CALEFFI 543 Series Manual de usuario

Temperature safety relief valve

543 series

General description

Temperature safety relief valves are manufactured by Caleffi S.p.A. in

compliance with the essential requirements contained in Directive

97/23/EC of the European Parliament and of the Council of the

European Union to harmonise member state regulations on pressure

equipment.

Function

The temperature safety relief valves limit the temperature of water

in multi-fuel or solid fuel boilers with either a boiler incorporated or

an emergency heat exchanger.

When the temperature reaches 95°C, the valve starts to discharge

the necessary amount of water to keep the boiler temperature

within the safety limits.

Its use is specified by I.S.P.E.S.L. regulations (collection “R” - pub-

2005), it complies with EN 14597 and can be used on systems that

comply with EN 12828, relating to solid fuel boilers with a power

output of less than 100 kW.

Technical specification

Materials:

Body: brass EN 12165 CW617N, chrome plated

Control spindle: brass EN 12164 CW617N

Obturator seal: EPDM

Seals: EPDM

Spring: stainless steel

Protection cover: POM

Performance:

Max. working pressure: 10 bar

Set temperature: 95°C

Temperature range: 5–110°C

Discharge flow rate at 110°C and Δp 1 bar: 3000 l/h

Ambient temperature range: 0–80°C

Action type (EN 14597): 2 KP

Max. temperature of the sensor: 130°C

Medium: water

PED category: IV

Connections: 3/4” F x 3/4” F

Probe connection: 1/2” M

Capillary length: 1300 mm

Dimensions

CALEFFI

Product range

Code 543513 Temperature safety relief valve Size 3/4”

01057/07 GB

replaces dp 01057/05

BSI EN ISO 9001:2000

Cert. n°FM 21654

UNI EN ISO 9001:2000

Cert. n°0003

3/4”

Ø 40

Ø 42

Code

543513

Weight (kg)

1,06

1/2”

197

1115

Code 543513

Temperature safety relief valve. EC certified and approved to German DIN standards. Redundant safety sensor. Connections 3/4”

F. Chrome plated brass body. Stainless steel spring. EPDM seals. Temperature range 5 –110°C. Nominal set temperature 95°C.

Maximum working pressure 10 bar. Complete with 1/2” M remote probe with pocket. Length of capillary 1300 mm.

SPECIFICATION SUMMARIES

Operating principle

When the temperature rises, the fluid contained within the sensor

(1) undergoes a change of state from liquid to gas. The consequent

volume increase creates a mechanical movement causing the

expandable bellows (2), inside the valve, to push on the obturator

and lift it up.

Construction details

Redundant expansion system

The entire expansion system has a built-in

redundancy (1)-(2) to ensure maximum

safety, so if one part of the sensor system

fails the other part will perform the same

functions as the entire sensor.

Pocket and capillary tubes

The size of the pocket is such that it is always in contact with the

sensors, which improves heat transmission and keeps thermal

inertia to a minimum. The capillary tubes are protected by a

galvanized sheath.

Bellows holder support

The bellows holder support is made of

acetalic resin and can be repositioned by

loosening the knurled lock nut.

Drain

The lower part of the valve contains a button

in order to drain the system.

1 2

➩

We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.

CALEFFI S.P.A. · I · 28010 FONTANETO D’AGOGNA (NO) · S.R. 229, N.25 ·TEL. +39 0322 8491 R.A. ·FAX +39 0322 863723

· www.caleffi.com ·info@caleffi.com ·

CALEFFI

Installation

DOMESTIC

water supply

safety

discharge

mains

inlet

Hot

water

storage

safety

discharge

mains

inlet

The sensor should be mounted at the top of the boiler or on the

outlet piping upstream of any isolating device and at a maximum

distance of 0,5 m.

1. After mounting the valve on the pipe, according to the flow

direction indicated on the valve body, place the part connected

to the sensor in its seat.

2. Loosely tighten the knurled lock nut.

3. Position the sheath outlet that connects the probe by turning the

black cap. Completely tighten the knurled lock nut.

Installation of

the temperature

safety relief valve

in boilers with

built-in heater.

Installation of

the temperature

safety relief valve

in the emergency

heat exchanger.

Accessories

We recommend

inserting a visible

discharge tundish

(5521 series Caleffi)

when connecting the

device to the

discharge pipe.

123

Otros manuales para 543 Series

Otros manuales de Unidad de control de CALEFFI

CALEFFI

CALEFFI FlowCal 127 Series Manual de usuario

CALEFFI

CALEFFI MixCal 521410A Guía

CALEFFI

CALEFFI altecnic 201-2001 Guía

CALEFFI

CALEFFI 5230 Series Manual de usuario

CALEFFI

CALEFFI Z-one ZSR10 Series Manual de usuario

CALEFFI

CALEFFI 553 Series Manual de usuario

CALEFFI

CALEFFI 580011 Manual de usuario

CALEFFI

CALEFFI 642 Series Manual de usuario

CALEFFI

CALEFFI 359 Series Manual de usuario

CALEFFI

CALEFFI QuickSetter+ 132 Series Manual de usuario

CALEFFI

CALEFFI LEGIOMIX 600094A Guía

CALEFFI

CALEFFI 146 Series Guía

CALEFFI

CALEFFI AutoFill 5350 Series Guía del usuario

CALEFFI

CALEFFI 521201 Guía

CALEFFI

CALEFFI 639042 Guía

CALEFFI

CALEFFI LEGIOMIX 6000 series Guía

CALEFFI

CALEFFI 642 Series Manual de usuario

CALEFFI

CALEFFI 510 Series Manual de usuario

CALEFFI

CALEFFI DISCAL 551 Series Manual de usuario

CALEFFI

CALEFFI 5350 Series Manual de usuario

CALEFFI

CALEFFI LEGIOMIX 6000 series Guía

CALEFFI

CALEFFI 630 Series Manual de usuario

CALEFFI

CALEFFI ThermoBloc 281 Series Manual de usuario

CALEFFI

CALEFFI QuickSetter+ 132 Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario