Cisco RV Series Manual de usuario

Tabla de contenidos

Otros manuales de Enrutador de red de Cisco

Cisco

Cisco 32369 Manual de usuario

Cisco

Cisco RV120W Manual de usuario

Cisco

Cisco WRT54G Manual de usuario

Cisco

Cisco Cisco 888 Manual

Cisco

Cisco Linksys WET610N Manual de usuario

Cisco

Cisco Network Router Manual de usuario

Cisco

Cisco 805 Series Manual de usuario

Cisco

Cisco Firepower 1120 Manual

Cisco

Cisco SCE8000 GBE Manual de usuario

Cisco

Cisco ASR 1000 Series Manual

Cisco

Cisco ASR1004 - ASR 1004 Modular Expansion Base Manual de usuario

Cisco

Cisco ASR-920-12SZ-IM Manual de usuario

Cisco

Cisco 700 series Manual de usuario

Cisco

Cisco SRP500 Manual de usuario

Cisco

Cisco ASR-920-24SZ-IM Manual de usuario

Cisco

Cisco ASR 9912 Manual de usuario

Cisco

Cisco 7600 Series Instrucciones de montaje

Cisco

Cisco A9K-SIP-700 Manual

Cisco

Cisco ONS 15454 Series Manual de usuario

Cisco

Cisco ASR 1001-X Manual de usuario

Cisco

Cisco RV016 - Small Business - 10/100 VPN Router Manual de usuario

Cisco

Cisco NCS 5000 Series Manual de usuario

Cisco

Cisco Router Cisco 7206 VXR Manual de usuario

Cisco

Cisco CRS-1 - Carrier Routing System Router Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

EnGenius

EnGenius ESR-9710 Manual de usuario

LevelOne

LevelOne FBR-1416 Manual de usuario

Dynacord

Dynacord Promatrix 6000 Manual de usuario

Lorex

Lorex F5D8230-4 Manual de usuario

●

●

●

●

Configure Internet Protocol (IP) Mode on an

RV Series Router

Objective

The Internet Protocol (IP) Mode tells your router what IP version your local network is using

in comparison to what version the Wide Area Network (WAN) uses. It is important to

configure this option correctly as certain features may or may not be available on your router

depending on what the state of your network is.

This article aims to show you how to configure the IP Mode on an RV Series Router.

Applicable Devices

RV Series

Software Version

1.0.3.16 — RV130, RV130W

1.0.0.17 — RV132W

1.0.0.21 — RV134W

Configure IP Mode

Step 1. Log in to the web-based utility and choose Networking > IP Mode.

Note: The images on this article are taken from the RV130W router. Menu options may vary

per model.

Step 2. In the IP Mode field, choose an option from the drop-down list.

●

●

●

●

●

●

●

●

If you are using RV130 or RV130W, the options are:

LAN:IPv4, WAN:IPv4 — Both the LAN and the WAN use IPv4.

LAN:IPv6, WAN:IPv4 — Use this if the LAN only uses IPv6 but the WAN uses IPv4. If you

choose this option, you may proceed to the Static 6to4 DNS section.

LAN:IPv6, WAN:IPv6 — Both the LAN and the WAN use only IPv6.

LAN:IPv4+IPv6, WAN:IPv4 — The LAN uses both IPv4 and IPv6, but the WAN only uses

IPv4. If you choose this option, you may proceed to the Static 6to4 DNS section.

LAN:IPv4+IPv6, WAN:IPv4+IPv6 — Both the LAN and the WAN use IPv4 and IPv6.

LAN:IPv4, WAN:IPv6 — The LAN uses IPv4, but the WAN uses IPv6.

If you are using the RV132W or RV134W router, the options are:

LAN:IPv4, WAN:IPv4 — Both the LAN and the WAN use IPv4.

LAN:IPv4+IPv6, WAN:IPv4+IPv6 — Both the LAN and the WAN use IPv4 and IPv6.

Step 3. Click Save.

Step 4. Click OK on the notification telling you that you will now be redirected to the new

default IP address of the router. If the page is not redirected automatically in 2-3 minutes,

enter the new IPv4 or IPv6 address to log in to the router.

Static 6to4 DNS (RV130 and RV130W only)

If you chose LAN:IPv6, WAN:IPv4 or LAN:IPv4+IPv6, WAN:IPv4 from the IP Mode drop-

down list, the Show Static 6to4 DNS Entry will become enabled. It allows IPv6 packets to be

transmitted over an IPv4 network. The 6to4 tunneling is typically used when a site or end

user wants to connect to the IPv6 Internet using the existing IPv4 network. Configuring this

feature is optional and available only on RV130 and RV130W.

Step 1. Click the Show Static 6to4 DNS Entry button to display the Domain to IP address

table. This table is used to map domais to IP addresses, so that a user is redirected to a

corresponding IP address when using the domain.

Step 2. In the Domain 01 field, enter a domain that you want to redirect to an IP address.

You can use up to five domains.

Note: In this example, the domain used is cisco.com.

Step 3. For each domain, enter the IP address on the corresponding IP field.

Note: In this example, the IP address is 10.10.242.242.

Step 4. Click Save.

Step 5. Click OK on the notification telling you that you will now be redirected to the new

default IP address of the router. If the page is not redirected automatically in 2-3 minutes,

please enter the new IPv4 or IPv6 address to log in to the router.

You should now have successfully configured the IP mode on your RV Series Router.