tighten the lens.
6Attach front cover.
7Insert and tighten screws.
Installing the Lens (Continued)
Tighten in
sequence.
Torque limit:
9 Ncm (0.08
in-lbs).
Remove the protection lm
applied to the front cover
before usage!
1
2
3
4
PHILLIPS PAN HEAD M2 X 6MM
1Remove the lens plug as described in Step 1 on page 12 above.
2
3
Snap the liquid lens module onto the nose of the lens, making sure
that it lies at.
Tighten the locking ring.
4Connect the liquid lens cable to the reader.
Thread the lens into the reader.
16 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 17
Installing a Liquid Lens
5
Installing the Lens (Continued)
7
1. Connect the reader to the Setup Tool.
2. On the Results Display pane, check the Focus Feedback option and
enable Live Display.
3. Use the DataMan Focus Target template, available through the
Windows Start menu or the Setup Tool Help menu, to align the edge
of the reader body to the line marked with the target distance used
in your application.
4. Adjust focus for maximum sharpness. Enhance image quality in the
Setup Tool for better guidance.
Place the reader at the desired working distance from focus target.
Light connector
OR:
OR:
18 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 19
1
2
3
4
Tighten in sequence.
Torque limit: 9 Ncm
(0.08 in-lbs).
Insert and tighten screws.
6
Installing the Lens (Continued)
Attach front cover.
5
PHILLIPS PAN HEAD M2 X 6MM
Otros manuales para DataMan 300 Series
7
Tabla de contenidos
Otros manuales de Lector de código de barras de Cognex
Cognex
Cognex DataMan 8600 Series Manual de usuario
Cognex
Cognex DataMan 70 Manual de usuario
Cognex
Cognex DataMan 50 Manual de usuario
Cognex
Cognex DataMan DT150 Manual de usuario
Cognex
Cognex DataMan 100 Manual de usuario
Cognex
Cognex DataMan 300 Series Manual de usuario
Cognex
Cognex DataMan 300 Series Manual de usuario
Cognex
Cognex DataMan 475 Manual de usuario
Cognex
Cognex DataMan 8000 Series Manual de usuario
Cognex
Cognex DataMan 503 Manual de usuario
Cognex
Cognex DM 8072DL Manual de usuario
Cognex
Cognex DataMan 280 Series Manual de usuario
Cognex
Cognex DataMan 8072 Verifier Manual de usuario
Cognex
Cognex DataMan 8072 DL Manual de usuario
Cognex
Cognex DataMan 503 Manual de usuario
Cognex
Cognex DataMan 150 Series Manual de usuario
Cognex
Cognex DataMan 8600 Series Manual de usuario
Cognex
Cognex DataMan 302L Manual de usuario
Cognex
Cognex DataMan 8600 Series Manual de usuario
Cognex
Cognex DataMan 8072 DL Manual de usuario
