Brother PEDESIGN PLUS Manual de usuario

Operation Manual

PERSONAL EMBROIDERY DESIGN SOFTWARE SYSTEM

Please visit us at http://solutions.brother.com where you can get product

support and answers to frequently asked questions (FAQs).

English

Printed in China

XF0606-001

PED_PLUS_BrotherE_OM_cover_1-4 C M Y K

IMPORTANT INFORMATION: REGULATIONS

Federal Communications Commissions (FCC) Declaration of Conformity

(For USA Only)

Responsible Party: Brother International Corporation

100 Somerset Corporate Boulevard

Bridgewater, NJ 08807-0911 USA

declares that the product

Product Name: Brother USB Writer

Model Number: PE-Design

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Consult the dealer or an experienced radio/TV technician for help.

– Changes or modifications not expressly approved by the manufacturer or local sales

distributor could void the user’s authority to operate the equipment.

Canadian Department of Communications Compliance Statement

(For Canada Only)

This Class B digital apparatus complies with Canadian ICES-003.

Radio Interference

(Other than USA and Canada)

This machine complies with EN55022 (CISPR Publication 22) /Class B.

XE8656-001.book Page 0 Thursday, June 30, 2011 2:56 PM

Read the following before opening the

CD-ROM package

Thank you for purchasing this software. Before opening the CD-ROM package for this software, carefully read

the following Product Agreement, which has been provided for this product. Use this software only if you agree

to the terms of this agreement. By opening the CD-ROM package, you agree to the conditions of its use. This

product cannot be returned after it has been opened.

Product Agreement

Portions of this product were created using technology from Softfoundry International Pte. Ltd.

■Opening the Operation Manual (PDF format)

This manual is provided in a PDF format on the enclosed CD-ROM. The Operation Manual is also installed

during software installation.

Click All Programs, then PE-DESIGN PLUS, then Operation Manual.

Otherwise, with PE-DESIGN PLUS, click , then Operation Manual. With PES-Writer, click Help, then

Operation Manual.

1) General terms

This is an agreement between you (the end-user) and our company for this product.

2) Use of this product

You may install and use this product on only one computer.

3) Limitations on duplications

You may not duplicate this product, except for backup purposes.

4) Limitations on modifications

You may not modify or disassemble this product in any way.

5) Limitations on transfer

This software may not be transferred to or used in any other way by a third party.

6) Warranty

We accept no responsibility for your choice or use of this product or for any damages that may arise

out of its use.

7) Others

This product is protected by copyright laws.

bMemo:

• Adobe®Reader®is required for viewing and printing the PDF version of the Operation Manual

• If Adobe®Reader®is not on your computer, it must be installed. It can be downloaded from the Adobe

Systems Incorporated Web site (http://www.adobe.com/).

• The procedures in this manual are written for use in Windows®7. If this software is used on an operating

system other than Windows®7, the procedures and appearance of the windows may differ slightly.

Information.fm Page 1 Wednesday, July 6, 2011 3:34 PM

Congratulations on choosing our product!

Thank you very much for purchasing our product. To obtain the best performance from this unit and

to ensure safe and correct operation, please read this Operation Manual carefully, and then keep

it in a safe place together with your warranty.

Please read before using this product

For designing beautiful embroidery designs

• This system allows you to create a wide variety of embroidery designs and supports a wider

range of sewing attribute settings (thread density, sewing pitch, etc.). However, the final result

will depend on your particular sewing machine model. We recommend that you make a trial

sewing sample with your sewing data before sewing on the final material.

For safe operation

• Avoid dropping a needle, a piece of wire or other metallic objects into the unit or into the card

slot.

• Do not store anything on the unit.

For a longer service life

• When storing the unit, avoid direct sunlight and high humidity locations. Do not store the unit

close to a heater, iron or other hot objects.

• Do not spill water or other liquids on the unit or cards.

• Do not drop or hit the unit.

For repairs or adjustments

• In the event that a malfunction occurs or adjustment is required, please consult your nearest

service center.

Notice

This Operation Manual does not explain how to use your computer under Windows®. Please refer

to the Windows®manuals.

Windows®is a registered trademark of Microsoft Corporation. Other product names mentioned in

the Operation Manual may be trademarks of registered trademarks of their respective companies

and are hereby acknowledged.

Important

Using this unit for unauthorized copying of material from embroidery cards, newspapers and

magazines for commercial purpose is an infringement of copyrights which is punishable by law.

Caution

The software included with this product is protected by copyright laws. This software can be used

or copied only in accordance with the copyright laws.

For additional product information and updates, visit our web site at:

http://www.brother.com/ or http://solutions.brother.com/

SAVE THESE INSTRUCTIONS

This product is intended for household use.

XE8656-001.book Page 2 Thursday, June 30, 2011 2:56 PM

Table of Contents

Before Use........................................4

Before Use ............................................... 4

Introduction................................................... 4

Installation.....................................................5

Creating Embroidery Patterns......10

Getting Started ...................................... 10

Starting Up Application ...............................10

Creating Embroidery Patterns From Photos

(Photo Stitch 1)...........................................11

Saving.........................................................18

Exiting Application ......................................19

Image To Stitch ..................................... 21

Photo Stitch 2 .............................................21

Auto Punch .................................................24

Cross Stitch ................................................27

Common dialog boxes ................................30

Entering Text ......................................... 32

Entering Text ..............................................32

Advanced Operations for Entering Text......35

Arranging Embroidery Designs ...37

Arranging Embroidery Designs........... 37

Editing Embroidery Designs .......................37

Checking Embroidery Patterns ................... 40

Applying Sewing Attributes to Lines and

Regions....................................................... 45

Opening/Importing Embroidery Designs..... 48

Transferring Embroidery Designs to

Machines ....................................................52

Printing........................................................54

Specifying the Design Page Size and

Color ...........................................................56

Changing Application Settings....................57

Supplement....................................61

Understanding Windows ...................... 61

PE-DESIGN PLUS Window ........................61

Menus .........................................................65

Tips and Techniques............................. 67

Sewing Direction .........................................67

Sewing Order ..............................................67

Sewing Wide Areas.....................................67

Reference ............................................... 68

Sewing Attributes ........................................68

Font List ......................................................70

PES-Writer.............................................. 72

Writing Multiple Embroidery Files to an

Original Card...............................................72

Troubleshooting .................................... 75

Index ...............................................76

XE8656-001.book Page 3 Thursday, June 30, 2011 2:56 PM

Before Use Before Use

Introduction

Package Contents

Check that the following items are included. If anything is missing or damaged, contact your authorized dealer

or Brother Customer Service.

aLED indicator

This indicator lights up when the unit is turned on, and flashes when the USB Card Writer Module is

communicating with the computer.

bCard slot

Insert an original card/embroidery card here.

cUSB connector

Connect to the computer.

USB Card Writer Module CD-ROM Original card Operation Manual

Contains the software

and Operation Manual

(PDF format).

aNote:

• The only original cards that can be used with this USB Card Writer Module are those like the one

enclosed or optional original cards of the same type.

• Never remove an original card or unplug the USB cable while this indicator is flashing.

bMemo:

• Since power is supplied to the USB Card Writer Module through the USB connection to the

computer, there is no power supply cable or power switch.

• Be sure to keep original cards away from high humidity, direct sunlight, static electricity and strong

shocks. Furthermore, do not bend the cards.

Optional Supply

Additional blank original cards can be purchased through an authorized dealer.

Original card

XE8656-001.book Page 4 Thursday, June 30, 2011 2:56 PM

Before Use

Installation

Please Read Before Installation

●Before beginning the installation, check that the computer meets the system requirements.

●In order to install the software on Windows®Operating System, you must log on to the computer using an

account with administrator privileges. For details on logging on to the computer using an account with

administrator privileges, refer to the Windows®manual.

●The installation procedure is described for Windows®7. The procedure and dialog boxes for other

operating systems may be slightly different.

●If the installation is canceled before it is completed or if the procedure is not performed as described, the

software will not be installed correctly.

●Do not remove the CD-ROM from the CD-ROM drive of the computer while the installation is being

performed. Remove the CD-ROM after the installation is completed.

●Before turning on the computer, be sure to disconnect the USB Card Writer Module.

System Requirements

Before installing the software on your computer, make sure that the computer meets the following minimum

PC requirements.

Computer IBM-PC or compatible computer

Operating system Windows®XP, Windows Vista®, Windows®7 (32 or 64 bit)

Processor 1GHz or higher

Memory 512MB (1GB or more is recommended.)

Hard disk free space 200MB

Monitor XGA (1024 x 768), 16-bit color or higher

Port 1 available USB

Printer A graphic printer that is supported by your system

(if you wish to print your images)

CD-ROM drive Required for installation

Internet access Required for update

aNote:

• Power is supplied to the USB Card Writer Module through the USB connection. Connect the USB

Card Writer Module to a USB connector on the computer or to a self-powered USB hub that can

supply enough power to the Card Writer Module. If the Card Writer Module is not connected in this

way, it may not operate correctly.

• This product may not operate correctly with some computers and USB expansion cards.

XE8656-001.book Page 5 Thursday, June 30, 2011 2:56 PM

Before Use

Installing the Software

This section describes how to install the application

software.

1. Insert the enclosed CD-ROM into the

computer's CD-ROM drive.

■Windows®XP users only

After a short while, the language selection

dialog box for InstallShield Wizard

automatically appears.

Continue with step 4. on page 7.

■For Windows®7 or Windows

Vista®users:

After a short while, the AutoPlay dialog

box automatically appears.

aNote:

• If the installation is interrupted or not

performed as described, the software

will not be installed correctly.

• Before turning on the computer, be sure

that the USB Card Writer Module is

DISCONNECTED.

• In order to install the software, you must

log on to the computer using an account

with administrator privileges. If you are

not logged on with the Administrator

account, the password for the

Administrator account (Administrators)

may be requested with Windows®7.

Type in the password to continue the

procedure.

bMemo:

If the installer does not automatically start

up:

1) Click the Start button.

2) Click Run.

The Run dialog box appears.

3) Type in the full path to the installer, and

then click OK to start up the installer.

For example: F:\setup.exe (where "F:" is

the name of the CD-ROM drive)

bMemo:

If the

AutoPlay

Dialog does not automatically

start up:

1) Click the Start button.

2) Click All Programs



Accessories



Run.

The Run dialog box appears.

3) Type in the full path to the installer, and

then click OK to start up the installer.

For example: F:\setup.exe (where “F:” is

the name of the CD-ROM drive)

XE8656-001.book Page 6 Thursday, June 30, 2011 2:56 PM

Before Use

2. Click Run setup.exe.

The User Account Control dialog box

appears.

3. Click Yes.

After a short while, the following dialog

box automatically appears.

4. Select the desired language, and then click

OK.

The InstallShield Wizard starts up, and

the first dialog box appears.

5. Click Next to continue with the installation.

A dialog box appears, allowing you to

select the folder where the software will

be installed.

6. Check the installation location, and then click

Next.

A dialog box appears, indicating that

preparations for installation are finished.

7. Click Install to install the application.

When the installation is completed, the

following dialog box appears.

bMemo:

To install the application into a different

folder:

1) Click Change.

2) In the Change Current Destination

Folder dialog box that appeared, select

the drive and folder. (If necessary, type

in the name of a new folder.)

3) Click OK.

The Destination Folder dialog box of

the InstallShield Wizard shows the

selected folder.

4) Click Next to install the application into

the selected folder.

XE8656-001.book Page 7 Thursday, June 30, 2011 2:56 PM

Before Use

8. Click Finish to complete the installation of the

software. Checking for the Latest

Version of the Program

Click in PE-DESIGN PLUS, then Check for

Updates.

The software is checked to determine whether or

not it is the latest version.

If the message shown below appears, the latest

version of the software is being used.

If the message shown below appears, the latest

version of the software is not being used. Click Yes,

and then download the latest version of the software

from the Web site.

aNote:

This procedure also automatically installs

the card writer driver. The card writer may

now be connected to your computer.

Make sure that PE-DESIGN PLUS starts

up correctly.

bMemo:

If the dialog box calling for restarting the

computer appears, it is necessary to restart

the computer.

aNote:

• This feature cannot be used if the

computer is not connected to the

Internet.

• It may not be possible to check for the

latest version if a firewall is turned on.

Turn off the firewall, and then try

performing the operation again.

• Administrator privileges are required.

bMemo:

If the

Always check for most recent version

at startup

check box is selected, the software

is checked at startup to determine whether or

not it is the latest version.

PE-DESIGN_Plus.fm Page 8 Wednesday, July 6, 2011 3:35 PM

Otros manuales para PEDESIGN PLUS

Tabla de contenidos

Otros manuales de Software de Brother

Brother

Brother BES Monogramming Suite Manual de usuario

Brother

Brother PEDESIGNNEXT Manual de lista de piezas

Brother

Brother DCP-8110DN Manual de usuario

Brother

Brother RuggedJet RJ-4030 Instrucciones de montaje

Brother

Brother DCP-130C Guía de seguridad

Brother

Brother BES-100E Instrucciones de operación

Brother

Brother HL-720 Manual de usuario

Brother

Brother PEDESIGN PLUS Manual de usuario

Brother

Brother BES Lettering Manual de usuario

Brother

Brother Pacesetter Embroidery Lettering Manual de usuario

Brother

Brother PEDESIGN 5.0 Manual de usuario

Brother

Brother MacBroidery„ Embroidery Lettering Software for... Manual de usuario

Brother

Brother PE-DESIGN V7 Manual de usuario

Brother

Brother MacBroidery„ Embroidery Lettering Software for... Manual de usuario

Brother

Brother DCP-375CW Manual de usuario

Brother

Brother PocketJet 6 Plus Print Engine Manual de usuario

Brother

Brother iPrint & Scan Guide Manual de usuario

Brother

Brother print server Manual de usuario

Brother

Brother PE-Design Next Manual de usuario

Brother

Brother ImageCenter ADS-2000 Manual de usuario

Brother

Brother BES Lettering Manual de usuario

Brother

Brother Quattro 6000D Guía de configuración

Brother

Brother RuggedJet RJ-4030 Instrucciones de montaje

Brother

Brother PED-BASIC Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario