Cisco MX200 G2 Manual de usuario

Installing Cisco TelePresence MX200 G2 - Table Stand

This installation guide covers MX200 G2 with a table stand.

Dimensions

Height: 775mm / 30.5in.

Width: 995 mm / 39.2in.

Depth: 260mm / 10.2 in.

Weight total: 30 kg / 66 lb

Weight monitor: 24 kg / 53 lb

Manpower

Two people working together are required to mount the

monitor to the table stand.

Room setup

Explore the Cisco Project Workplace website to find

inspiration and guidelines when preparing your office

or meeting room for video conferencing,

http://www.cisco.com/go/projectworkplace

Documentation

Cisco Spark: Visit the Cisco Spark help site to find

more information about Spark registered room

systems, http://help.ciscospark.com

Other services: Visit the Cisco web site to find user

guides and compliance and safety information for

the video system, http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX200 G2 - Table Stand

• Table stand with swivel

• Back cover

• Screwdriver

Monitor

Accessories:

• Microphone(s)

• Cables

• Screws for mounting

the monitor

• Gloves

Touch controller

Installing Cisco TelePresence MX200 G2 - Table Stand

Remove the cable

channel lid for now.

You need it in step 3.

The monitor may be tilting slightly

forward. If you gently pull it to a vertical

position, the screws enter more easily.

Front

Use gloves when

handling the monitor. 4 × M6x16

1Mount the monitor on the table stand

Installing Cisco TelePresence MX200 G2 - Table Stand

2Connect the cables

For maintenance only

Reset to factory settings

Audio line output

Always use the provided

power cable.

The wall socket outlet must

be easily accessible after

installation.

Power switch

Audio line input

LAN1

Video input2

(e.g. PC)

Video output2

(e.g. 2nd display)

Power

(100-240 VAC,

50/60 Hz)

Touch

controller1

USB, for future use

HDMI

DVI-I

Microphone3

2nd microphone2, 3

1Use the cable that is labeled with for

the Touch controller; use the cable that

is labeled with for the LAN

2Optional

3Always use the provided Cisco

TelePresence Table Microphone 20

Installing Cisco TelePresence MX200 G2 - Table Stand

4Start up the system

• Connect to power and LAN/Ethernet.

• Switch on the system. The power switch is next

to the power connector at the rear side of the

system.

Wait while the unit starts up. Normally this takes a few minutes.

It may include automatic software upgrade and restart of the

Touch controller.

• Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to get started

with Spark registered systems, visit http://help.ciscospark.com

and look for Getting Started articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site, http://www.cisco.com/go/mx-docs

Never move the camera manually when power is switched on;

always use the camera control function on the Touch controller

to change the camera position.

3Lead out the cables

Snap on the cable

channel lid for strain relief.

Lead the cables downward and out at the back.

Installing Cisco TelePresence MX200 G2 - Table Stand

EMC Class A declaration

WARNING: This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be

required to take adequate measures.

声明

此为

A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

5Mount the back cover

Lift this handle to

lock/unlock the back

cover. Use both

hands if required.

Cisco has more than 200 offices worldwide.

Find an overview of the offices on the Cisco web site at

http://www.cisco.com/go/offices

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or

its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to

this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the

property of their respective owners. The use of the word partner does not imply a

partnership relationship between Cisco and any other company. (1110R)

Otros manuales para MX200 G2

Tabla de contenidos

Otros manuales de Sistema de conferencias de Cisco

Cisco

Cisco TelePresenceSX10 Manual de usuario

Cisco

Cisco Telepresence MX200 Manual de usuario

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco Telepresence MX800 Manual de lista de piezas

Cisco

Cisco Webex Share Manual de usuario

Cisco

Cisco TelePresence IX5200 Manual de usuario

Cisco

Cisco TelePresence MX700 Manual de usuario

Cisco

Cisco TANDBERG Quick Set C20 Manual de instrucciones

Cisco

Cisco TelePresence MX700 Manual de servicio

Cisco

Cisco Webex Room 70 Panorama Manual de usuario

Cisco

Cisco TelePresence System Codec C90 Manual de servicio

Cisco

Cisco TelePresence System 3200 Manual de usuario

Cisco

Cisco TelePresence System TX9000 Guía de configuración rápida

Cisco

Cisco TelePresence System Codec C60 Manual de instrucciones

Cisco

Cisco TelePresence SX20 Manual de servicio

Cisco

Cisco TelePresence SX20 Manual de usuario

Cisco

Cisco TelePresence DX70 Manual de usuario

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco SX80 Manual de usuario

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco Webex Room 70D Manual de usuario

Cisco

Cisco TelePresence MX300 Manual de usuario

Cisco

Cisco TelePresence IX5000 Guía de configuración

Cisco

Cisco MX200 G2 Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario