4
ENGLISH
7. Usethecorrecttoolforthejob.
Do not try to use small tools to perform jobs requiring more powerful tools.
Do not use a tool for a purpose for which it was not designed, e.g. using a
circular saw for lopping off tree branches.
8. Wearsuitableclothing.
Do not wear loose-tting clothing or jewellery; they could get caught in moving
parts.
Non-slip shoes are recommended for outdoor work.
Wear a hairnet or similar if you have long hair.
9. Alwaysusesafetywear.
Wear safety glasses.
Use a dust mask or dust lter when working in dusty environments.
10.Usedustextractors.
If the tool is equipped with or connected to a dust extractor/collector, make
sure that it is turned on and used correctly.
11.Donotabusethelead.
Do not jerk the lead; grip the plug itself when disconnecting the power. Make
sure that the mains lead does not come into contact with heat, oil, or sharp
edges.
12.Firmlysecuretheworkpiece.
If possible use vices or clamps to hold the workpiece in place. This is much
safer than holding the workpiece by hand.
13.Donotoverreach.
Make sure that you stand steady and balanced all times.
14.Lookafteryoutools.
Make sure that they are clean and that the edges are sharp for maximum
effect and best results. Follow the manuals recommendations regarding
lubrication and replacement of accessories. Inspect the mains lead regularly.
If it is damaged it should be replaced by a qualied service technician. Inspect
all leads and cables regularly to check for any damage. Make sure that the
machine’s/tool’s handles and controls are clean, dry and free from oil and
grease.
15.Turnthepoweroff.
Pull out the plug and push in the emergency stop button before servicing or
changing any blades, drill bits, cutters or sanding discs.
16.Removeallspannersandrepairtools.
Make a habit of checking to make sure that the machine is free of all spanners
and tools before turning the power on.
17.Avoidaccidentalstarting.
Do not walk around with your nger on the trigger of a power tool if it is
plugged in. Make sure that the on/off switch is set to OFF before plugging in
any power tool.
18.Usethecorrectextensionleads.
If you use extension leads outdoors, only use those designed for outdoor use.
Only use extension leads with appropriately sized diameter core wires and roll
out the whole lead.
