Calculated Industries Quilter's FabriCalc 8400 Manual de usuario
Quilt Design and Fabric
Estimating Calculator
Model 8400
Pocket Reference Guide
INTRODUCTION
The new
Quilter’s FabriCalc
Design and
Fabric Estimating Calculator is perfect for
all of your design needs.
The
Quilter’s FabriCalc
easily calculates
your material yardage so you can focus on
creativity.
Your Calculator Helps You Solve:
• Quilt Fabric Yardage for any size or
style of quilt, including:
• Backing Yardage
• Border Yardage (mitered or straight
corners)
• Drop Yardage (mitered or straight
corners)
• Binding Yardage
• Yardage for various sizes of Blocks,
including Sashing, if needed.
• Yardage, cut sizes (including seam)
and number of strips to cut for various
sizes of Squares, including 1/2
Square and 1/4 Square Triangles.
• Yardage, cut sizes (including seam)
and number of strips to cut for 45˚
and 60˚ Diamonds.
• Also calculates number of Squares or
Diamonds that can be cut from any
size of fabric you want to use – make
the most of your “stash” of fabric.
• Easily keep track of how much fabric
you need for various colors of fabrics;
store up to six different types of fabrics.
TABLE OF CONTENTS
INTRODUCTION
GETTING STARTED ................................1
Basic Operation and Entry Keys ............1
Fabric Default Values ............................2
Yardage and Meterage Keys..................3
Converting Fractional Yardage to
Decimal Yardage ..............................4
Converting Yardage to Meterage ........4
Dimensional Measurement Unit Keys ....5
Entering Linear Dimensions ................5
Entering Area Dimensions ..................6
Additional Functions ..............................7
CALCULATING QUILT YARDAGE ..........7
Quilt Top Length, Top Width,
Border and Drop ................................10
Calculating the Quilt’s Diagonal............12
CALCULATING BLOCK YARDAGE......13
Blocks (Square-Shaped),
Including Sashing ..............................16
Blocks (Rectangular-Shaped),
No Sashing ........................................18
Calculating the Block’s Diagonal..........20
CALCULATING YARDAGE FOR
SQUARES, TRIANGLES
AND DIAMONDS ................................20
Yardage Required for a
Number of Squares............................24
Number of Squares Calculated
From Fabric (“Stash”) ........................25
Number of Squares Calculated
From Fabric (Length) ........................26
FABRIC STORAGE................................27
Storing Yardage for Multiple Fabrics ....28
MEMORY OPERATION..........................30
Basic Cumulative Memory (M+)
Example ............................................31
CALCULATING COST OF MATERIAL ....32
Fabric Cost Example............................32
UNIT CONVERSIONS .......................... 33
Converting Fractional Inches to
Decimal Inches ..................................33
Converting Inches to Centimeters,
Millimeters ............................................33
Area Conversions ................................34
BASIC MATH..........................................34
Adding Values ......................................34
Subtracting Values................................35
Multiplying Values ................................35
Dividing Values ....................................36
Percentage Calculations ......................37
APPENDIX A — DEFAULT SETTINGS 38
Reset Function......................................38
APPENDIX B —
PREFERENCE SETTINGS..................39
How to Set Preferences........................39
Accessing Preference Settings ............39
APPENDIX C —
OPERATING INSTRUCTIONS ............41
Battery ..................................................41
Battery Replacement Instructions ........42
APPENDIX D — ACCURACY, ERRORS
AND AUTO SHUT-OFF........................42
Accuracy/Errors....................................42
Auto Shut-Off........................................43
APPENDIX E - REPAIR AND RETURN 44
WARRANTY............................................45
INDEX ....................................................48
POCKET REFERENCE GUIDE — 1
GETTING STARTED
Your calculator is designed to work
with common fabric measurements for
easy calculation of various quilt
requirements.
Your calculator is defaulted to display
the calculated results in fractional for-
mat. You can also set your calculator
to display in decimal or metric format
(see Preference Settings for details
on how to change formats).
Basic Operation and Entry Keys
N— On/Clear Key
Turns on power. Pressing once
clears the display. Pressing twice
clears all temporary values.
F— Off Key
Turns all power off, clearing all
entered Quilt, Block, and Square
values. Your calculator is also
designed to shut itself off after
about 8-12 minutes of non-use.
+-x÷=
Arithmetic operation keys. See
Basic Math section for details.
%
Four-function (+, –, x, ÷) percent
key. See Percentage Calculations
section for details.
POCKET REFERENCE GUIDE — 2
0– 9and •
Keys used for entering digits.
/— Fraction Bar
Used to enter fractions. Fractions
may be entered as proper (1/2, 1/3,
1/4, 1/8) or improper (7/6, 9/3).
They will be displayed in 1/8, 1/4,
1/3, or 1/2 increments. You can also
use /to toggle between fractional
and decimal displays.
c
Used to convert between units of
measure or access secondary
functions.
R
Used for recalling entered or stored
values.
Fabric Default Values
These keys are used for storing
values used for proper calculation of
fabric Yardage.
c+— Seam
Stores the Seam width (default: 1/4
Inch). This value is used in the
material functions for proper
material calculations.
POCKET REFERENCE GUIDE — 3
c 8 — Binding Cut
Stores the Binding Cut Width
(default: 2 1/2 Inches). This value is
used in the Binding calculation
found in the Total Quilt Yardage
function. This value should be
stored with seam allowance
included in the stored value (no
seam allowance adjustments are
made to the Binding calculations).
c - — Fabric Width
Stores the Fabric Width (default: 40
Inches). This value is used in all of
the material functions for providing
the proper Yardage based on the
stored Fabric Width.
c ÷ —Backing +
Stores the Backing Overage (default:
4 Inches). This value is used in the
Backing calculation found in the Quilt
Yardage function, and is added to all
four sides of the quilt to accommo-
date the extra material needed for
the quilting process.
Yardage and Meterage Keys
y— Yardage
Enters or converts to
Yardage (linear
Yards
).
Yardage
is based on the
stored Fabric Width (default is 40
Inches). Also used with the /key for
entering fractional Yardage values
(e.g., 4y1/2).
(Cont’d)
POCKET REFERENCE GUIDE — 4
Note:
Repeated presses after
c
toggle
between fractional and decimal values
(e.g.,
4y1/2cy
converts to 4.5
linear Yards (“yardage”); press
y
again to
return to fractional Yardage).
m—Meterage
Enters or converts to linear
Meters
.
Meterage
is based on the stored
Fabric Width (default is 40 Inches,
but you may store any fabric width
desired (e.g. 1 Meter).
Convert Fractional Yardage to
Decimal Yardage
Convert 8-1/8 Yards to Decimal Yards.
Then convert back to Fractional Yards.
KEYSTROKE DISPLAY
N N 0.
8y1/8 8-1/8 YD
c y 8.125 YD
c y 8-1/8 YD
Convert Yardage to Meterage
Convert 8-1/8 Yards to Meterage.
KEYSTROKE DISPLAY
N N 0.
8y1/8 8-1/8 YD
c m 7.430 M
(Cont’d)
POCKET REFERENCE GUIDE — 5
Dimensional Measurement Unit Keys
The following keys are used for
entering units of measure, with ease
and accuracy:
i— Inch
Enters or converts to
Inches
. Also
used with the /key for entering
fractional Inch values (e.g., 9 i
1 / 2).
Note:
Repeated presses after
c
toggle
between fractional and decimal Inches (e.g.,
9 i 1 / 2 c i
converts to 9.5 Inch;
press
i
again to return to Inch-Fractions).
ç— Centimeters
Enters or converts to
Centimeters
.
c 9 — Millimeters
Enters or converts to
Millimeters
.
Entering Linear Dimensions
When entering fractional values for
Inches, identify your entry by using the
ikey
.
Enter fractions by entering the
numerator (top), pressing /(fraction
bar key) and then the denominator
(bottom). Press Nafter each
example.
INCH KEYSTROKE
5 Inch 5 i
5-1/2 Inches 5 i 1 / 2
5.5 Inches 5•5i
(Cont’d)
POCKET REFERENCE GUIDE — 6
CENTIMETERS KEYSTROKE
5 Centimeters 5 ç
5.5 Centimeters 5•5ç
MILLIMETERS KEYSTROKE
5 Millimeters 5 c 9
5.5 Millimeters 5•5c9
Entering Area Dimensions
You can enter or calculate area values
for Inches, Centimeters, or Millimeters.
For instance, if you are working with a
piece of fabric that is 40 Inches x
10 Inches (400 sq. Inches), you can
enter this area for use in the Square,
Triangle, and Diamond functions
(see sections for examples).
INCH KEYSTROKE
400 sq. in. 400ii
25.5 sq. in. 25•5ii
CENTIMETERS KEYSTROKE
100 sq. cm 100çç
25.5 sq. cm 25•5çç
MILLIMETERS KEYSTROKE
100 sq. mm 100c99
25.5 sq. mm 25•5c99
Note:
Yardage and Meterage are linear functions,
linked to Fabric Width. They do not allow entry of
Square or Cubic Yards or Meters.
(Cont’d)
Otros manuales para Quilter's FabriCalc 8400
1
Tabla de contenidos
Otros manuales de Calculadora de Calculated Industries
Calculated Industries
Calculated Industries Pocket Handyman IV Manual de usuario
Calculated Industries
Calculated Industries MACHINIST CALC PRO Manual de usuario
Calculated Industries
Calculated Industries 43285 Manual de usuario
Calculated Industries
Calculated Industries 5060 Manual de usuario
Calculated Industries
Calculated Industries ULTRA MEASURE MASTER 8025 Manual de usuario
Calculated Industries
Calculated Industries 4325 Manual de usuario
Calculated Industries
Calculated Industries ElectriCalc Pro Manual de usuario
Calculated Industries
Calculated Industries 4054 Manual de usuario
Calculated Industries
Calculated Industries 3423 Manual de usuario
Calculated Industries
Calculated Industries 4030 Manual de usuario
Calculated Industries
Calculated Industries CONVERSIONCALC PLUS Manual de usuario
Calculated Industries
Calculated Industries PIPE TRADES PRO 4095 Manual de usuario
Calculated Industries
Calculated Industries PROJECTCALC CLASSIC 8503 Manual de usuario
Calculated Industries
Calculated Industries 8515 Manual de usuario
Calculated Industries
Calculated Industries Measure Master 4018 Manual de usuario
Calculated Industries
Calculated Industries PROJECTCALC Manual de usuario
Calculated Industries
Calculated Industries HeavyCalc Manual de usuario
Calculated Industries
Calculated Industries Ultra Measure Master Manual de usuario
Calculated Industries
Calculated Industries Time Master II Manual de usuario
Calculated Industries
Calculated Industries ConcreteCalc Manual de usuario
