Calculated Industries ULTRA MEASURE MASTER 8020 Manual de usuario
U
LTRA
M
EASURE
M
ASTER
®
PROFESSIONAL GRADE U.S. STANDARD
TO METRIC CONVERSION CALCULATOR
Model 8020
Pocket Reference Guide
➡
➡
Insert This
Direction
f
POCKET REFERENCE GUIDE — 1
The
Ultra Measure Master
calculator sim-
plifies conversions between Metric and
Imperial weights and measures. The
Ultra
Measure Master
can convert the following
types of dimensions:
• Linear
• Area
• Volume
• Weight
• Temperature
• Linear Velocity
• Volumetric Velocity (Flow Rates)
• Pressure
• Bending Moment
In addition to the above, the
Ultra Measure
Master
performs dimensional calculations
with ease!
ULTRA MEASURE MASTER®
POCKET REFERENCE GUIDE — 2
GETTING STARTED...............................3
Key Definitions.....................................3
Power On and Off..............................11
Conventions and Units of Measure ...11
Fractional Settings.............................14
Preference Feature............................15
Using Exponential Notation...............17
Setting Flashing Denominator...........18
Basic Math Operations......................19
Memory Operation.............................22
Paperless Tape Feature ....................24
USING THE ULTRA MEASURE
MASTER ...............................................26
Entering Dimensions and Units.........26
Linear Conversions............................27
Area Conversions..............................29
Volume Conversions..........................31
Weight Conversions ..........................33
Weight/Volume Conversions .............35
Temperature Conversions .................38
Linear Velocity Conversions..............39
Volumetric Velocity Conversions .......40
Pressure Conversions.......................42
Bending Moment Conversions .........43
APPENDIX ............................................45
Accuracy/Errors.................................45
Battery Information ...........................46
Specifications.....................................46
REPAIR AND RETURN.........................47
Warranty, Repair and Return
Information .....................................47
WARRANTY..........................................48
TABLE OF CONTENTS
POCKET REFERENCE GUIDE — 3
KEY DEFINITIONS
+ – x Arithmetic operation keys.
÷ =
%Four-function (+, –, x, ÷)
percent key
0– 9Keys used for entering
and •numbers.
O
Off Key
— Turns all power
off.
o
On/Clear Key
— Turns on
power. Pressing once
clears the display. Pressing
twice clears all temporary
registers.
ß
Storage Key
— Used to
store values.
®
Recall Key
— Recalls val-
ues stored in registers.
Ç
Convert Key
— Used with
dimension keys to convert
dimensions, or with other
keys to access special
functions.
s
Shift Key
— Used with
other keys to access units
of measure or other special
functions.
GETTING STARTED
POCKET REFERENCE GUIDE — 4
g
Gallon Key
— Displays and
enters value as gallons.
F
Fluid Ounces Key
—
Displays and enters value
as fluid ounces.
L
Liter Key
— Displays and
enters value as liters.
Â
Milliliter Key
— Displays
and enters value as milliliters.
t
Ton Key
— Displays and
enters value as tons.
l
Pounds Key
— Displays
and enters value as pounds.
d
Dry Ounces Key
—
Displays and enters value
as dry ounces.
k
Kilograms Key
— Displays
and enters value as kilo-
grams.
G
Grams Key
— Displays
and enters value as grams.
S
Square Key
— Defines a
square dimension.
m
Meters Key
— Displays
and enters value as meters.
c
Centimeter Key
—
Displays and enters value
as centimeters.
POCKET REFERENCE GUIDE — 5
M
Millimeter Key
— Displays
and enters value as milli-
meters.
K
Kilometer Key
— Displays
and enters value as kilo-
meters.
y
Yards Key
— Displays and
enters value as yards.
f
Feet Key
— Enters or con-
verts to
feet
as whole or
decimal number. Also used
with the iand /keys
for entering Feet-Inch val-
ues (e.g., 6f9i1
/ 2). Repeated presses
during conversions toggle
between Fractional and
Decimal Feet.
i
Inch Key
— Enters or con-
verts to
inches
. Entry can
be whole or decimal num-
ber. Also used with the /
key for entering fractional
inch values (e.g., 9 i 1
/ 2). Repeated presses
during conversions toggle
between Fractional and
Decimal Inches.
/
Fraction Key
— Used to
separate the numerator and
denominator when entering
fractions: 1 / 2
POCKET REFERENCE GUIDE — 6
µ
Miles Key
— Displays and
enters value as miles.
s g
Gallons per Minute (gpm)
— Displays and enters
value as gallons per minute.
s F
Fluid Ounces per Second
(oz/sec)
— Displays and
enters value as fluid ounces
per second.
s L
Liters per Second
(liters/sec)
— Displays and
enters value as liters per
second.
s Â
Milliliters per Second
(mL/sec)
— Displays and
enters value as milliliters
per second.
s %
Weight per Volume
(wt/vol)
— Displays and
enters weight per volume
ratio in permanent memory.
s t
Metric Tons (met tons)
—
Displays and enters value
as metric tons.
s l
Pounds per Square Inch
(psi)
— Displays and
enters value as pounds per
square inch.
POCKET REFERENCE GUIDE — 7
s d
Pounds per Square Foot
(psf)
— Displays and
enters value as pounds per
square foot.
s k
Kilopascals (kPa)
—
Displays and enters value
as kilopascals.
s G
Megapascals (MPa)
—
Displays and enters value
as megapascals.
s S
Cubic Volume (Cu)
—
Displays and enters a cubic
dimension.
s m
Meters per Minute
(m/min)
— Displays and
enters value as meters per
minute.
s c
Meters per Second
(m/sec)
— Displays and
enters value as meters per
second.
s M
Millimeters per Second
(mm/sec)
— Displays and
enters value as millimeters
per second.
s K
Kilometers per Hour
(km/h)
— Displays and
enters value as kilometers
per hour.
POCKET REFERENCE GUIDE — 8
s y
Feet per Minute (ft/min)
—
Displays and enters value
as feet per minute.
s f
Feet per Second (ft/sec)
— Displays and enters
value as feet per second.
s i
Inches per Second
(in/sec)
— Displays and
enters value as inches per
second.
s /
Exponential Notation
(EXP)
— Used to enter an
exponential value (i.e., x10y).
s µ
Miles per Hour (mph)
—
Displays and enters value
as miles per hour.
s 9
Newton-meters (N-m)
—
Displays and enters value
as newton-meters.
s 8
Foot-Pound (ft-lbs)
—
Displays and enters value
as foot pounds.
s 7
Inch-Pounds (in-lbs)
—
Displays and enters value
as inch pounds.
s 6
Acre-Feet (Acre-Ft)
—
Displays and enters value
as acre-feet.
s 5
Acre
— Displays and
enters value as acres.
POCKET REFERENCE GUIDE — 9
s 4
Hectare
— Displays and
enters value as hectares.
s 3
Fahrenheit (°F)
— Displays
and enters value as
Fahrenheit.
s 2
Celsius (°C)
— Displays
and enters value as Celsius.
s 1
Board Feet (BdFt)
—
Displays and enters value
as board feet.
s •
Per Unit Function (Per)
—
Allows you to calculate total
material cost, if you multiply
the total amount of material
by the per unit cost of the
item.
s –
Change Sign (+/–)
—
Toggles the sign of the dis-
played value.
s ÷
Square Root Function
( )
— Calculates and
displays the square root of
a number. You will get an
error if you try to find the
square root of a linear or
volume value.
Ç +
Pi Constant (
π
)
— An inter-
nal constant: 3.141593.
Tabla de contenidos
Otros manuales de Calculadora de Calculated Industries
Calculated Industries
Calculated Industries Pocker Real Estate Master 3400 Manual de usuario
Calculated Industries
Calculated Industries PlumbingCalc Pro Manual de usuario
Calculated Industries
Calculated Industries 4054 Manual de usuario
Calculated Industries
Calculated Industries ProjectCalc Plus MX 8528 Manual de usuario
Calculated Industries
Calculated Industries Ultra Measure Master Manual de usuario
Calculated Industries
Calculated Industries PIPE TRADES PRO 4095 Manual de usuario
Calculated Industries
Calculated Industries 4088 Manual de usuario
Calculated Industries
Calculated Industries Qualifier Plus IIcx Manual de usuario
Calculated Industries
Calculated Industries Sheet Metal/HVAC Pro Calc Manual de usuario
Calculated Industries
Calculated Industries 3416 Manual de usuario
Calculated Industries
Calculated Industries Quilter's FabriCalc 8400 Manual de usuario
Calculated Industries
Calculated Industries 9530 Manual de usuario
Calculated Industries
Calculated Industries ConcreteCalc Manual de usuario
Calculated Industries
Calculated Industries KitchenCalc 8300 Manual de usuario
Calculated Industries
Calculated Industries 3420 Manual de usuario
Calculated Industries
Calculated Industries KitchenCalc 8300 Manual de usuario
Calculated Industries
Calculated Industries PROJECTCALC Manual de usuario
Calculated Industries
Calculated Industries 6260 Manual de usuario
Calculated Industries
Calculated Industries Construction Master plus EZ 4067 Manual de usuario
Calculated Industries
Calculated Industries PROJECTCALC CLASSIC 8503 Manual de usuario
