Brocade Communications Systems SilkWorm 3800 Guía rápida de usuario

Publication Number 53-0001576-06

SilkWorm® 3800

Hardware Reference Manual

BROCADE, the Brocade B weave logo, Brocade: the Intelligent Platform for Networking Storage, SilkWorm, and

SilkWorm Express, are trademarks or registered trademarks of Brocade Communications Systems, Inc. or its

subsidiaries in the United States and/or in other countries. All other brands, products, or service names are or may be

trademarks or service marks of, and are used to identify, products or services of their respective owners.

Notice: The information in this document is provided “AS IS,” without warranty of any kind, including, without

limitation, any implied warranty of merchantability, noninfringement or fitness for a particular purpose. Disclosure of

information in this material in no way grants a recipient any rights under Brocade's patents, copyrights, trade secrets or

other intellectual property rights. Brocade reserves the right to make changes to this document at any time, without

notice, and assumes no responsibility for its use.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity

with respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer

programs that accompany it.

Notice: The product described by this document may contain “open source” software covered by the GNU General

Public License or other open source license agreements. To find-out which open source software is included in Brocade

products, view the licensing terms applicable to the open source software, and obtain a copy of the programming source

code, please visit http://www.brocade.com/support/oscd.

Export of technical data contained in this document may require an export license from the United States Government.

Corporate Headquarters

Brocade Communications Systems,

Incorporated

1745 Technology Drive

San Jose, CA 95110

U.S.A.

T: (408) 487-8000

F: (408) 487-8101

info@brocade.com

European Headquarters

Brocade Communications

Switzerland Sàrl

29, route de l’Aéroport

Case Postale 105

1215 Genève 15,

Switzerland

T: +41 22 799 56 40

F: +41 22 799 56 41

europe-info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Systems

K.K.

The Imperial Tower 15th Floor

1-1-1 Uchisaiwaicho

Chiyoda-ku, Tokyo 100-0011

Japan

T: +81 33507 5802

F: +81 33507 5900

apac-info@brocade.com

SilkWorm 3800 Hardware Reference iii

Contents

Preface

Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

What’s New in This Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Use of Notes, Cautions, and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . vi

Related Publications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Chapter 1 Introducing the SilkWorm 3800

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Port Side of the SilkWorm 3800. . . . . . . . . . . . . . . . . . . . . . 1-2

Non-Port Side of the SilkWorm 3800. . . . . . . . . . . . . . . . . . 1-2

Monitoring and Managing the SilkWorm 3800 . . . . . . . . . . . . . . . . . . . 1-3

Chapter 2 Installing and Configuring the SilkWorm 3800

Installation and Safety Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Items Included With the SilkWorm 3800 . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Setting Up the SilkWorm 3800 as a Stand-alone Unit . . . . . . . . . . . . . . 2-2

Installing the SilkWorm 3800 in an EIA Cabinet. . . . . . . . . . . . . . . . . . 2-3

Configuring the SilkWorm 3800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Recommendations for Cable Management. . . . . . . . . . . . . . . . . . . . . . . 2-15

Chapter 3 Operating the SilkWorm 3800

Powering the SilkWorm 3800 On and Off . . . . . . . . . . . . . . . . . . . . . . . 3-1

Interpreting LED Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

LEDs On the Port Side of the Switch. . . . . . . . . . . . . . . . . . 3-2

LEDs On the Non-Port Side of the Switch. . . . . . . . . . . . . . 3-4

iv SilkWorm 3800 Hardware Reference

Interpreting POST Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Maintaining the SilkWorm 3800. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Appendix A Product Specifications

Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Weight and Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Facility Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Data Transmission Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Memory Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Fibre Channel Port Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Serial Port Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

POST and Boot Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

FCC Warning (USA only) . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

VCCI Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

CE Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Canadian Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Laser Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

RTC Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

Regulatory Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

Glossary

Index

SilkWorm 3800 Hardware Reference v

Preface

Intended Audience

This document is intended for use by systems administrators and technicians experienced with

networking, fibre channel, and storage area network (SAN) technologies.

What’s New in This Book

Changes in 53-0001576-06

The following changes have been made since the last release of this book, 53-0001576-05:

•The name of the “Switch Power LED” has been changed to “Switch Power/Status LED”.

•Preface:

-Updated Technical Support information.

-Added formatting conventions.

•Installation chapter:

-Added rack kit procedure.

-Modified configuration procedure.

-Airflow changed to 25 cubic feet per minute (previously linear feet per minute)

-Added recommendations for cable management.

-Default IP address information updated to reflect the current defaults being

programmed at the factory.

•Additions to product specifications:

-Power Supply Specifications - Changed input voltage to 100 - 240 VAC (nominal

80% efficiency).

-Added two EMI classifications -CNS13438 and ICES-003 Class A.

-Added table of Data Transmission Ranges.

-Added list of switch boot steps.

vi SilkWorm 3800 Hardware Reference

Formatting Conventions

The following table describes the formatting conventions that are used in this book.

Use of Notes, Cautions, and Warnings

The following notices are used in this document:

Note: A note provides a tip, emphasizes important information, or provides a reference to

related information.

Convention Purpose

bold text •identifies command names

•identifies GUI elements

•identifies keywords/operands

•identifies text that you must enter at the GUI or CLI

italic text •provides emphasis

•identifies variables

•identifies paths and Web addresses

•identifies book titles

code text •identifies CLI output

•identifies syntax examples

Caution A caution alerts you to potential damage to hardware, firmware,

software, or data if the correct procedure is not followed.

Warning A warning alerts you to potential danger to personnel if the correct

procedure is not followed.

SilkWorm 3800 Hardware Reference vii

Related Publications

Brocade Documentation

Related product information can be found in the following publications:

•Additional hardware documentation:

-SilkWorm 3800®QuickStart Guide (provided as hard copy with switch)

•Fabric OS documentation:

-Brocade Fabric OS Procedures Guide

-Brocade Fabric OS Reference

-Brocade Fabric OS Release Notes

-Brocade Diagnostic and System Error Message Reference

-Brocade MIB Reference

•Fabric Manager documentation:

-Brocade Fabric Manager

-Brocade Fabric Manager Release Notes

•Documentation for Fabric OS optional software:

-Brocade Advanced Zoning User’s Guide

-Brocade ISL Trunking User’s Guide

-Brocade Advanced Web Tools User’s Guide

-Brocade Advanced Performance Monitoring User’s Guide

-Brocade Distributed Fabrics User’s Guide (covers Remote Switch and Extended

Fabrics)

-Brocade Fabric Watch User’s Guide

-Brocade QuickLoop User’s Guide

-Brocade SES User’s Guide

Additional Information

For additional Brocade documentation, including white papers, visit the Brocade website at:

http://www.brocade.com

For information about Fibre Channel standards, visit the Technical Committee T11 website at:

http://www.t11.org

For information about the Fibre Channel industry, visit the Fibre Channel Industry Association

website at:

http://www.fibrechannel.com

viii SilkWorm 3800 Hardware Reference

Technical Support

Contact your switch supplier for hardware, firmware, and software support, including product

repairs and part ordering.

Be prepared to provide the information described in this section to support personnel.

Note: This section provides information for all types of SilkWorm switches.

•General Information

-Technical Support registration number, if applicable

-Switch model

-Operating system version

-Error messages received

-Output from the supportshow command

-Fabric topology, provided by the topologyshow command

-Detailed description of the problem and specific questions

-Description of any troubleshooting steps already performed and results

•Switch Serial Number

The switch serial number and corresponding bar code are provided on the serial number

label, as shown below:

The serial number label is located as follows:

-On SilkWorm 2000 series switches: Bottom of chassis

-On SilkWorm 3000 series switches: Back of chassis

-On SilkWorm 6400 and 12000 switches: Inside chassis, on wall to left of ports

•Switch Worldwide Name

-SilkWorm 12000 switches: The chassis WWN is available through the wwn

command.

-For all switches other than the SilkWorm 12000: The switch WWN is available

through the switchshow and wwn commands.

FT00X0054E9

SilkWorm 3800 Hardware Reference 1-1

Introducing the SilkWorm 3800

This chapter provides the following information:

•Overview on page 1-1

•Monitoring and Managing the SilkWorm 3800 on page 1-3

Overview

The SilkWorm 3800 is a 16-port fibre channel gigabit switch that supports link speeds up to

2 Gbit/sec. It includes the Brocade Fabric Operating System, and is compatible with the entire

SilkWorm product family. It can operate in a fabric containing multiple switches or as the only

switch in a fabric.

The SilkWorm 3800 provides the following features:

•Air-cooled 1U chassis that can be set up as a stand-alone unit or mounted in a standard

Electronic Industries Association (EIA) 19-inch cabinet.

•16 fibre channel ports, with the following characteristics:

-Automatic negotiation to the highest common speed of all devices connected to

port

-Port interfaces compatible with small form factor pluggable (SFP) transceivers,

both short wavelength (SWL) and long wavelength (LWL)

-Universal and self-configuring: capable of becoming an F_Port (fabric enabled),

FL_Port (fabric loop enabled), or E_Port (expansion port)

•16 short-wave length SFP transceivers, if ordered

•One RS-232 serial port, designed to connect to a DTE port.

•One 10/100 Mbps ethernet port with an RJ-45 connector

•One or two power supplies, as ordered, with built-in fans (if two power supplies are

installed, they are redundant and individually hot-swappable)

•Two fan assemblies, hot-swappable if replaced one at a time.

•A field-replaceable motherboard assembly enclosed in a grounded EMI cage

•The following LEDs:

-Switch Power/Status LED (light-emitting diode) on the port side of the switch

-Port Readiness LED on the non-port side of the switch

-Port Status LED and Port Speed LED for each port

-Power LED on each power supply

1-2 SilkWorm 3800 Hardware Reference

Introducing the SilkWorm 3800

Port Side of the SilkWorm 3800

Figure 1-1 shows the port side of the SilkWorm 3800. IP label, fibre channel ports

Figure 1-1 Port Side of SilkWorm 3800

The fibre channel ports are numbered from left to right, and are color-coded into groups of four to

indicate which ports can be used in the same interswitch link (ISL) trunking group.

Note: Brocade ISL Trunking is optional software that allows creation of trunking groups of

ISLs between adjacent switches. For more information about trunking, refer to the

Brocade ISL Trunking User’s Guide

Non-Port Side of the SilkWorm 3800

Figure 1-2 shows the non-port side of the SilkWorm 3800, which provides access to the fan

assemblies, power supplies, and Port Readiness LED. Each power supply also has an LED that

indicates whether the power supply is receiving power.

Figure 1-2 Non-Port Side of SilkWorm 3800

Switch Power/Status LED

Serial Port Fibre Channel Port (16x)

Ethernet Port

Port Readiness LED

Power Supply #2 Fan Assembly Power Supply #1

Fan Assembly

(contains fans #3 and 4)

(contains fans #1 and 2)

Otros manuales para SilkWorm 3800

Tabla de contenidos

Otros manuales de Cambiar de Brocade Communications Systems

Brocade Communications Systems

Brocade Communications Systems FastIron FGS624P Manual

Brocade Communications Systems

Brocade Communications Systems 7500 Extension Guía rápida de usuario

Brocade Communications Systems

Brocade Communications Systems VDX 6720 Manual de usuario

Brocade Communications Systems

Brocade Communications Systems VDX 8770-8 Guía rápida de usuario

Brocade Communications Systems

Brocade Communications Systems DCX 8510-4 Guía rápida de usuario

Brocade Communications Systems

Brocade Communications Systems AM866A - StorageWorks 8/8 Base SAN Switch Manual de servicio

Brocade Communications Systems

Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual de servicio

Brocade Communications Systems

Brocade Communications Systems 8Gb SAN Switch Instrucciones de uso

Brocade Communications Systems

Brocade Communications Systems 5300 Manual

Brocade Communications Systems

Brocade Communications Systems ICX 6430-C Manual de usuario

Brocade Communications Systems

Brocade Communications Systems VDX 6940 Series Manual

Brocade Communications Systems

Brocade Communications Systems 6910 Manual de usuario

Brocade Communications Systems

Brocade Communications Systems NetIron CES Series Instrucciones de instalación

Brocade Communications Systems

Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual de servicio

Brocade Communications Systems

Brocade Communications Systems SilkWorm 3900 Manual de usuario

Brocade Communications Systems

Brocade Communications Systems Encryption Switch Manual de uso y cuidado

Brocade Communications Systems

Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual de servicio

Brocade Communications Systems

Brocade Communications Systems VDX 6940 Series Manual

Brocade Communications Systems

Brocade Communications Systems ServerIron ADX 12.4.00 Instrucciones de montaje

Brocade Communications Systems

Brocade Communications Systems Brocade 6510 Manual de instrucciones

Brocade Communications Systems

Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual de usuario

Brocade Communications Systems

Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual de instalación

Brocade Communications Systems

Brocade Communications Systems VDX 8770-4 Manual

Brocade Communications Systems

Brocade Communications Systems 6505 Manual de servicio

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario