CAS PB-II Manual de usuario
2
3
PRECAUTIONS 4
PREFACE 6
OVERALL VIEW 6
DISPLAY & KEYBOARD 7
OPERATIONS 8
1. Simple Weighing Mode 8
2. Weighing with Tare 8
3. Hold Function 9
4. Setup Mode 10
5. How to use print(Option) 11
BATTERY MAINTENACE 19
ERROR MESSAGE 19
SPECIFICATIONS 20
4
5
6
Thank you for purchasing CAS PB(Portable Bench).
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the PB(Portable Bench).
Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
7
DISPLAY & KEYBOARD
■PB2(LCD)
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to make the weight of commodity stable.
This weight is average value.
Used to turn on/off the scale or backlight. (If you press the button long
time, Power is turned off)
8
●Turn on the display by pressing key. Then, the display will show all the
segments and count up "0" to "9".
●When you turn on the display, make sure that platter is empty. Otherwise,
display will show "Err 1", an error of initial zero range. Please refer to "ERROR
MESSAGE" section for more information on page 19
●When the weight becomes stable the display shows the stable sign ( ○) on.
●You may need to make it "0.00" by pressing key unless the display
indicate "0.00" under the empty platter.
1. Simple Weighing Mode
①Place a commodity on
the platter.
②Remove the commodity
from the platter.
2. Weighing with Tare
●TARE means the weight of container being used for a commodity.
●TARE key function is to subtract the weight of the container from full weight loaded.
Place a container on①
the platter.
②Press the key. then
display will show the "0.00".
③Place a commodity into
the container, then the
display will show only the
weight of the commodity.
9
④Remove container and
commodity, then the display
will show the weight of the
container with "-" symbol.
⑤Press the key, then
display will show the "0.00".
3. Hold Function
①When the weight is
unstable, press the key.
②"HOLD" will be displayed
twice
③Then average value will be
show twice And the "HOLD"
function will be removed
automatically
10
4.SETUP MODE
4-1. How to Go to Setup Mode
Make sure that power is OFF. While pressing the ZERO key, press the key. The display shows “U SEt”.
You can select each menu by pressing the ZERO key and change the setting by pressing the TARE key. If you
press ZERO key, you can save current setting and go next mode.
4-2. Set up Mode Table
MENU DISPLAY DESCRIPTIONS
“ Off ” Do not use back-light.
“At ” Back-light is on 5 seconds.
BL light
(Backlight
Setting) “ On ” Use back-light.
“ rS-Co”Print out, continuously. (Continue Mode)
“rS-PC ” Print out, continuously. (CAS10Byte).
“ rS-CAS ” Print out, continuously. (CAS22Byte)
“rS-St2 ” Weight is Stable, Print out. (Stable Mode)
“ rS-DLP ” Weight is Stable, Print out. (DLP Printer Mode)
“rS-K ” Push the key , Print out. (Command Mode)
( Warning – Hold key not available when rs-K).
Rs-232
(Communication
Setting)
“rS-St1 ” Weight is Stable, Print out. (After zero return)
“ n” Do not use Auto Power Off function
At – OFF
(Suspend
Setting) “ 1 ~ 30 “
Power turns to be off automatically when the scale
is not in operation over for 1-30 minutes
Save
(Save Setting) save current setting and go next mode
- Change menu, change set data.
- Enteringmenu
※
Italic Bold : Default Setting
11
5. How to Use Print (Option)
5-1. Mode Change
You can use print out function. Print Out Mode has total 7 stage.
Each Stage is “rS-Co, rS-PC, rS-CAS, rS-St2, rS-DLP, rS-K, rS-St1”
5-2. rS-Co
1)Mode Setting
- This Print Mode is ‘Continue Mode’. First of all, You must scale’s mode setting.
Please refer to the page 10.
2)Print Opreation
①Place a commodity on the
platter, then the display will
show the weight of the
commodity. The weight is
send to the printer continually.
②Remove container and
commodity, then display will
show the"0.00".
3)Print Out
rS-Co MODE
=> Continue Mode
25.80 kg
25.80 kg
25.80 kg
25.80 kg
0.00 kg
0.00 kg
0.00 kg
0.00 kg
Tabla de contenidos
Otros manuales de Escala de CAS
CAS
CAS Retail PR-T Series Manual de usuario
CAS
CAS DB-II Manual de usuario
CAS
CAS BF-1255B Manual de usuario
CAS
CAS SW-1S Series Manual de usuario
CAS
CAS ED Series Manual de usuario
CAS
CAS EC-II Series Manual de usuario
CAS
CAS RETAIL WEIGHING SOLUTION CT100 Manual de usuario
CAS
CAS PD-II Manual de usuario
CAS
CAS EB Series Manual de usuario
CAS
CAS S2000JR Manual de usuario
CAS
CAS AD series Manual de usuario
CAS
CAS BF-1410 Manual de usuario
CAS
CAS DB-1 Manual de usuario
CAS
CAS PDN Series Manual de usuario
CAS
CAS LP-1000N Series Manual de usuario
CAS
CAS TP Series Manual de usuario
CAS
CAS PD-I Instrucciones de uso
CAS
CAS CL5000 Series Manual de usuario
CAS
CAS PW-2H Manual de usuario
CAS
CAS LP-2G Manual de usuario
