Chamberlain SECURITY+ WPB3LM3 Manual de usuario

Carton Inventory

Overview

The Wireless 3-Button Control Station is designed to

be used only with the Wireless 3-Button Radio

Receiver (not provided).

Control Station

Model WPB3LM3

Wireless 3-Button Control Station

Bolt (4)

Washer (4)

Nut (4)

Screw (4)

Allen Wrench

Assembly

Install 4 AA Alkaline batteries (not provided). (Lithium

batteries recommended for colder environments.)

Learn

Button

Dipswitch

Block

Your WPB3LM3 can also be programmed to operate

as a 3-button wireless control station: The green

button will open the door, the white button will close

the door and the red button will stop the door's

movement. This feature may be setup as follows:

1. To enter programming press the RADIO button on

the logic board (the RADIO LED will light).

2. To program the OPEN button to the WPB3LM3

press OPEN on the logic board. The RADIO LED

will flash and then stay on. Press the green button

on the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

3. To program the CLOSE button to the WPB3LM3

press CLOSE on the logic board. The RADIO LED

will flash and then stay on. Press the white button

on the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

4. To program the STOP button to the WPB3LM3

press STOP on the logic board. The RADIO LED

will flash and then stay on. Press the red button on

the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

5. After programming the WPB3LM3 press the

RADIO button on the logic board (LED will turn off).

NOTE: If there is no activity within 30 seconds the

radio will automatically exit programming mode.

Programming WPB3LM3 to a

Commercial Logic 3 Operator

Operation

Clear Memory of Receiver: When the Receiver has

power, press the Learn button until the LED blinks a

total of 6 times.

Mount Control Station

Step 1

Choose mounting location for Control Station. Remove

the back panel and attach it to a solid surface or post.

Mount the Control Station onto the back panel with

screws. Tighten screws with Allen wrench.

Step 2

It is recommended that the Control Station be

mounted to a Gooseneck post or non-metallic

surface.

Refer to Receiver manual for mounting instructions.

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited,

except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

1-800-528-2806

www.liftmaster.com

The Chamberlain Group, Inc. warrants to the first retail purchaser of this product that it is free from defect in materials and/or workmanship for a period

of 1 year from the date of purchase.

One Year Limited Warranty

Otros manuales de Controladores de Chamberlain

Chamberlain

Chamberlain LiftMaster Professional CB224 Manual de usuario

Chamberlain

Chamberlain 041DJ002 Manual de usuario

Chamberlain

Chamberlain CAP2D Manual de usuario

Chamberlain

Chamberlain CLLACD Manual de usuario

Chamberlain

Chamberlain SMART GARAGE CONTROL Manual de usuario

Chamberlain

Chamberlain Security+ CLLA1 Manual de usuario

Chamberlain

Chamberlain CB124EV Manual de usuario

Chamberlain

Chamberlain LA412UL Guía de inicio rápido

Chamberlain

Chamberlain AGO250L Manual de usuario

Chamberlain

Chamberlain 320LM Manual de usuario

Chamberlain

Chamberlain CAP2D Manual de usuario

Chamberlain

Chamberlain Motorlift GWUP180 Manual de usuario

Chamberlain

Chamberlain CAP2D Manual de usuario

Chamberlain

Chamberlain LA500UL Guía de inicio rápido

Chamberlain

Chamberlain Liftmaster PROFESSIONAL 412-315HM Manual de usuario

Chamberlain

Chamberlain Garos CS 300 Manual de usuario

Chamberlain

Chamberlain T Manual de usuario

Chamberlain

Chamberlain 41A6127 Manual de usuario

Chamberlain

Chamberlain RED/GREEN LIGHT CONTROL KIT Manual de usuario

Chamberlain

Chamberlain 395LM Manual de usuario

Chamberlain

Chamberlain 811LM Manual de usuario

Chamberlain

Chamberlain Motorlift GWAP120 Manual de usuario

Chamberlain

Chamberlain LiftMaster Professional 915LM Manual de usuario

Chamberlain

Chamberlain CLDM1ANZ Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario