Burkert 8200 Series Manual de usuario

Operating Instructions

Bedienungsanleitung

Manuel d‘utilisation

Type 8200

Hygienic Holder

Hygienischer Sondenhalter

Support hygiénique

We reserve the right to make technical changes without notice.

Technische Änderungen vorbehalten.

Sous réserve de modifications techniques.

Operating Instructions 1304/0_EU-ML_00564991_Original_FR

Type 8200

1. ABOUT THIS MANUAL .................................................................................4

1.1. Symbols used .......................................................................................4

1.2. Definition of the word "holder" ....................................................4

2. INTENDED USE ................................................................................................5

3. BASIC SAFETY INFORMATION ....................................................................5

4. GENERAL INFORMATION ...........................................................................6

4.1. International contacts .......................................................................6

4.2. Warranty conditions ...........................................................................6

4.3. Information on the Internet ............................................................6

5. DESCRIPTION ...................................................................................................7

5.1. Area of application .............................................................................7

5.2. Available versions ...............................................................................7

6. TECHNICAL DATA ...........................................................................................7

6.1. Conditions of use ................................................................................7

6.2. Materials ..................................................................................................7

6.3. Dimensions ............................................................................................8

7. INSTALLATION, COMMISSIONING ..................................................................9

7.1. Safety instructions..............................................................................9

7.2. Assembling the probe ...................................................................10

7.3. Assembling the holder ................................................................10

8. MAINTENANCE AND CLEANING .........................................................11

8.1. Safety instructions...........................................................................11

8.2. Maintenance ........................................................................................11

8.3. Cleaning ................................................................................................11

9. SPARE PARTS AND ACCESSORIES .................................................12

10. PACKAGING AND TRANSPORT.........................................................12

11. STORAGE .......................................................................................................12

12. DISPOSAL OF THE PRODUCT ........................................................... 13

Contents

English

About this manual

Type 8200

1. ABOUT THIS MANUAL

This manual describes the entire life cycle of the hygienic holder.

Please keep this manual in a safe place, accessible to all users and

any new owners.

This manual contains important safety information.

Failure to comply with these instructions can lead to hazardous

situations.

• This manual must be read and understood.

1.1. Symbols used

danger

Warns against an imminent danger.

• Failure to observe this warning can result in death or in serious

injury.

Warning

Warns against a potentially dangerous situation.

• Failure to observe this warning can result in serious injury or

even death.

attention

Warns against a possible risk.

• Failure to observe this warning can result in substantial or minor

injuries.

note

Warns against material damage.

• Failure to observe this warning may result in damage to the

fitting or system.

Indicates additional information, advice or important

recommendations.

Refers to information contained in this manual or in other

documents.

→Indicates a procedure to be carried out.

1.2. Definition of the word "holder"

The word "holder" used within this manual refers to the hygienic

holder type 8200.

English

Intended use

Type 8200

2. INTENDED USE

Use of the hygienic holder that does not comply with the ins-

tructions could present risks to people, nearby installations

and the environment.

• The 8200 hygienic holder is intended for professional use in

process measurements technology, as a holder for probe with a

12 mm shaft diameter.

• Use the holder in compliance with the specifications and

conditions of commissioning and use given in the contractual

documents, in these operating instructions and in the operating

instructions for the device which is inserted into the holder.

• Safe and trouble-free operation of the holder depends on its

proper transport, storage and installation, as well as careful

operation and maintenance.

• Only use the holder as intended.

→Observe any existing restraints when the holder is exported.

3. BASIC SAFETY INFORMATION

This safety information does not take into account:

• any contingencies or occurences that may arise during installation,

use and maintenance of the devices.

• the local safety regulations for which the operating company is res-

ponsible including the staff in charge of installation and maintenance.

Danger due to high pressure in the installation.

Danger due to high temperatures of the fluid.

Danger due to the nature of the fluid.

Various dangerous situations

To avoid injury take care:

• Prevent any unintentional power supply switch-on.

• To ensure that installation and maintenance work are

carried out by qualified, authorised personnel in possession of

the appropriate tools.

• Use the holder only if in perfect working order and in compliance

with the instructions provided in the operating instructions.

• To replace defective parts immediately.

• Observe the general technical rules when installing and using

the holder.

• Not to fix, assemble or maintain the holder in explosive

atmospheres.

English

General information

Type 8200

Various dangerous situations

To avoid injury take care:

• not to use fluid that is incompatible with the materials from

which the holder is made.

• not to use the holder in an environment incompatible with the

materials from which it is made.

• not to subject the holder to mechanical loads (by placing

objects on top of it or by using it as a step, for example).

• not to paint the internal or external threaded parts.

note

The holder may be damaged by the fluid in contact with.

• Systematically check the chemical compatibility of the compo-

nent materials of the holder and the fluids likely to come into

contact with it (for example: alcohols, strong or concentrated

acids, aldehydes, alkaline compounds, esters, aliphatic com-

pounds, ketones, halogenated aromatics or hydrocarbons,

oxidants and chlorinated agents).

• Conctact with salty solutions and concentrated acids can result

in corrosion.

4. GENERAL INFORMATION

4.1. International contacts

You can contact your local Bürkert sales office.

The addresses of our international sales offices are available on the

internet at: www.burkert.com

4.2. Warranty conditions

The condition governing the legal warranty is the conforming use of

the 8200 hygienic holder in observance of the operating conditions

specified in these operating instructions.

4.3. Information on the Internet

You can find these operating instructions and technical data sheets

regarding the type 8200 at: www.burkert.com

English

Description

Type 8200

5. DESCRIPTION

5.1. Area of application

The 8200 hygienic holder is intended for professional use in process

measurements technology, as a holder for probe with a 12 mm

shaft diameter. Depending on the version, the hygienic holder can

either be installed on a weld-in socket with a diameter of 25 mm or

a clamp connection or a 2" (DN50/40) connection adapted for GEA

Tuchenhagen VARINLINE process connections.

5.2. Available versions

The hygienic holder is available in the following versions:

Process connection Specification Order code

G1¼” internal thread* O-ring position

(OP): 25 mm 562431

G1¼” internal thread*O-ring position

(OP): 50 mm 562432

2" (DN50/40) connection

adapted for GEA Tuchenhagen

VARINLINE process connections*

Inclination: 15° 562433

Clamp 1½”, (dia. 50.5 mm) Insertion lenght:

33 mm 558885

* The certificate 3.1 is supplied with the holder.

6. TECHNICAL DATA

6.1. Conditions of use

Fluid temperature 135°C max.

Temperature limits may depend on the

inserted probe. Refer to the relevant

operating instructions. If the temperature

ranges given for the holder and the

inserted probe are different, use the most

restrictive range.

Pressure class 6 bar max.

Pressure limits may depend on the

inserted probe. Refer to the relevant ope-

rating instructions. If the pressure ranges

given for the holder and the inserted

probe are different, use the most res-

trictive range.

6.2. Materials

Part Material

Body Stainless steel

O-ring EPDM (FDA agreement)

English

Technical data

Type 8200

6.3. Dimensions

Ø 24,97

Pg 13,5

E = H+26 F = 133-E

Fig. 1: Dimensions [mm] of a holder with G1¼” internal thread

15°

A 1

(27) 102

A 3

Pg 13.5

Ø 30

Ø 84

Fig. 2: Dimensions [mm] of a 2" (DN50/40) connection adapted

for GEA Tuchenhagen VARINLINE process connections

English

Installation, commissioning

Type 8200

Ø 24

Ø 30

Pg 13,5

33 98.5

117

Ø 50.5 (TC 1.5")

Fig. 3: Dimensions [mm] of a clamp holder

7. INSTALLATION, COMMISSIONING

7.1. Safety instructions

danger

Risk of injury due to high pressure in the installation.

• Stop the circulation of fluid, cut-off the pressure and drain the

pipe before loosening the process connections.

Risk of injury due to high fluid temperatures.

• Use safety gloves to handle the holder.

• Stop the circulation of fluid and drain the pipe before loosening

the process connections.

Risk of injury due to the nature of the fluid.

• Respect the prevailing regulations on accident prevention and

safety relating to the use of hazardous products.

Warning

Risk of injury due to non-conforming installation.

• Fluidic installation can only be carried out by qualified and

authorised personnel with the appropriate tools.

• Observe the installation instructions for the measuring device

inserted into the holder.

Risk of injury due to an uncontrolled restart.

• Ensure that the restart of the installation is controlled after any

interventions on it.

English

Installation, commissioning

Type 8200

Warning

Danger due to nonconforming commissioning.

Nonconforming commissioning may lead to injuries and damage

the holder and its surroundings.

• Before commissioning, make sure that the staff in charge have

read and fully understood the contents of the manual.

• In particular, observe the safety recommendations and intended

use.

• The installation must only be commissioned by suitably trained

staff.

Warning

Gases or liquids can leak out indetected through the seals or

the screws.

• Check regularly the holder for leaks.

Warning

Before initial operation of the holder or after a long out-of use

period:

• Ensure that the seal is tight.

• Ensure that all parts are in working order.

7.2. Assembling the probe

To avoid any mechanical damage to O-rings on assembly,

they should be lightly greased. After assembly, clean the

probe of any remaining drops of grease.

→Ensure there is no damage to the probe or the holder.

→Check that all o-rings are in place in their appropriate grooves,

and are free of damage.

7.3. Assembling the holder

→Check that the process connection is clean.

→Mount the holder and fix it in place.

→Screw the probe into the holder.

English

Otros manuales para 8200 Series

Tabla de contenidos

Idiomas:

Otros manuales de Instrumento de medición de Burkert

Burkert

Burkert 8222 ELEMENT NEUTRINO Manual de usuario

Burkert

Burkert 8020 Manual de usuario

Burkert

Burkert 8026 Manual de usuario

Burkert

Burkert 8045 Manual de usuario

Burkert

Burkert FLOWave L Manual de usuario

Burkert

Burkert 8201 Manual de usuario

Burkert

Burkert 8041 Manual de usuario

Burkert

Burkert FLOWave S Manual de usuario

Burkert

Burkert 8025 Series Manual de usuario

Burkert

Burkert 8756 Manual de usuario

Burkert

Burkert Flowave 8098 Manual de usuario

Burkert

Burkert 8228 ELEMENT neutrino Manual de usuario

Burkert

Burkert 8285 El. COND Manual de usuario

Burkert

Burkert 8228 ELEMENT Manual de usuario

Burkert

Burkert 8746 Manual de usuario

Burkert

Burkert 8202 ELEMENT Manual de usuario

Burkert

Burkert 8222 ELEMENT NEUTRINO Manual de usuario

Burkert

Burkert FLOWave L 8098 Manual de usuario

Burkert

Burkert ELEMENT neutrino 8202 Manual de usuario

Burkert

Burkert FLOWave S 8098 Manual de usuario

Burkert

Burkert 8743 Manual de usuario

Burkert

Burkert SE30 Ex Namur Manual de usuario

Burkert

Burkert 8026 Manual de usuario

Burkert

Burkert 8232 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario