Cisco TelePresence SpeakerTrack 60 Manual de usuario

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

APRIL 2016

SpeakerTrack 60

Precision 60

Camera guide

for Cisco TelePresence Precision 60 and Cisco TelePrescence SpeakerTrack 60

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Table of Contents

Introduction ......................................................................3

About this guide..................................................................4

User documentation .......................................................4

Software .........................................................................4

Physical interface .............................................................5

Precision 60........................................................................6

SpeakerTrack 60.................................................................7

Connecting to a codec .....................................................8

Codec compatibility............................................................9

Connect Precision 60 to SX80 Codec .............................10

Connect SpeakerTrack 60 to SX80 Codec ...................... 11

Connect SpeakerTrack 60 to Codec C40 ........................12

Connect SpeakerTrack 60 to Codec C60 ........................13

Connect SpeakerTrack 60 to Codec C90 ........................14

Factory reset ..................................................................15

Precision 60......................................................................16

SpeakerTrack 60............................................................... 17

Reset the device........................................................... 17

Reset the cameras........................................................18

Appendix ........................................................................19

Technical specifications................................................... 20

Precision 60 ................................................................ 20

SpeakerTrack 60 ...........................................................21

Thank you for choosing Cisco!

Your Cisco product has been designed to give you many

years of safe, reliable operation.

This guide is supposed to make you comfortable with the

Precision 60 and SpeakerTrack 60 cameras.

We recommend to visit the Cisco web site regularly for

updated versions of the user documentation.

The user documentation can be found on:

http://www.cisco.com/go/telepresence/docs

How to use this guide

The top menu bar and the entries in the Table of contents

are all hyperlinks. You can click on them to go to the topic.

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Contents

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

CHAPTER 1

Introduction

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Introduction

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

About this guide

This user guide describes the information needed to install and

use the Cisco TelePresence Precision 60 and Cisco TelePresence

SpeakerTrack 60 cameras.

User documentation

The user documentation for the Cisco TelePresence systems,

running the TC software, have several guides aimed at various

user groups.

• Video conference room primer

• Video conference room acoustics guidelines

• Getting started guide for the TelePresence systems

• User guide for the TelePresence systems

• Administrator guides for the TelePresence systems

• API reference guides for the C Series and Codec SX80

• TC Console user guide for the C Series and Codec SX80

•

Physical interfaces guides for the C Series and Codec SX80

• Regulatory compliance and safety information guides

•

Legal and licensing information for products using TC software

Download the user documentation

Go to:http://www.cisco.com/go/telepresence/docs and select

your product to see the user documentation for your product.

Software

The camera software is automatically upgraded through the codec.

Minimum software version requirement is TC 7.1.

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Introduction

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

CHAPTER 2

Physical interface

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Physical interface

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Precision 60

Video

•

HDMI is the main video source. The maximum resolution

is 1080p60.

•

3G-SDI is the secondary video source. The maximum reso-

lution is 1080p60.

•

In multiple camera scenarios, the HDMI output should be used.

•

For long cable lengths, HDMI extenders supporting EDID

should be used. The extender must not alter the SPA address

or any EDID information incorrectly.

Power

• Connect power (12 VDC, 2.5 A).

• Always use the provided cables and adapter.

Ethernet

For camera control and software upgrades.

Do NOT connect a camera control cable to the Ethernet

codec port of the device. This will destroy the system.

Kensington lock

The Kensington lock may be used to prevent the camera from

being moved from its place or to prevent theft. The LED is lit during a call.

The LED is continuously lit when power is

On, and flickers when receiving signals

from the remote control.

Power

supply

Ethernet

RJ45

HDMI Video

out

3G-SDI out

Display port*

Kensington lock

* For future use

Pin-hole for

factory reset

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Physical interface

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

SpeakerTrack 60

Video

• Two HDMI cables from the cameras.

Power

• Power out to cameras (internal connection).

• Power in: 12 VDC, 6.5 A

Always use the provided cables and adapter.

Ethernet

Two Ethernet ports are used for the internal camera control con-

nection. The third connector is used for connecting the codec.

Do NOT connect a camera control cable to the Ethernet

codec port of the device. This will destroy the system.

Microphone connectors

The right set is used for internal connection to the microphone

panel. The left set of connectors is intended for future use.

Kensington lock

The Kensington lock may be used to prevent the camera from

being moved from its place or to prevent theft.

For more information about the internal connection

setup, please see the SpeakerTrack 60 installation guide:

http://www.cisco.com/go/telepresence/docs

The camera LED is lit during a call on the

camera that is currently sending the live

picture.

The status LED is continuously lit when

power is On, and flickers when receiving

signals from the remote control.

Power out to

cameras

Ethernet

RJ45

codec

Ethernet

RJ45

camera control

Additional

connectors*

Power in USB*

Microphones

on panel

Chinch

connectors*

* For future use

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Physical interface

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

CHAPTER 3

Connecting to a codec

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Connecting the camera

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Codec compatibility

Precision 60

The Precision 60 camera is compatible with the Cisco

TelePrescence SX80 codec.

SpeakerTrack 60

The SpeakerTrack 60 system is compatible with the following

codecs:

• Cisco TelePrescence SX80 codec

• Cisco TelePrescence C90 codec

• Cisco TelePrescence C60 codec

• Cisco TelePrescence C40 codec

The codec has to run TC 7.1 software or a later version.

Cisco TelePrescence SX80

Codec C40/C60

Codec C90

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Connecting the camera

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Connect Precision 60 to SX80 Codec

•

Connect the video cable to one of the codec’s camera inputs

(HDMI). We recommend using the 1st camera input for the

main camera.

• Connect Ethernet to the codec’s 2nd or 3rd Ethernet port.

• Connect to power.

Power

(100-240 VAC, 50/60 Hz)

Power

adapter

Always use the provided power cable

and adapter (12 V

, minimum 3 A).

RJ45

HDMI

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Connecting the camera

Otros manuales para TelePresence SpeakerTrack 60

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de conferencias de Cisco

Cisco

Cisco Webex Room Kit Mini Manual de usuario

Cisco

Cisco Webex Room 70 Dual Manual de usuario

Cisco

Cisco TelePresence SX20 Manual de usuario

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Manual de usuario

Cisco

Cisco MCU24 Manual de instalación y operación

Cisco

Cisco TelePresence System Codec C60 Manual de servicio

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Manual de instrucciones

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco TelePresence SX20 Manual de usuario

Cisco

Cisco TelePresence Profile Series Manual de usuario

Cisco

Cisco TelePresence IX5000 Manual de usuario

Cisco

Cisco Telepresence MX200 Manual de servicio

Cisco

Cisco TelePresence SX10 Manual de servicio

Cisco

Cisco TelePresence DX70 Instrucciones de uso

Cisco

Cisco Telepresence MX200 Manual de servicio

Cisco

Cisco 8865 Manual de usuario

Cisco

Cisco TelePresence DX70 Manual de servicio

Cisco

Cisco CTS 1000 - TelePresence System 1000 Video... Manual de instrucciones

Cisco

Cisco TelePresence System 1100 Manual de usuario

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco TelePresence DX70 Manual de usuario

Cisco

Cisco Cius Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario