Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual de servicio

53-1000607-02

March 12, 2008

EZSwitchSetup

Administrator’s Guide

Supporting Fabric OS v6.1.0

Supporting Brocade 200E, 300, 4100, 4900, 5000, 5100, 5300

Brocade, the Brocade B weave logo, Fabric OS, File Lifecycle Manager, MyView, Secure Fabric OS, SilkWorm, and StorageX are

registered trademarks and the Brocade B wing logo and Tapestry are trademarks of Brocade Communications Systems, Inc., in

the United States and/or in other countries. FICON is a registered trademark of IBM Corporation in the U.S. and other countries.

All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify, products or

services of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning

any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to

this document at any time, without notice, and assumes no responsibility for its use. This informational document describes

features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.

Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with

respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that

accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other

open source license agreements. To find-out which open source software is included in Brocade products, view the licensing

terms applicable to the open source software, and obtain a copy of the programming source code, please visit http://

www.brocade.com/support/oscd.

EZSwitchSetup Administrator’s Guide

53-1000607-02

Brocade Communications Systems, Incorporated

Document History

The following table lists all versions of the EZSwitchSetup Administrator’s Guide.

Corporate Headquarters

Brocade Communications Systems, Inc.

1745 Technology Drive

San Jose, CA 95110

Tel: 1-408-333-8000

Fax: 1-408-333-8101

Email: info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Singapore Pte. Ltd.

9 Raffles Place

#59-02 Republic Plaza 1

Singapore 048619

Tel: +65-6538-4700

Fax: +65-6538-0302

Email: [email protected]

European and Latin American Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour A - 2ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 56 40

Fax: +41 22 799 56 41

Email: [email protected]

Document Title Publication Number Summary of Changes Publication Date

EZSwitchSetup Administrator’s Guide 53-1000121-01 First release January 2006

EZSwitchSetup Administrator’s Guide 53-1000195-01 Changes to support Fabric OS

v5.2.0, including zoning and port

activation

September 2006

EZSwitchSetup Administrator’s Guide 53-1000195-02 Added Brocade 5000 switch

support

February 2007

EZSwitchSetup Administrator’s Guide 53-1000441-01 Added Brocade 4900 switch

support; Added DHCP and IPv6

support

June 2007

EZSwitchSetup Administrator’s Guide 53-1000607-01 Added enhanced switch setup October 2007

EZSwitchSetup Administrator’s Guide 53-1000607-02 Added support for new hardware:

Brocade 300, Brocade 5100, and

Brocade 5300.

March 2008

EZSwitchSetup Administrator’s Guide iii

53-1000607-02

Contents

About This Document

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Supported Hardware and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

What’s New in This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Document Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Chapter 1 Introducing EZSwitchSetup

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Overview of EZSwitchSetup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

EZSwitchSetup software and hardware requirements. . . . . . . . . . . . 2

Configuring Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Supported switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Language support for EZSwitchSetup . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2 Setting Up Your Switch

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing and running the EZSwitchSetup wizard. . . . . . . . . . . . . . . . 5

Launching the EZSwitchSetup wizard . . . . . . . . . . . . . . . . . . . . . 6

Powering up and connecting cables to the switch . . . . . . . . . . . . . . . 7

Powering up and connecting cables for serial setup. . . . . . . . . . 7

Powering up and connecting the cable for Ethernet setup. . . . . 9

Setting the switch IP address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting up the switch IP addresses using a serial connection . 10

Setting the switch IP addresses using an Ethernet connection11

Switch discovery failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Configuring the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Setting switch parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

iv EZSwitchSetup Administrator’s Guide

53-1000607-02

Selecting zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Configuring zones on the switch . . . . . . . . . . . . . . . . . . . . . . . . . 17

Specifying devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting devices and completing the setup . . . . . . . . . . . . . . . . . 18

Connecting devices and completing the setup . . . . . . . . . . . . . 19

Chapter 3 Managing Your Switch

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

About the switch manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Task panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Switch View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Content page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Launching the EZSwitchSetup switch manager . . . . . . . . . . . . . . . .26

Logging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Logging out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Switch manager sessions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Managing the switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Switch view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Port status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Detailed switch information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Changing switch information. . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Enable inactive ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Managing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Device connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Assigning and renaming device aliases . . . . . . . . . . . . . . . . . . .36

Managing zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Choosing a zoning configuration. . . . . . . . . . . . . . . . . . . . . . . . .38

Editing zoning configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Validating zoning configuration. . . . . . . . . . . . . . . . . . . . . . . . . .40

Restoring Typical Zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Accessing Web Tools for advanced management. . . . . . . . . . . . . . . 41

Appendix A EZSwitchSetup Limitations

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

General limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Index

EZSwitchSetup Administrator’s Guide v

53-1000607-02

About This Document

In this chapter

•How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

•Supported Hardware and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

•What’s New in This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

•Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

•Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

•Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

•Document Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

How this document is organized

This document contains the following components:

•Chapter 1, “Introducing EZSwitchSetup”, provides some basic information about the

EZSwitchSetup interface, including system requirements and installation instructions.

•Chapter 2, “Setting Up Your Switch”, describes how to set up your switch for the first time.

•Chapter 3, “Managing Your Switch”, describes how to monitor and manage your switch using

the EZSwitchSetup Switch Manager.

•Appendix A, “EZSwitchSetup Limitations”, discusses the limitations of and provides

workarounds for using EZSwitchSetup.

vi EZSwitchSetup Administrator’s Guide

53-1000607-02

Supported Hardware and Software

This document supports the following platforms:

•Brocade 200E switch

•Brocade 300 switch

•Brocade 4100 switch

•Brocade 4900 switch

•Brocade 5000 switch

•Brocade 5100 switch

•Brocade 5300 switch

In those instances in which procedures or parts of procedures documented here apply to some

switches but not to others, this guide identifies exactly which switches are supported and which are

not.

Although many different software and hardware configurations are tested and supported by

Brocade Communications Systems, Inc. for Fabric OS 6.1.0, documenting all possible

configurations and scenarios is beyond the scope of this document; however, this document does

specify when procedures or parts of procedures apply only to specific switches.

This document does not support all Fabric OS versions. This document is specific to Fabric OS

6.1.0. To obtain information about an OS version other than 6.1.0, see the documentation specific

to that OS version.

What’s New in This Document

The following changes have been made since this document was last released:

•Added support for new Brocade switches: 300, 5100, 5300.

EZSwitchSetup Administrator’s Guide vii

53-1000607-02

Document Conventions

This section describes text formatting conventions and important notices formats.

Text Formatting

The narrative-text formatting conventions that are used in this document are as follows:

bold text Identifies command names

Identifies the names of user-manipulated GUI elements

Identifies keywords and operands

Identifies text to enter at the GUI or CLI

italic text Provides emphasis

Identifies variables

Identifies paths and Internet addresses

Identifies document titles

code text Identifies CLI output

Identifies syntax examples

For readability, command names in the narrative portions of this guide are presented in mixed

lettercase: for example, switchShow. In actual examples, command lettercase is often all

lowercase. Otherwise, this manual specifically notes those cases in which a command is case

sensitive.

Notes, Cautions, and Warnings

The following notices appear in this document.

NOTE

A note provides a tip, emphasizes important information, or provides a reference to related

information.A note provides a tip, guidance or advice, emphasizes important information, or

provides a reference to related information.

ATTENTION

An Attention statement indicates potential damage to hardware or data.

CAUTION

A Caution statement alerts you to situations that can be potentially hazardous to you.

DANGER

A Danger statement indicates conditions or situations that can be potentially lethal or extremely

hazardous to you. Safety labels are also attached directly to products to warn of these conditions

or situations.

viii EZSwitchSetup Administrator’s Guide

53-1000607-02

Key terms

For definitions specific to Brocade and Fibre Channel, see the Brocade Glossary.

For definitions of SAN-specific terms, visit the Storage Networking Industry Association online

dictionary at http://www.snia.org/education/dictionary.

Additional Information

This section lists additional Brocade and industry-specific documentation that you might find

helpful.

Brocade resources

To get up-to-the-minute information, join Brocade Connect. It’s free! Go to http://www.brocade.com

and click Brocade Connect to register at no cost for a user ID and password.

For practical discussions about SAN design, implementation, and maintenance, you can obtain

Building SANs with Brocade Fabric Switches through:

http://www.amazon.com

For additional Brocade documentation, visit the Brocade SAN Info Center and click the Resource

Library location:

http://www.brocade.com

Release notes are available on the Brocade Connect Web site and are also bundled with the Fabric

OS firmware.

Other industry resources

•White papers, online demos, and data sheets are available through the Brocade Web site at

http://www.brocade.com/products/software.jhtml.

•Best practice guides, white papers, data sheets, and other documentation is available through

the Brocade Partner Web site.

For additional resource information, visit the Technical Committee T11 Web site. This Web site

provides interface standards for high-performance and mass storage applications for Fibre

Channel, storage management, and other applications:

http://www.t11.org

For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web

site:

http://www.fibrechannel.org

EZSwitchSetup Administrator’s Guide ix

53-1000607-02

Getting technical help

Contact your switch support supplier for hardware, firmware, and software support, including

product repairs and part ordering. To expedite your call, have the following information available:

1. General Information

•Switch model

•Fabric OS version

•Browser and Java Plug-in version

•Error numbers and messages received

•Java console window messages

•Screen shots

•supportSave command output

•Detailed description of the problem, switch or fabric behavior immediately following

problem, and specific questions

•Description of any troubleshooting steps already performed and results

2. Switch Serial Number

The switch serial number and corresponding bar code are provided on the serial number label,

as shown here:

The serial number label is located as follows:

•Brocade 200E switches: On the nonport side of the chassis

•Brocade 300, 4100, 4900, 5000, and 5100 switches: On the switch ID pull-out tab

located on the bottom of the port side of the switch.

3. World Wide Name (WWN)

•Brocade 200E switches: On the nonport side of the chassis

•Brocade 4100, 4900, and 5000 switches: On the switch ID pull-out tab located on the

bottom of the port side of the switch.

Document Feedback

Because quality is our first concern at Brocade, we have made every effort to ensure the accuracy

and completeness of this document. However, if you find an error or an omission, or you think that

a topic needs further development, we want to hear from you. Forward your feedback to:

documentation@brocade.com

Provide the title and version number of the document and as much detail as possible about your

comment, including the topic heading and page number and your suggestions for improvement.

*FT00X0054E9*

FT00X0054E9

Otros manuales para A7533A - Brocade 4Gb SAN Switch Base

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Brocade Communications Systems