CAS SW-1S Series Manual de usuario

2

3

CONTENTS

PRECAUTIONS.................................................. 4

PREFACE ............................................................... 6

NAMES AND FUNCTIONS.......................... 6

OPERATIONS...................................................... 9

1. Simple Weighing Mode ..................................... 9

2. Weighing with Tare............................................ 9

3. Changing Unit of Weight ................................ 10

4. Hold Function (SW-1S , SW-1W )................. 10

5. Comparator Function (SW-1C only).............11

6. Counting Function (SW-1C only) ................. 12

7. How to Use Print(Option)............................... 14

8. How to Set Auto Power Off ............................ 20

BATTERY MAINTENACE......................... 21

ERROR MESSAGE......................................... 21

SPECIFICATIONS .......................................... 22

4

PRECAUTIONS

5

PRECAUTIONS

6

PREFACE

Thank you for purchasing CAS SW-1S/1C / 1W Series.

These series have been designed with CAS reliability, under rigid quality control

and with outstanding performance. Your special departments can enjoy these

high quality reliable CAS products.

We believe that your needs will be satisfied and you will have proper reliability.

This manual will help you with proper operation and care of the SW-1S/1C/1W

Series. Please keep it handy for future reference.

NAMES AND FUNCTIONS

OVERALL VIEW

DISPLAY & KEYBOARD

■SW-1S, SW-1W (HOLD Version)

7

■KEY FUNCTIONS

KEYS FUNCTIONS

Used to set the zero point.

Used to input or cancel the weight of tare.

Used to make the weight of commodity stable.

This weight is average value.

Used to turn on and off the scale.

■SW-1S, SW-1W (Unit Version, Option)

■KEY FUNCTIONS

KEYS FUNCTIONS

Used to set the zero point.

Used to input or cancel the weight of tare.

Used to convert the unit of weight.

Used to turn on and off the scale.

8

■SW-1C

■KEY FUNCTIONS

KEYS FUNCTIONS

Used to set the zero point.

Used to input or cancel the weight of tare.

Used to change the unit of weight, and shown as following sequence

on the display. [Kg] J[WL on or off] J[PCS] J[Kg]

Used to turn on and off the scale.

9

OPERATIONS

■Turn on the scale by pressing key. Then, the display will show all the segments and

count up "0" to "9". You may stop this automatic counting by pressing the key.

■When you turn on the display, make sure that platter is empty. Otherwise, display will show

"Err 1", an error of initial zero range. Please refer to "ERROR MESSAGE" section for

more information on page21.

■When the weight becomes stable the display shows the stable sign ( ○) on.

■You may need to make it "0.000" by pressing key unless the display indicate "0.000"

under the empty platter.

1. Simple Weighing Mode

①Place a commodity on

the platter.

②Remove the commodity

from the platter.

2. Weighing with Tare

■TARE means the weight of container being used for a commodity.

■TARE key function is to subtract the weight of the container from full weight loaded.

Place a container on①

the platter.

②Press the key. ③Place a commodity into

the container, then the

display will show only the

weight of the commodity.

10

④Remove container and

commodity, then the display

will show the weight of the

container with "-" symbol.

⑤Press the key, then

display will show the

"0.000".

3. Changing Unit of Weight (SW-1S,SW-1W,Unit ver. only)

■Press the key in the simple weighing mode.

You may select kg, lb, or oz as the unit of weight.

4. Hold Function (SW-1S,SW-1W,Hold ver. only)

②"HOLD" will be displayed

twice

③Then average value will be

show twice And the "HOLD"

function will be removed

automatically

①When the weight is

unstable, press the key.

11

5. Comparator Function - HI / LOW Limit Setting

(SW-1C only)

①Press the key until

the display shows "WL

OFF". "WL OFF" means

that comparator function

is not activated.

②Press key to activate

this function. The display

shows "WL ON".

③Press key once to set

up the low limit. The display

shows "0.000" and the first

number flashes.

④Press the key to have

number increase. To move

flash to next digit, press

the key.

⑤Press key to set up

HIGH limit. The display shows

"0.000" and you can change

these numbers by pressing

key. If you want to move

to next digit you can go by

pressing key.

⑥If you set up HIGH limit

you can go out by pressing

key, and "WL on"

message on the display.

⑦If you set up HIGH limit and LOW limit incorrectly, "Err" will be shown on the display.

Then you may need to set it up again. For example, LOW LIMIT=2.990 kg and HIGH

LIMIT=1.990 kg this is incorrect setting because HIGH limit is lower than the LOW limit.

When HIGH and LOW limit are set as the same or above maximum capacity it still shows

"Err" message.

Otros manuales para SW-1S Series

5

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Otros manuales de Escala de CAS

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario