CEL Robox Manual de usuario
www.cel-robox.com
Version 1.0
Quick Start Guide
including AutoMaker™
22
www.cel-robox.com
Welcome
Package Contents
Check your product package for the following items.
• If any of the above items are damaged or missing, contact your retailer.
• The illustrated items above are for reference only. Actual product
specifications may vary with dierent models.
Set of 4 Cleanup ToolsUSB Flash Drive Tweezers 10x Bed Wipes
Axis Lubricant SmartReel™
2m USB A-B Cable
IEC C5 Power Cable
Safety Guide Warranty Card
Robox®
BED CLEANING WIPE
70% Isopropyl Alcohol
NOT FOR MEDICAL USE
0197
BED CLEANING WIPE
70% Isopropyl Alcohol
NOT FOR MEDICAL USE
0197
BED CLEANING WIPE
70% Isopropyl Alcohol
NOT FOR MEDICAL USE
0197
www.cel-robox.com
Safety
Information
Version1.0
33
www.cel-robox.com
Welcome
Unpacking Robox®
This section explains how to safely unpack your new Robox® and get it ready
for production! Your new micro manufacturing platform has been carefully
assembled and packaged at our factory to arrive with you in perfect condition.
Please follow the instructions below carefully to avoid causing any damage.
1. Carefully cut the tape along the top of the box, being careful not to cut too
deep, and open the box.
2. Remove the accessories box from the side by pulling on the plastic handle.
3. Li Robox® from the box using the two handles in the packing trays on either
side.
44
www.cel-robox.com
Welcome
4. Remove the packing tape which is used to secure the door.
5. Remove the packing tape and warranty card which are secured to the bed
and the blue plastic packing clip used to secure the printhead.
6. Ensure that the head and bed are free to move before proceeding. You can
move them both by hand to check.
• We recommend that you keep hold of all of your packaging materials,
should you need to return any parts to us.
55
www.cel-robox.com
Hardware Overview
At A Glance
This section highlights all the major features of Robox®.
1
2
8
3
6
7
12
13
4
10
11 9
5
14
1Print Head 8X Axis Belt
2X Carriage 9Tip Wipe Blade
3X Axis Rails 10 Reel Hub Cover
4Print Bed 11 Door Interlock Latch
5Y Axis Rail 12 Enclosure Door
6Z Axis Rail and Drive Screw 13 Internal Ambient Lighting
7Z Carriage (Right) 14 Front Tray Cover
66
www.cel-robox.com
Hardware Overview
This view shows the rear connections of Robox® and the SmartReel™ location.
1
2
8
3
6
7
4
9
5
1microSD Card Flash Storage 6Pause/Resume/Eject Button
2USB Type B Socket 7Outlet Vents
3Power Switch 8Door
4C5 ‘Cloverleaf’ Power Inlet 9Side Cover
5Robox® SmartReel™
• Although there is a microSD card accessible from the back of Robox®, this
cannot be read by any other machine and is only for use as internal flash
storage - access is provided only for diagnostic/repair purposes.
• Do NOT connect the USB cable until you have completed the soware
installation on the following page.
77
www.cel-robox.com
Installing AutoMaker™
Soware Installation
This section explains in detail how to install the AutoMaker™ soware package for
controlling your Robox®. The included USB card drive contains this soware and
an electronic version of this document, as well as some sample .stl files for you to
print.
These steps may vary slightly depending on your operating system, all provided
screenshots and instructions are from Windows 8 for reference.
1. Plug your included USB drive into an
available USB port (drive letter may vary)
- choose Open folder to view files:
If this is not displayed, you can access the
drive through My Computer.
2. The contents of the drive will be
displayed in File Explorer as shown
(view mode may vary).
3. Navigate to \AutoMaker Soware\
Windows and run the installer
by double-clicking on the icon -
AutoMaker-windows-installer.exe
4. Select the installation language from the
dropdown menu, and then click OK to
continue.
88
www.cel-robox.com
Installing AutoMaker™
5. The installer will start, click Next > to
continue.
6. Please carefully read the Licence
Agreement and select ‘I accept the
agreement’, then select Next > to
continue.
7. Please choose where you would like
to install AutoMaker™, either by typing
the path directly, or by clicking the
button. Click Next > to continue
and accept the path and begin the
installation. N.B. To facilitate future
support we recommend using the
default install location.
8. Choose whether you would like to
add Shortcuts to the Start Menu or
Desktop. Then click Next > and wait as
AutoMaker™ is installed to your hard
drive.
9. Installation is complete. Tick the
checkbox if you would like to read the
‘Readme’ file aer clicking Finish.
99
www.cel-robox.com
Account and Hardware Setup
Setting Up Your Robox® Account
When you start AutoMaker™ for the first time, the product and customer
registration screen will be displayed, allowing you to register for product updates,
support and warranty repairs. Please complete all sections before continuing.
Attaching the USB Cable
Robox® comes supplied with a 2 metre USB Type A-Type B cable for connecting
to your PC. Please connect as shown.
• DO NOT connect your Robox® until you have been through the soware
installation steps on the previous page and started AutoMaker™.
1010
www.cel-robox.com
Hardware Setup
Attaching the Power Cable and Powering On
Connect the supplied AC power lead to Robox® and switch on using the rear
power switch.
1
2
This will install the necessary drivers for connecting your Robox® and could take
a few minutes. When correctly installed and switched on, it should appear in
Device Manager as a COM port called “Robox v1.0 (COM3)” (COM number may
vary). It should also appear on the Status Page of AutoMaker™, along with what
reel and head are installed - for more information please refer to the user manual.
Loading Filament
This section explains how to load your chosen 3D printing plastic filament
into Robox® ready to produce your first print! It is designed to be a very simple
process with most functions taking place automatically.
Preparing the Filament
Before attempting to load filament, it is advisable to cut the end at a shallow
angle using a knife or sharp scissors to produce a sharp tip as shown below. This
will allow the filament to enter the extruder and melt chamber more easily.
Tabla de contenidos
Otros manuales de Impresora 3D de CEL
