Canon MP-C545 Manual de usuario

MP-C545

USER

MANUAL

Canon

User's Manual

MULTIPASS™

C545

COLOR BUBBLE JET™PRINTER

FAX • SCANNER • COPIER

Preface

This manual is copyrighted by Canon Computer Systems,Inc.(CCSI) with all

rights reserved.Under the copyright laws,this manual may not be reproduced in

any form,in whole or part, without prior written consent of CCSI.

Portions copyrighted by Infowave Software Inc.and Second Glance Software.

Disclaimer

Canon Computer Systems,Inc.has reviewed this manual thoroughly in order to

make it an easy to use guide for your Canon MultiPASS system.All statements,

technical information,and recommendations in this guide and in any guides or

related documents are believed reliable,but the accuracy and completeness

thereof are not guaranteed or warranted,and they are not intended to be,nor

should they be understood to be,representations or warranties concerning the

products described.

YourMultiPASS andthesoftwaremediaincludedwithyoursystemhavebeensold

to you subject to the limited warranties set forth in the warranty and license

agreement enclosed with the respective products.All software is licensed AS IS,as

described in the license agreement enclosed with the software media.Further,

CCSI reserves the right to make changes in the speciﬁcations of the products

describedinthisguideatanytimewithoutnoticeandwithoutobligationtonotify

any person of such changes.

Trademarks

Canon,BCI, BJ,Bubble Jet,MultiPASS,ScanGear,and UHQ are trademarks and

SelectExchange is a service mark of Canon Inc.

PowerPrint,SpoolMaster, and the Infowave logo are trademarks of Infowave

Software Inc.

Apple,Finder,ColorSync and Macintosh are registered trademarks of Apple

Computer, Inc. ScanTastic is a trademark of Second Glance Software.

Portions copyrighted by Infowave Software,Inc. and Second Glance Software.

All other product and brand names are trademarks or service marks of their

respective owners.

ENERGY STAR

COMPLIANT

As an ENERGY STAR® Partner,Canon U.S.A., Inc.has determined that this

product meets the ENERGY STAR® guidelines for energy efﬁciency.

Preface

iii

Users in the U.S.A.

PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE

EQUIPMENT

A. Location

Supply a suitable table,cabinet,or desk.See Appendix A for the unit’s

dimensions and weight.

B. Order Information

1. Only a single line, touch-tone or rotary telephone set is to be used.

2. Order an RJ11-C modular jack (USOC code),which should be

installed by the phone company. If the RJ11-C jack is not present,

installation cannot occur.

3. Orderanormalbusinesslinefromyourtelephonecompany’sbusiness

representative.The line should be a regular voice grade line or the

equivalent.Use one line per unit.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD(INTERNATIONALDIRECTDISTANCEDIAL)LINEIFYOU

COMMUNICATE OVERSEAS

C. Power Requirements

This equipment should be connected to a standard 120 volt AC, three-wire

grounded outlet only.Do not connect this unit to an outlet or power line

shared with other appliances that cause“electrical noise”.Air conditioners,

electric typewriters,copiers,and machines of this sort generate electrical

noise which often interferes with communications equipment and the

sending and receiving of documents.

Canon recommends an individual line following industry standards,e.g.the

2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones.A dedicated

extension off a PBX unit without“Call Waiting”can be used with your

MultiPASS.Key telephone systems are not recommended because they send

non-standard signals to individual telephones for ringing and special codes,

which may cause a fax error.

Preface

CONNECTION OF THE EQUIPMENT

This equipment complies with Part 68 of the FCC rules.On the rear panel of this

equipment is a label that contains,among other information,the FCC

RegistrationNumber and Ringer EquivalenceNumber (REN) for this equipment.

If requested,this information must be given to the telephone company.This

equipment may not be used on coin service provided by the telephone company.

Connection to party lines is subject to state tariffs.

An FCC compliant telephone cord and modular jack is provided with this

equipment.Thisequipmentisdesigned tobeconnected to the telephonenetwork

or premises wiring using a compatible modular jack which is Part 68 compliant.

See Installation instructions for details.

The REN is used to determine the quantity of devices which may be connected to

the telephone line.Excessive RENs on the telephone line may result in the devices

not ringing in response to an incoming call.In most, but not all areas,the sum of

the RENs should not exceed ﬁve (5.0).To be certain of the number of devices that

may be connected to the line,as determined by the total RENs,contact the

telephone company to determine the maximum REN for the calling area.

IN CASE OF EQUIPMENT MALFUNCTION

Should any malfunction occur which cannot be corrected by the procedures

describedinthis

User’sManual

,disconnecttheequipmentfromthetelephoneline

or unplug the power cord.The telephone line should not be reconnected

or the power cord plugged in until the problem is completely resolved.Users

should contact CanonAuthorized Service Facilities for servicing of equipment.

Information regarding Authorized Service Facility locations can be obtained by

calling the Canon Computer Systems Customer Care Center. (See page 1-9 for

details.)

Preface

RIGHTS OF THE TELEPHONE COMPANY

Should the equipment cause harm to the telephone network,the telephone

company may temporarily disconnect service.The telephone company also

retains the right to make changes in facilities and services which may affect the

operation of this equipment.When such changes are necessary, the telephone

company is required to give adequate prior notice to the user.

WARNING

Do not make any changes or modiﬁcations to the equipment unless otherwise

speciﬁed in this manual.If such changes or modiﬁcations should be made,you

could be required to stop operation of the equipment.

MultiPASS C545: Facsimile Transceiver, Model H12159

This device complies with Part 15 of the FCC Rules.Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference,and

(2) this device must accept an interference received,including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class

B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.This equipment generates,uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.However,there is no

guarantee that interference will not occur in a particular installation.If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,the user is

encouraged to try to correct the interference by one or more of the following

measures:

❑

Reorient or relocate the receiving antenna.

❑

Increase the separation between the equipment and receiver.

❑

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

❑

Consult the dealer or an experienced radio/TV technician for help.

Preface

Useof shieldedcableisrequiredtocomplywith class B limits in Subpart Bof Part

15 of FCC Rules.Do not make any changes or modiﬁcations to the equipment

unlessotherwisespeciﬁedin thismanual.If suchchangesormodiﬁcations should

be made,you could be required to stop operation of the equipment.

TheTelephoneConsumerProtectionActof 1991makesitunlawfulforanyperson

to use a computer or other electronic device to send any message via a telephone

faxmachineunlesssuch messageclearlycontainsin amarginatthe topor bottom

of eachtransmittedpage orontheﬁrstpageof the transmission,thedateandtime

it is sent and an identiﬁcation of the business or other entity,or other individual

sending the message and the telephone number of the sending machine or such

business,other entity,or individual.

To automatically enter this information into your MultiPASS, follow the

instructions in your

Quick Start Guide

Preface

vii

Users in Canada

PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE

EQUIPMENT

A. Location

Supply a suitable table,cabinet,or desk.See

Appendix A

for the unit’s

dimensions and weight.

B. Order Information

1. Only a single line, touch-tone or rotary telephone set terminated with

astandard4-pinmodular phoneplug.(Touchtoneisrecommended if

available in your area.)

2. Order an RJ11-C modular jack (USOC code),which should be

installed by the phone company. If the RJ11-C jack is not present,

installation cannot occur.

3. Orderanormalbusinesslinefromyourtelephonecompany’sbusiness

representative.The line should be a regular voice grade line or

equivalent.Use one line per unit.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD(INTERNATIONALDIRECTDISTANCEDIAL)LINEIFYOU

COMMUNICATE OVERSEAS

Canon recommends an individual line following industry standards,e.g.the

2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones.A dedicated

extension off a PBX without“Camp On”signals is also permissable with your

MultiPASS.Key telephone systems are not recommended because they send

non-standard signals to individual telephones for ringing and special codes,

which may cause a fax error.

viii

Preface

C. Power Requirements

The power outlet should be a three-prong grounded receptacle (Single or

Duplex).It should be independent from copiers,heaters,air conditioners

or any electric equipment that is thermostatically controlled.The rated

value is 120 volts and 15 amperes.The RJ11-C modular jack should be

relatively close to the power outlet to facilitate installation.

NOTICE

TheIndustryCanadalabelidentiﬁescertiﬁedequipment.Thiscertiﬁcationmeans

that the equipment meets telecommunications networks protective,operational

and safety requirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s).The Department does not guarantee the

equipment will operate to the user’s satisfaction.

Before installing this equipment,users should ensure that it is permissible to be

connected to the facilities of the local telecommunications company.The

equipment must also be installed using an acceptable method of connection.The

customer should be aware that compliance with the above conditions may not

prevent degradation of service in some situations.

Repairs to certiﬁed equipment should be coordinated by a representative

designated by the supplier.Any repairs or alterations made by the user to this

equipment,or equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility,telephone lines and internal metallic water pipe

system,if present,are connected together. This precaution may be particularly

important in rural areas.

Users should not attempt to make such connections themselves,but should

contact the appropriate electric inspection authority, or electrician,as

appropriate.

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

CetappareilnumériquedelaclasseBrespectetouteslesexigencesduRèglement

sur le matériel brouilleur du Canada.

Preface

TheRingerEquivalenceNumber(REN)assignedtoeachterminaldeviceprovides

an indication of the maximum number of terminals allowed to be connected to a

telephone interface. The termination on an interface may consist of any

combinationof devicessubjectonly to therequirement thatthesumof the Ringer

Equivalence Numbers of all the devices does not exceed 5.The REN of this

product is 0.3.

CANON CANADA INC.

1-800-263-1121

24 HOURS A DAY,SEVEN DAYS A WEEK

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon MB5000 Series Guía de configuración

Canon

Canon PIXMA MP130 Manual de usuario

Canon

Canon PIXMA MP970 Manual de usuario

Canon

Canon imageRunner 2022 Manual de usuario

Canon

Canon imageRUNNER 2830 Manual de usuario

Canon

Canon imagePROGRAF TX-2000 Manual del propietario

Canon

Canon 2911B002 Manual de usuario

Canon

Canon 3920B009 Manual de usuario

Canon

Canon imageCLASS X MF1127C Manual de usuario

Canon

Canon MF746Cx Manual de usuario

Canon

Canon PIXMA MG6320 Manual

Canon

Canon PIXMA MX860 series Manual de usuario

Canon

Canon PIXMA MX850 Manual de usuario

Canon

Canon IR5000 - iR B/W Laser Manual de usuario

Canon

Canon imageRUNNER ADVANCE C5255 Instrucciones de montaje

Canon

Canon imageRUNNER 6570 Instrucciones de instalación y mantenimiento

Canon

Canon imageclass MF229DW Manual de usuario

Canon

Canon MultiPASS F20 Manual

Canon

Canon Color imageCLASS MF8580Cdw Guía de instalación

Canon

Canon PIXMA MG7500 Series Guía de configuración

Canon

Canon GP160F Manual de usuario

Canon

Canon imageCLASS D660 Manual de usuario

Canon

Canon imageCLASS D550 Instrucciones de montaje

Canon

Canon imageRUNNER Advance C2020i Instrucciones de funcionamiento e instalación

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario