Clear-Com RS-601 Manual de usuario
RS-601
BELTPACK
INSTRUCTION MANUAL
RS-601 Instruction Manual
©2005 Vitec Group Communications
All Rights Reserved
Part Number 810287, Rev. B
Vitec Group Communicatons Inc.
4065 Hollis Street
Emeryville, CA 94608-3505
U.S.A
Clear-Com is a registered trademark of Vitec Group
Communications
The Clear-Com Logo is a registered trademark of Vitec
Group Communications
Windows is a registered trademarks of Microsoft Corp.
RS-601 BELTPACK 1
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
OPERATING YOUR BELTPACK . . . . . . . . . . . . . . . . . . . .5
CONNECTING YOUR BELTPACK . . . . . . . . . . . . . . . . . . . 13
CUSTOMIZING YOUR BELTPACK . . . . . . . . . . . . . . . . . . 19
V-Pack Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Onboard Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Settings You Can Customize . . . . . . . . . . . . . . . . . . . . . . 21
Mode Select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Latch Disable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Talk Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call-on-Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Electret Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Call Signal Tone (in Earphone) . . . . . . . . . . . . . . . . . . 27
Electret Microphone Hi-Lo . . . . . . . . . . . . . . . . . . . . . 28
Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Restoring the Factory Default Settings . . . . . . . . . . . . . . 30
2 RS-601 BELTPACK
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Warranty Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Non-Warranty Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
RS-601 BELTPACK 1
INTRODUCTION
Thank you for choosing this product. Clear-Com designed the 600
series of beltpacks to meet the needs of all beltpack users, from
beginners to experienced professionals. For advanced users, the 600
series provides the most advanced level of functioning available.
RS-600 SERIES BELTPACKS
All RS-600 series beltpacks offer the following features:
• Rugged, compact design
• Full compatibility with all existing Clear-Com party-line systems
• Four setup configurations that you can activate directly from the
beltpack
• Extra 2.5 mm cell-phone type headset jack
• Advanced setup options with V-Pack software
RS-601 BELTPACK
The RS-601 beltpack offers the following features:
• One intercom channel
• 3-pin female and male XLR connectors for ease of setup
• 4-pin male XLR to connect a headset
2 RS-601 BELTPACK
The RS-601 offers all the performance and durability of Clear-Com’s
world-standard beltpacks, plus TW compatibility. You can use the
RS-601 on a TW line (Audio on Channel B) without loading down
Channel A.
RS-601 BELTPACK 3
QUICK START
To start using your beltpack immediately:
1. Connect the appropriate line cables (3-pin XLR) from an
active intercom line to the beltpack.
2. Turn down the beltpack’s incoming volume with the
volume-control knob.
3. Plug in a headset equipped with a dynamic microphone to
the beltpack’s main headset jack.
The headset jack is labeled on the back of the beltpack.
4. To talk on the intercom line, press and hold the talk button.
Speak into the microphone in your headset.
Note: If you tap the talk button twice in quick succession,
the talk button locks to the “on” setting (“latches”) for
hands-free use. Press the talk button again to unlatch it.
5. Adjust the sidetone and incoming volume levels as you and
others on the intercom line speak at the anticipated levels for
the application.
6. To send a call signal, press the button labeled “call.”
RS-601 BELTPACK
4
5
R S - 6 0 1 B E L T P A C K
OPERATING YOUR BELTPACK
An RS-601 beltpack works with all previous versions of Clear-Com
party-line stations and beltpacks. It is the first single-channel
Clear-Com beltpack that is compatible with Clear-Com TW
beltpacks.
This means that you can wire several beltpacks together in a “daisy-
chain” or “home-run” configuration on a TW line that includes
RS-502/522 TW beltpacks as well as other RS-600 series TW
beltpacks. While the audio on the RS-601 will always be from pin 3 of
the XLR connector (channel B), it will still pass the channel A audio
through on Pin 2.
The RS-601 is not recommended for use with RTS-TW systems as
the frequency response curves and audio levels are different.
Clear-Com’s RS-603 series beltpacks are compatible with RTS-TW
systems.
6 RS-601 BELTPACK
CONTROLS AND ADJUSTMENTS
Figure 1: Control Panel of an RS-601 Beltpack
Talk Button
To talk on the intercom line, press and hold the beltpack’s talk button
while speaking into the microphone in your headset. While you hold
the button, your voice transmits to the intercom line. When you
5"-,
$"--
5BML#VUUPO
5BML-JHIU
7PMVNF$POUSPM
,OPC
$BMM#VUUPO
$BMM-JHIU
4FUVQ OGPSNBUJPO8JOEPX
1PXFS4UBUVT-JHIU
1
Otros manuales para RS-601
1
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Clear-Com
Clear-Com
Clear-Com TEMPEST 2400 Manual de usuario
Clear-Com
Clear-Com Eclipse HX-Median Manual de usuario
Clear-Com
Clear-Com Tempest 2400 MasterBelt Manual de usuario
Clear-Com
Clear-Com RS-201 Guía de solución de problemas
Clear-Com
Clear-Com FreeSpeak II Integra Manual de usuario
Clear-Com
Clear-Com HelixNet Partyline Manual de usuario
Clear-Com
Clear-Com CS-100 Guía de solución de problemas
Clear-Com
Clear-Com MS-222 Manual de usuario
Clear-Com
Clear-Com WBS Manual de usuario
Clear-Com
Clear-Com RM-220 Guía de solución de problemas
Clear-Com
Clear-Com PM-220 Guía de solución de problemas
Clear-Com
Clear-Com Tempest 2400 MasterBelt Manual de usuario
Clear-Com
Clear-Com KB-702 Manual de usuario
Clear-Com
Clear-Com EclipseHX Manual de instalación y operación
Clear-Com
Clear-Com TEMPEST 2400 Manual de usuario
Clear-Com
Clear-Com HMS-4X Guía de inicio rápido
Clear-Com
Clear-Com BP410 Manual de usuario
Clear-Com
Clear-Com TEMPEST 2400 Manual de usuario
Clear-Com
Clear-Com Eclipse Median Manual de usuario
Clear-Com
Clear-Com HelixNet Cómo utilizar
