Canon Mk2500 Manual de usuario

Trademarks

Microsoft, Windows, Windows 7, Windows Vista and Windows XP are registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

Abbreviations

Throughout this document the following abbreviations are used in text.

•Microsoft Windows 7 is abbreviated as “Windows 7”

•Microsoft Windows Vista is abbreviated as “Windows Vista”

•Microsoft Windows XP is abbreviated as “Windows XP”

May we request

Thank you for understanding the following points.

•Copying this guide or any part of this guide without permission is strictly forbidden.

•The specifications for this printer as well as the software provided with the printer are

subject to change without prior notice.

•We strive to ensure accuracy of information in this guide, but if you notice errors or

omissions, please contact us.

•We can accept no responsibility for loss or damages resulting from the use of this

software.

SOFTWARE LICENSE AGREEMENT

Note: Please read the following software license agreement (to be referred to as the "Agreement") carefully.

This Agreement is made between Nisca Corporation (to be referred to as "Nisca") and the user for use of

software (to be referred to as the "Software," and to include manuals, printed matter and so forth in addition

to this Agreement) provided with this Agreement by the user for the purpose of using the applicable printer

made by Nisca (to be referred to as the "Printer").

The user shall be presumed to have agreed to this Agreement either by taking an action that indicates

"Consent" to the terms of the Agreement or by using the Software. The user shall not be permitted to use

the Software in the case of not agreeing with the Agreement.

1. License

(1). Nisca shall grant the user non-exclusive license to install the Software into a single computer and use

such installed Software on such single computer at a time for the purpose of using the Printer. The

user may not use the Software on plural computers at a time or on a network.

(2). The user shall be permitted to make one reproduction of the Software as a backup for using the

Software on the basis of clause (1) above.

(3). With the exception of that stipulated in clauses (1) and (2) above, any and all of intellectual property

rights of Nisca or licensors of Nisca, whether express or implied, shall not be transferred or licensed to

the user by this Agreement.

2. Restrictions on Use

(1). The user shall not allow the Software to be used by a third party by sub-licensing, transfer, sales,

distribution, lease, loan or any other method.

(2). The user shall not be permitted to revise, modify, decompile, disassemble or perform any other form

of reverse engineering on all or any portion of the Software. The user shall also not allow such actions

to be taken by a third party.

3. Title

Title and ownership relating to the Software shall be retained by Nisca or a licensor of Nisca depending

on their contents.

4. Copyright Markings

The user shall not alter, remove or delete any copyright markings of Nisca or a licensor of Nisca

contained in the Software.

5. Disclaimer and Exemption of Warranties

(1). The Software is licensed "as is". Nisca, affiliates of Nisca (exclude Nisca, to be referred to as

"Affiliates") and their agents or vendors shall not make any warranty, whether express or implied,

including warranty of product feasibility or suitably to a specific purpose, with respect to the Software.

(2). Nisca, Affiliates and their agents or vendors shall not be liable, as recognized by applicable laws, for

any damages incurred due to the use or inability to use the Software (referring to all damages,

including, but not limited to, lost profit and other derivative or incidental damages). This shall apply

similarly even if Nisca, Affiliates and their agents or vendors were informed of the possibility of said

damages.

(3). Nisca, Affiliates and their agents or vendors shall not bear any liability regarding any and all disputes

arising between the user and a third party caused by or related to use of the Software.

6. Export

The user shall not export, either directly or indirectly, all or any portion of the Software without

obtaining the required approval from the Japanese government or related foreign governments.

7. Term of Agreement

(1). This Agreement shall come into effect at the time the user has taken an action that indicates "Consent"

to the terms of the Agreement or at the time the Software has been used, and shall remain in effect

until terminated in accordance with clause (2) or (3) below.

(2). The user shall be able to terminate this Agreement by discarding and erasing the Software and all of

its reproductions.

(3). This Agreement shall terminate immediately when the user has violated any of the terms of the

Agreement.

(4). If the Agreement has been terminated as result of clause (3) above, the user shall promptly discard or

erase the Software and all of its reproductions.

8. U.S. Government Restricted Rights Notice

The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct. 1995), consisting

of "commercial computer software" and "commercial computer software documentation," as such items

are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1

through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the Software with only

those rights set forth herein. Manufacturer is NISCA CORPORATION/430-1 Kobayashi, Fujikawa-cho,

Minamikoma-gun, Yamanashi 400-0593, Japan. The term "the Software" used in this clause refers to

and indicates the "Software" defined in this Agreement.

9. Separable Agreement

In the case it has been determined that a portion of any of the terms of this Agreement become invalid by

law, the other terms of the Agreement shall remain completely in effect.

Nisca Corporation

Contents

SOFTWARE LICENSE AGREEMENT ..............................................i

Contents .........................................................................................iii

Introduction .....................................................................................1

System Requirements ....................................................................2

1. Installing ...................................................................................3

1.1 Installing Mk2500PC and the Printer Driver .................................................3

1.2 Uninstalling the Software............................................................................11

2. Starting Mk2500PC ................................................................12

2.1 Starting .......................................................................................................12

2.2 Shutting Down ............................................................................................13

3. Screen Structure....................................................................14

3.1 Main Screen ...............................................................................................14

Data List .....................................................................................................15

Toolbar .......................................................................................................15

Style Settings /Data Display Area...............................................................15

Menu Bar ....................................................................................................16

Status Bar...................................................................................................18

4. Operating Mk2500PC.............................................................19

4.1 File Types ...................................................................................................19

4.2 Basic Operations ........................................................................................21

Creating a New Data List............................................................................21

Opening Existing Files................................................................................22

Loading Additional Data .............................................................................24

Saving Data Lists........................................................................................24

4.3 Sending Data to the Printer ........................................................................26

4.4 Creating Numbering ...................................................................................30

4.5 Format Settings ..........................................................................................32

4.6 Remote Operation ......................................................................................36

iii

Contents

Connecting the Printer and Computer ........................................................36

Starting Printing ..........................................................................................37

Saving Print Data........................................................................................40

Saving the Backup Data .............................................................................42

Select the Printer ........................................................................................46

5. How to Use the Status Monitor.............................................48

5.1 Setting up the Status Monitor .....................................................................48

5.2 Using the Status Monitor ............................................................................50

Viewing the Printer Status ..........................................................................51

Message List ..............................................................................................52

6. Appendix ................................................................................53

6.1 Index...........................................................................................................53

Introduction

This manual contains descriptions of operating instructions for the Application software

“Mk2500PC” and the printer driver for “Mk2500” printer.

Please read this manual carefully to ensure correct operation.

This manual has been written with the assumption that users have knowledge of basic Windows

operations and functions. We recommend that users familiarize themselves with the Windows

environment before using Mk2500PC. For details about Windows terminology or operations

such as ‘Open’, refer to the documentation provided with Windows.

Features of the PC Connection Kit

Following functions are available with the PC Connection Kit.

"PC Connection Kit" consists of a software CD and a USB cable.

•Data which is made on a computer can be transmitted to the Mk2500 printer. It will be

able to input data more quickly and easily.

•A number of data files can be saved in a computer.

•CSV form data can be used.

•Print by the remote operation is possible.

USB2.0

A connector – B connector

Screens Appearing in This Manual

•This manual provides descriptions using the screens displayed under Windows Vista.

Basically, the screen contents and operation methods of Windows Vista are true of

Windows XP and Windows 2000. If they are different, descriptions will be provided

separately for individual operating systems.

•Buttons displayed on the screen are enclosed in [ ].

Example: [OK]

Explanation of Symbols

The meanings of the symbols that are used in this manual are explained below.

An important notice or restriction to be followed to prevent troubles due to

improper operation is written. Be sure to read it.

Supplementary information is provided to facilitate operation.

System Requirements

The hardware and software items listed below are required for using Mk2500PC.

Compatible operating systems

Windows 7 Service Pack 1 (32bit/64bit) English

Windows Vista Service Pack 2 (32bit) English

Windows XP Service Pack 3 (32bit) English

Be sure to log on as a member of Administrators when starting up.

Computer

A computer that supports any of the above operating systems.

Monitor and video driver

A Monitor capable of 1024 x 768 dots resolution and 256 color display or higher.

1280 x 1024 recommended.

When using an 1024 x 768 dot monitor, set the display font size to “Small Fonts”.

In case of using the "PC Connection Kit for Mk2100"

In case the application software and the printer driver for "Mk2100" printer have already been

installed, it is necessary to uninstall both of them in order at first.

(1) How to uninstall the application - Please uninstall it referring to the procedure as is explained

in "Uninstalling the Software (P.11)".

(2) How to uninstall the printer driver - It doesn't have an uninstaller program for the printer

driver.During the installation of the application software and the printer driver for "Mk2500"

printer, a message appears to ask whether to uninstall the printer driver for " Mk2100" printer

or not. Then please uninstall the printer driver for an Mk2100 printer according to the

message.

You can print with "Mk2100" printer by the use of the application software for "Mk2500" printer.

Installing

1. Installing

1.1 Installing Mk2500PC and the Printer Driver

Install Mk2500PC and the printer driver for the Mk2500 into your computer.

Close all applications before installing the software.

Be sure to log on as a member of Administrators when starting up.

Windows Vista/ Windows XP allows multiple users to use one computer at the same time.

However, only one user can log on to the computer when making settings.

Do not make the printer connected with the computer till installation is completed.

This CD-ROM contains programs for both 64bit use and 32bit. Please confirm your Computer

before the use.

Do not switch off the computer till installation is completed. Installation may become impossible.

1 Have ready the installation CD-ROM that contains the software.

2 Turn on your computer and start Windows.

3Insert the CD-ROM to install the software into your CD-ROM drive.

•If the CD-ROM does not start automatically, double-click the CD-ROM drive icon,

and then double-click the [Run Setup.exe] file in the [APP] folder.

•When the AutoPlay screen appears, click [Setup.exe].

Installing

•When the User Account Control dialog box appears, click the [Yes].

4Install the Mk2500PC.

(1) Click the [OK].

(2) Click the [Next].

Otros manuales para Mk2500

Tabla de contenidos

Otros manuales de Software de Canon

Canon

Canon PowerShot SD880 IS Digital ELPH Instrucciones de montaje

Canon

Canon EOS DIGITAL REBEL XT/350D DIGITAL Manual de usuario

Canon

Canon 1629B001 - XH G1 Camcorder Manual de usuario

Canon

Canon CR-1 Mark II Manual de usuario

Canon

Canon BJC-S330 Guía del usuario

Canon

Canon Optura 30 - Optura 30 MiniDV Camcorder Manual de usuario

Canon

Canon PowerShot S95 Guía de inicio rápido

Canon

Canon PowerShot SX1 IS Guía de inicio rápido

Canon

Canon EOS Rebel T3 18-55mm IS II Kit Manual de usuario

Canon

Canon PowerShot A310 Guía de seguridad

Canon

Canon CANOSCAN D660U Manual de usuario

Canon

Canon EOS Rebel T3 18-55mm IS II Kit Manual de usuario

Canon

Canon EOS 60D Manual de usuario

Canon

Canon 0744B001 - DC 10 Camcorder Manual de usuario

Canon

Canon Powershot 500 Manual de usuario

Canon

Canon 40D - EOS 40D DSLR Guía de seguridad

Canon

Canon 9320A010 - EOS Rebel XSi Starter Manual de usuario

Canon

Canon WebView LivescopeMV LE Manual de usuario

Canon

Canon CP-100 Manual de usuario

Canon

Canon PowerShot SD430 DIGITAL ELPH WIRELESS Guía de seguridad

Canon

Canon PowerShot A520 Manual de usuario

Canon

Canon CanoScan D646U Manual de usuario

Canon

Canon WebView LivescopeMV Manual de usuario

Canon

Canon Optura Pi Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Novell

Novell SP2 - S Manual de instrucciones

Lexmark

Lexmark Apps Manual de servicio