Cisco 8865 Manual de usuario

1. IP PHONE 8865:

Buttons and Hardware:

IP Phone 8865, have a built-in camera.

The following figure shows the IP Phone 8865.

Figure 1 IP Phone 8865 Buttons and Hardware:

The following table describes the IP Phone 8865 Series Buttons.

Table 1 IP Phone 8865 Series Buttons:

Handset and Handset light strip

Indicates whether you have an incoming call (flashing red) or a

new voice message (steady red).

Camera

IP Phone 8865

Use the camera for video calls.

Programmable feature buttons

and line buttons

Access your phone lines, features, and call sessions.

When adding features to the phone line keys, you are limited by

the number of line keys available. You cannot add more features

than the number of line keys on your phone.

For more information, see the Softkey, Line, and FeatureButtons

section in the "IP Phone Hardware" chapter.

Softkey buttons

Access to functions and services.

For more information, see the Softkey, Line, and Feature Buttons

section in the " IP Phone Hardware" chapter.

Back, Navigation cluster,

and Release

Back Return to the previous screen or menu.

Navigation cluster Navigation ring and Select button—Scroll

through menus, highlight items and select the highlighted item.

Release End a connected call or session.

Hold/Resume, Conference,

and Transfer

Hold/Resume Place an active call on hold and resumethe

held call.

Conference Create a conference call.

Transfer Transfer a call.

Speakerphone, Mute,

and Headset

Speakerphone Toggle the speakerphone on or off. Whenthe

speakerphone is on, the button is lit.

Mute Toggle the microphone on or off. When the

microphone is muted, the button is lit.

Headset Toggle the headset on. When the headset is on, the

button is lit. To leave headset mode, you pick up the handset or

select Speakerphone .

Contacts, Applications,

and Messages

Contacts Access personal and corporate directories.

Applications Access recent calls, user preferences, phone

settings, and phone model information.

Messages Autodial your voice messaging system.

Volume button

Adjust the handset, headset, and speakerphone

volume (off hook) and the ringer volume (on hook).

Navigation:

Use the outer ring of the Navigation cluster to scroll through menus and to move between fields. Use

the inner Select button of the Navigation cluster to select menu items.

Figure 1.1 Navigation Cluster

Phone Screen Features:

The phone screen shows information about your phone such as directory number, active call and line

status, softkeys, speed dials, placed calls, and phone menu listings. The screen is made up of three

sections: the header row, the middle section, and the footer row.

Figure 1.2 IP Phone 8865 Screen:

Table 1.1 IP Phone Screen Information

At the top of the screen is the header row. The header row displays the phone number, current date

and time, as well a number of icons. The icons display when features are active.

The middle of the phone screen displays the information associated with the line and feature buttons

on the phone.

The bottom row of the screen contains the softkey labels. Each label indicates the action for the

softkey button below the screen.

Audio Path Selection:

When you make or receive a call, the audio path goes to the last device used by you, either the

handset, the headset, or the speakerphone. The following list describes each scenario:

•Pick up the handset when you make or answer a call, and all of your calls are routed to your

handset until you select Headset or Speakerphone .

•Select Headset when you make or answer a call, and all of your calls are routed toyour

headset until you pick up the handset or select Speakerphone .

If your administrator sets your headset as the audio path on your phone, then you can remove

the handset and use your headset. This is ideal for anyone who prefers the convenience of a

headset. But you must still select Headset the first time you handle a call.

•Select Speakerphone when you make or answer a call, and all of your calls are routedto

your speakerphone until you pick up the handset or select Headset .

Make a Call:

Use your phone just like any other phone to make a call.

Procedure

Enter a number and pick up the handset.

Make a Call with the Speakerphone:

Use your speakerphone for hands-free calling. Keep in mind that your coworkers might be able

to hear your call too.

Procedure

Step 1

Enter a number using the keypad.

Step 2

Press Speakerphone .

Make a Call with a Standard Headset:

Use your headset for hands-free calling that won't disturb your coworker and gives you some

privacy.

Procedure

Step 1

Plug in a headset.

Step 2

Enter a number using the keypad.

Step 3

Press Headset .

Answer a Call:

Procedure

When your phone rings, press the flashing line button to answer the call.

Answer Call Waiting:

When you are on an active call, you know that a call is waiting when you hear a single beep and

see the line button flash.

Procedure

Step 1

Press the line button.

Step 2

(Optional) If you have more than one call waiting, select an incoming call.

Mute Your Call:

While you are on a call, you can mute the audio, so that you can hear the other person, but

they cannot hear you.

If you have a video phone, when you mute your audio, your camera continues to transmit

video.

Procedure

Step 1

Press Mute .

Step 2

Press Mute again to turn mute off.

Put a Call on Hold:

You can put an active call on hold and then resume the call when you're ready. When you place

a video call on hold, video transmission is blocked until you resume the call.

Procedure

Step 1

Press Hold .

Step 2

To resume a call from hold, press Hold again.

Forward Calls:

You can forward calls from any line on your phone to another number. Call forward is phone-

line specific. If a call reaches you on a line where call forwarding is not enabled, the call rings as

usual.

There are two ways of forwarding your calls:

•Forward all calls

•Forward calls in special situations, such as when the phone is busy or there is no answer.

When a line is forwarded, you see the Forward all icon with the line.

Procedure

Step 1

When the line to be forwarded is inactive, press Fwd All.

Step 2

Enter the call forward target number exactly as you would dial it from your phone, or select an

entry from your list of recent calls.

Transfer a Call to Another Person:

When you transfer a call, you can stay on the original call until the other person answers. This

way, you can talk privately with the other person before you remove yourself from the call. If

you don't want to talk, transfer the call before the other person answers.

You can also swap between both callers to consult with them individually before you remove

yourself from the call.

Procedure

Step 1

From a call that is not on hold, press Transfer .

Step 2

Enter the other person's phone number.

Step 3

(Optional) Wait until you hear the line ring or until the other person answers the call.

Step 4

Press Transfer again.

Adjust the Volume During a Call:

If the sound in your handset, headset, or speakerphone is too loud or too soft, you can change

the volume while you are listening to the other person. When you change the volume during a

call, the change only affects the speaker you're using at the time. For example, if you adjust the

volume while you're using a headset, the handset volume doesn't change.

Procedure

Press Volume right or left to adjust the volume while you are on a call.

Adjust the Phone Ringer Volume:

If your phone ringer is too loud or too soft when you get an incoming call, you can change the

ringer volume. Changes to the ringer volume do not affect the call volume you hear when you

are on a call.

Procedure

Press Volume right or left to adjust the ringer volume when the phone rings.

2. IP PHONE 7841 and 7821

Buttons and Hardware:

The IP Phone 7800 Series has distinct hardware types:

•IP Phone 7821 Two buttons on the left side of the screen

•IP Phone 7841 Two buttons on either side of the screen

Figure 2

. IP Phone 7800 Series Buttons and Features

The following table describes the IP Phone 7800 Series buttons and hardware.

Handset and Handset light strip

Indicates whether you have an incoming call (flashing red) or a

new voice message (steady red).

Programmable feature buttons

and line buttons

Access your phone lines, features, and call sessions.

For more information, see Softkey, Line, and Feature Buttons.

The IP Phone 7811 does not have programmable feature buttons

or line buttons.

Softkey buttons

Access functions and services.

For more information, see Softkey, Line, and Feature Buttons.

Navigation cluster

Navigation ring and Select button. Scroll through menus,

highlight items, and select the highlighted item.

Hold/Resume, Conference,

and Transfer

Hold/Resume Place an active call on hold and resume the

held call.

Conference Create a conference call.

Transfer Transfer a call.

Speakerphone, Mute,

and Headset

Speakerphone Toggle the speakerphone on or off. When the

speakerphone is on, the button is lit.

Mute Toggle the microphone on or off. Whenthe

microphone is muted, the button is lit.

Headset Toggle the headset on. When the headset is on, the

button is lit. To leave headset mode, you pick up the handset or

selectSpeakerphone .

The IP Phone 7811 does not have a Headsetbutton.

Contacts, Applications,

and Messages

Contacts Access personal and corporate directories.

Applications Access call history, user preferences, phone

settings, and phone model information.

Messages Autodial your voice messagingsystem.

Volume button

Adjust the handset, headset, and speakerphone volume (off hook)

and the ringer volume(on hook).

Table 2. IP Phone 7800 Series Buttons and Features

Otros manuales para 8865

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de conferencias de Cisco

Cisco

Cisco TelePresence MX300 Manual de servicio

Cisco

Cisco 7937G - Unified IP Conference Station VoIP... Manual de usuario

Cisco

Cisco Telepresence MX800 Manual de usuario

Cisco

Cisco TelePresence System Codec C90 Manual de usuario

Cisco

Cisco TelePresence Profile Series Manual de usuario

Cisco

Cisco TelePresence IX5000 Guía de configuración

Cisco

Cisco TelePresence SX20 Manual de usuario

Cisco

Cisco Aironet 1000 Series Manual de instalación y operación

Cisco

Cisco TelePresence ISDN Link Manual de servicio

Cisco

Cisco TelePresence DX70 Manual de usuario

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco Spark Room 70 Single Manual de usuario

Cisco

Cisco Webex Codec Pro Manual de usuario

Cisco

Cisco Service Manual Manual de usuario

Cisco

Cisco Webex Room Kit Manual de usuario

Cisco

Cisco 7937G - Unified IP Conference Station VoIP... Manual de usuario

Cisco

Cisco Profile Series Manual de usuario

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco TelePresence SX20N Manual de usuario

Cisco

Cisco TelePresence SX20 Manual de servicio

Cisco

Cisco TelePresence SpeakerTrack 60 Manual de usuario

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco TelePresence DX80 Manual de usuario

Cisco

Cisco Quick Set C20 Manual de servicio

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario