Canon PowerShot S100 DIGITAL ELPH Manual de usuario

CaHOH

7_owe,-Sho,SIO0

Camera User Guide

Make sure guide, including the "Safety

Precautions" section before using the camera.

use the camera

properly.

Store this guide use it in the future.

Getting More Out of Your

Camera

This chapter exp,ains how to shoot in TV, AV and M modes.

How to use C mode is also explained.

This chapter assumes that the camera has been set to the corresponding

mode.

117

You can set the shutter to the speed at which you want to shoot. The camera

will set the appropriate aperture value for the shutter speed you set.

TV stands for "Time value".

Setthe modedial toTv.

Adjustthe setting.

Turn the 0 ring to set the shutter speed,

Shoot.

Available Shutter Speeds

15", 13", 10", 8", 6", 5", 4", 3"2, 2"5, 2", 1"6, 1"3, 1", 0"8, 0"6, 0"5, 0"4, 0"3, 1/4, 1/5, 1/6,

1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60, 1/80, 1/100, 1/125, 1/160, 1/200,

1/250, 1/320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000

2" indicates 2 seconds, 0"3 indicates 0.3 second and 1/160 indicates 1/160

second.

If the aperture value appears in orange when the shutter button is pressed

halfway, the scene has exceeded the correct exposure limits. Adjust the shutter

speed until the aperture value appears in white (Safety shift can also be used

(p. 119)).

118

You can set the aperture to a value at which you want to shoot. The camera

will set the appropriate shutter speed for the aperture value you set.

AV stands for "Aperture value", which refers to the size of the aperture

opening inside the lens.

Set the mode dial to Av.

Adjust the setting.

Turn the 0 ring to set the aperture value.

Shoot.

Available Aperture Values

F2.0, F2.2, F2.5, F2.8, F3.2, F3.5, F4.0, F4.5, F5.0, F5.6, F5.9, F6.3, F7.1, F8.0

Depending on the zoom position, some aperture values may not be available.

If the shutter speed appears in orange when the shutter button is pressed halfway,

the scene has exceeded the correct exposure limits. Adjust the aperture value

until the shutter speed appears in white. Safety shift can also be used (see below).

In TV and AV modes, if you press the MENU button to display the _ tab, and

set [Safety Shift] to [On], the shutter speed or aperture value is automatically

adjusted for the correct exposure when it cannot otherwise be obtained.

Safety Shift is disabled when the flash is enabled.

119

You can manually set the shutter speed and aperture to shoot images with

the exposure you want.

_V_stands for "Manual".

......Set the mode dial to M.

Aperture Value

Shutter Speed _

Standard

Exposure Level

Indicator

Choose asetting.

Turn the _ dial to set the shutter speed,

and turn the 0 ring to set the aperture

value.

The set exposure level appears on the

indicator. You can check the difference

against the standard exposure level.

When the difference is more than +2 stops,

the set exposure level appears in orange.

When you press the shutter button

halfway, "-2" or "+2" appears in orange.

120

You can change the function assigned to the control ring. By performing

operations with the control ring, you can enjoy the feeling of using a fully

manual camera.

Choose a function to assign to the

0ring.

Press the RING

FUNC.button.

Press the _UNC.RINGbutton, the _ buttons, or

turn the 0 ring or 0 dial to choose an

option.

Press the @ button to complete the

function assignment.

Turn the 0 ring or the 0 dial to adjust the

_:i settings of the assigned functions.

121

Making Settings using the Control Ring

Functions Assignable to the Control Ring

The functions you can assign to the control ring differ depending on the

shooting mode. The functions assigned to the control dial also change.

Av Av

ISO

Tv, Av*

ISO

+/_

ISO

+l-

ISO

+/-

j_,_,_,_,_,_,_,_'"'_""_................_'"'"','_,,,_,,_,,_,,_,,_,,_,,_-,,,oucanusethemanualfocus_p.102_.

_ _

()You can correct the white balance (p. 82).

You can use the step zoom (p. 51).

can set i-Contrast (p. 87).

:()You can change the aspect ratio (p. 55).

You can assign functions to your liking (p. 123).

Av: aperture value (p. 119), Tv: shutter speed (p. 118), ISO: ISO speed (p. 85),

+/-: exposure compensation (p. 81), MF: manual focus (p. 102).

With _ , +_-, ZOOM,CI and I1_, the functions assignable to the • dia! are the same as

with [].

• Press the _ button to switch between setting Tv and Av.

122

Adjust,ngt.o_,os.Oot_uti!i!i!!ii!ii!iiiii_ii!_ill

_ReS_Steri.s F,,CtiO,S tO the CO"trOiRi"9...........................................

You can register which functions will be assigned to the control ring for each

Shooting mode.

choose C.

Follow Step 1 on p. 121 to choose C,

then press the MENUbutton.

choose_setti.g.

Press the 'O" buttons or turn the O dial to

choose a Shooting mode to set.

Press the ,_v buttons or turn the 0 ring to

choose a function to register to the control

ring.

The function assigned to the control dial

will be changed.

Press the MENU button to complete the

setting and restore the shooting screen.

In _V_ mode, you can choose 3 levels of flash output.

Setthe modedialto M.

choosethefl.sh outputlevel.

After pressing the _ button, immediately

turn the 0 ring to choose the flash output

level, then press the @ button.

Once set, [] will appear on the screen.

123

Adjusting the Flash Output

124

You can save commonly used Shooting modes and settings to your

preference. To switch to saved settings, simply turn the mode dial to C •

Even if you switch Shooting modes or turn off the camera, settings that

usually cancel (self timer, etc.) will be saved.

Settings that Can be Saved

Shooting modes (P, TV, AM and _V_)

Items set in P, TV, Av or M (pp. 81 - 120)

Items in the shooting menu

Zoom position

Manual focus position (p. 102)

My Menu items (p. 188)

Enter a Shooting mode and make

settings.

Choose [Save Settings].

Press the MENUbutton, choose [Save

Settings] in the O tab, then press the @

button.

Save the settings.

Press the 4_ buttons or turn the _ dial to

choose [OK], then press the @ button.

125

Otros manuales para PowerShot S100 DIGITAL ELPH

Tabla de contenidos

Otros manuales de Cámara digital de Canon

Canon

Canon PowerShot SX400 IS Manual de usuario

Canon

Canon PowerShot ELPH 100 HS IXUS 115 HS Manual de usuario

Canon

Canon Powershot SX520 HS Manual de usuario

Canon

Canon Eos 1ds mark ii Instrucciones de montaje

Canon

Canon CANON EOS 1100D Guía de instalación

Canon

Canon IXUS IIs Guía del usuario

Canon

Canon VC-C3 Manual de usuario

Canon

Canon PowerShot SX500 IS Manual de usuario

Canon

Canon PowerShot A95 Manual de instrucciones

Canon

Canon Powershot S80 Manual de instrucciones

Canon

Canon 1901B010 Manual de usuario

Canon

Canon Ixy Digital 90 Manual de usuario

Canon

Canon PowerShot SX50 HS Manual de usuario

Canon

Canon CANON EOS 1100D Manual de usuario

Canon

Canon PowerShot A470 Manual de usuario

Canon

Canon WP-DC49 Manual de usuario

Canon

Canon IXUS 180 Manual de usuario

Canon

Canon T50 Manual de usuario

Canon

Canon EOS 55 Manual de usuario

Canon

Canon Digital IXUS 990 IS Manual de usuario

Canon

Canon Powershot S2 IS Manual de usuario

Canon

Canon EOS 6D Manual de usuario

Canon

Canon Digital IXUS55 Manual de usuario

Canon

Canon Digital IXUS 300 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Nikon

Nikon Coolpix 100 Manual de usuario