Cognex DataMan 60 Series Manual de usuario
COGNEX®
DataMan®60
Quick Reference Guide
ii DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide iii
Section Title •Page 2
1Getting Started General Information and Imager Specications • For
More Information • DataMan 60 Systems • Reader
Layout • DataMan 60 Accessories
Page 4
1
DataMan Software Page 17
3Installing DataMan Software and Connecting the Reader
• Troubleshooting an Ethernet Connection • Industrial
Protocols • Triggering
1Connections, Optics, and Lighting Page 23
4I/O Cable • USB/RS-232 & Flying Leads I/O Cable •
Digital Input and Output Wiring Diagrams • Illumination
Strobe Output • Multi-Port Connections
1Compliance Information, Warnings
and Notices Page 40
5DataMan 60 Specications • Warnings and Notices •
Compliance Statements
Setting Up Your DataMan Setting the Focus Position • Field of View and Reading
Distances • Dimensions
2Page 11
4 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 5
General Information and Imager Specications For More Information...
DataMan 60 is a compact xed-
mount ID reader that among
others offers the following
advanced features:
• Smallest high-performance
xed mount reader
• Highest read rates for 1-D and
2-D codes
• Reliability and image feedback
DataMan 60 readers support RS-232, USB, and Ethernet interface connections
plus discrete I/O.
The DataMan 60 reader is packaged in an IP40-rated housing.
This document provides basic information about how to congure and
use the DataMan 60 reader. Additional information is available through
the Windows Start menu or the Setup Tool Help menu after you install
the DataMan software on your PC:
DataMan Fixed Mount Readers Reference is a complete
online hardware reference for the DataMan reader.
Cognex->DataMan Software v x.x->Documentation->English->DM60->Fixed Mount
Reference Manual
DataMan Communications & Programming Guide shows
how to integrate your DataMan reader with your automation
software and factory network.
Cognex->DataMan Software v x.x->Documentation->Communications &
Programming
DataMan Reader Conguration Codes provides printable
2-D codes that you can use to congure the DataMan reader.
Cognex->DataMan Software v x.x->Documentation->English->Reader Conguration
Codes
DataMan Questions and Answers provides context-sensitive
information. You can view this help inside the Setup Tool or as
a stand-alone help le.
Cognex->DataMan Software v x.x->Documentation->English->DM60->Questions and
Answers
Release Notes list detailed system requirements and
additional information about this DataMan software release.
Cognex->DataMan Software v x.x->Documentation->DataMan v x.y.z Release Notes
Specication DataMan 60 Imager
Image Sensor 1/3 inch CMOS
Image Sensor Properties 4.51 mm x 2.88 mm (H x V), 6.0 µm square
pixels
Image Resolution
(pixels)
752 x 480
Electronic Shutter Speed 18 µs to 25 ms exposure
Image Acquisition up to 60 fps at full resolution
Lens Type 3 focal position M12 lens
The following image shows the characteristics of the DataMan 60 reader.
6 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 7
DataMan 60 Systems
Aimer LED
Internal
illumination
3-position
lens cap
External
illumination
connector
Omni-directional
1-D Code Reading
IDQuick™ —
Well marked 2-D Code
Reading
1DMax+™ with
HOTBARS™
DataMan 60L
(DMR-60L-00) √
DataMan 60QL
(DMR-60QL-00) √ √
DataMan 60S*
(DMR-60S-00) √ √ √
*S model limitations: Maximum decode rate of 5 codes / sec; maximum 2
reads / sec; maximum 2 frames / sec; in all trigger modes (no work-around in
read setups or scripting)
Lens
Focal position
indicator
Status LEDs
DataMan 60 Reader Layout
• Power: YELLOW = Power ON
• Communication: Flashing YELLOW
• Good/bad read: GREEN = good read / RED = bad read
• Error: RED = error, check device log
8 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 9
Ethernet
RJ-45
connector
Directly
connected cable
terminating in a
DB15 connector
providing: power,
I/O, USB, and RS-
232 connectivity
mounting
points
DataMan 60 Accessories
8
9
USB Cable, 1.5 m
(DM100-USB-000)
1
2
CABLES
9
RS-232 Cable, 1.5 m
(DM100-RS232-000)
7
4
USB Cable, 3 m
(DM100-USB-030)
5Extension Cable, 5 m
(DM100-EXTCBL-000)
6
3
RS-232/USB adapter connector
(DM100-PATCH-000)
USB & Flying Leads I/O Cable, 2.0 m
(DM-USBIO-00)
RS-232 & Flying Leads I/O Cable, 2.5 m
(DM-RS232IO-00)
1
2
5
3
4
6
8
Ethernet Cable: use any standard
CAT5/5e, SF/FTP or S/FTP cable
DataMan 60 Reader Layout (Continued)
Flying Leads Connection Cable, 5 m
(DM50-PWRIO-05) 7
10 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 11
DataMan 60 can operate in one of three distance ranges. To set the
focus position:
Remove lens cover.
Setting the Focus Position
1
2Set focus position to 45, 70, or 110. Turn the lens cap clockwise
(45->70->110) for larger focus settings; turn the lens cap counter-
clockwise (110->70->45) for smaller settings.
3Reattach the front cover.
DataMan 60 Accessories (Continued)
CONTROL BOX
Control Box (DM-CTRLBOX-00)
13 13
10
11
MOUNTING BRACKETS
POWER SUPPLY
Pivot Mounting Bracket
(DM100-PIVOTM-00)
Power Supply, 6V
(DM100-PWR-000)
10
11
Universal Mounting Bracket
(DM50-UBRK-000)
12 12
100
mm
in
0
0
3
200
6
20 40 60 80 120 140 160 180
1 2 7
40
40
60
60
4 5
0
mm
in
0
1
1
20
20
2
2
36 mm (1.4 in)
56 mm (2.2 in)
80 mm (3.15 in)
6 mil 33-51 mm (1.2-2 in)
8 mil 31-57 mm
(1.2-2.2 in)
10 mil 27-60 mm
(1-2.3 in)
4 mil 34-51 mm (1.3-2 in)
6 mil 30-56 mm (1.1-2.2 in)
2-D
1-D
45 mm
12 mil 25-61 mm
(0.9-2.4 in)
10 mil 37-66 mm (1.4-2.5 in)
This chart shows the horizontal eld of view for the DataMan 60 at a range of
working distances, together with the supported range of reading distances at
45 mm focus position.
100
mm
in
0
0
3
200
6
20 40 60 80 120 140 160 180
1 2 7
4 5
70 mm 2-D
6 mil 44-74 mm
(1.7-2.9 in)
8 mil 42-78 mm
(1.6-3 in)
10 mil 39-80 mm
12 mil 34-89 mm
(1.5-3.1 in)
(1.3-3.5 in)
1-D
4 mil
6 mil
10 mil
52-73 mm
45-83 mm
33-89 mm
(2-2.8 in)
(1.7-3.2 in)
(1.2-3.5 in)
This chart shows the supported range of reading distances at 70 mm
focus position.
12 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 13
Field of View and Reading Distances
100
mm
in
0
0
3
200
6
20 40 60 80 120 140 160 180
1 2 7
4 5
10 mil 58-121 mm
(2.2-4.7 in)
12 mil 54-133 mm
(2.1-5.2 in)
6 mil 66-122 mm (2.5-4.8 in)
2-D
1-D
110 mm
58-168 mm (2.2-6.6 in)
10 mil 50-141 mm (1.9-5.5 in)
15 mil
The following table shows the Field of View widths in mm at various distances.
distances in
mm
DM50
45 36
70 56
110 80
Field of View and Reading Distances (Cont.)
This chart shows the supported range of reading distances at 110 mm focus
position.
Observe the following DataMan 60 reader dimensions when installing
your reader.
31.75mm
1.25in
40.96mm
1.61in
53.61mm
2.11in
29.71mm
1.17in
4.61mm
0.18in
23.90mm
0.94in
23.61mm
0.93in
14 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 15
Dimensions
31.75
1.25
40.96
1.61
53.63
2.11
23.61mm
0.93in
The attachment points have the following characteristics:
• M3 thread
• Maximum thread depth: 6 mm
• 1.3 N-m (11.5 in-lb) maximum torque
Caution: Use both attachment points when mounting your device.
TIP: Some applications can benet from mounting the system at a slight angle
(15 degress) to reduce reection from the inspected surface back to the reader.
31.75 mm
1.25”
45.40 mm
1.79”
27.40 mm
1.08”
21.65 mm
0.85”
23.44
0.92
750mm
29.5in
CONNECT YOUR READER
1. Connect the cable on the back of the device to either an USB
adapter cable with power tap or to an RS-232 adapter cable with
power tab.
2. Connect a 6V power supply.
3. Connect the reader to an Ethernet network.
16 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 17
Dimensions (Continued) Installing DataMan Software and
Connecting the Reader
INSTALL DATAMAN SOFTWARE AND CONNECT
1. Check the DataMan Release Notes for a full list of system
requirements.
2. Download the DataMan Setup Tool from http://www.cognex.com/
support/dataman and follow the on-screen steps.
3. Connect the DataMan 60 reader to your PC.
4. Launch the Setup Tool and click Refresh.
Detected readers will appear under the COM ports or Network
devices.
5. Select a reader from the list and click Connect.
18 DataMan 60 Quick Reference Guide DataMan 60 Quick Reference Guide 19
Troubleshooting an Ethernet Connection
Based on your network conguration, the Setup Tool may not be able to
communicate with the reader and it will not appear in the list of Network
devices.
First check your Ethernet connection with the reader and click Refresh in the
Setup Tool. Next, scan the Enable DHCP code in the Reader Conguration
Codes document available from the Start menu. This might allow the reader to
acquire a suitable IP address from a DHCP server on your subnet.
If the reader still does not appear, you can use either the Add Device or Force
Network Settings options in the Setup Tool.
If you know the IP address of the reader, use the Add Device option. If you
do not know the IP address, use the Force Network Settings options. Either
method should allow the DataMan 60 reader to appear in the list of Network
devices so that you can connect to it through the Setup Tool and your
Ethernet connection.
You can also use the RS-232 connection to congure the reader with
parameters that allow it to communicate over your Ethernet network.
Industrial Protocols
The DataMan 60 supports the following industrial protocols:
• EtherNet/IP™
• PROFINET
• MC Protocol
• Modbus TCP
There are three ways to enable or disable Industrial Protocols. Using
either method, a reboot is required for the changes to come into effect.
• Enable the protocols using the Industrial Protocols pane of the
Setup Tool (under Communication Settings).
• Scan the appropriate Reader Conguration codes (see Reader
Conguration Codes available through the Windows Start menu or
the Setup Tool Help menu).
• Send the appropriate DMCC (see Command Reference available
through the Windows Start menu or the Setup Tool Help menu).
For more information on using the industrial protocols, read the
DataMan Communications and Programming Guide available through
the Windows Start menu or the Setup Tool Help menu.
Select industrial
protocol samples and
tools you want to use
when you install the
DataMan Software.
Otros manuales para DataMan 60 Series
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Lector de código de barras de Cognex
Cognex
Cognex DataMan 503 Manual de usuario
Cognex
Cognex DataMan 503 Manual de usuario
Cognex
Cognex DataMan 8600 Verifier Series Manual de usuario
Cognex
Cognex DataMan 8072 Verifier Manual de usuario
Cognex
Cognex DataMan 50 Manual de usuario
Cognex
Cognex DM503 Manual de usuario
Cognex
Cognex DataMan 300 Series Manual de usuario
Cognex
Cognex DataMan 8700 Manual de usuario
Cognex
Cognex DataMan 302L Manual de usuario
Cognex
Cognex DataMan 60 Manual de usuario
Cognex
Cognex DataMan 100 Manual de usuario
Cognex
Cognex DataMan 8050 Manual de usuario
Cognex
Cognex In-Sight SnAPP Series Manual de usuario
Cognex
Cognex DataMan 300 Series Manual de usuario
Cognex
Cognex DataMan 8000 Series Manual de usuario
Cognex
Cognex DataMan 370 Series Manual de usuario
Cognex
Cognex DataMan 8700 DX Manual de usuario
Cognex
Cognex DataMan 370 Series Instrucciones de funcionamiento
Cognex
Cognex DataMan 260 Manual de usuario
Cognex
Cognex DataMan 8700 Manual de usuario
