Bremont WATERMAN LIMITED EDITION Hoja de especificaciones
BREMONT WATERMAN LIMITED EDITION
TECHNICAL NOTES
BREMONT WATERMAN
LIMITED EDITION
TECHNICAL NOTES
Bremont Watch Company would
like to congratulate you most
sincerely on your purchase of a
Bremont timepiece.
Our timepieces have been
developed over several years to
cater for those that demand more
out of their mechanical watch. Our
aim has always been to produce
beautifully engineered timepieces
of exceptional quality that will last
several lifetimes, and ones that feel
particularly special when placed on
the wrist.
GB
1
III III
2
3
4
5
6
7
Minute hand
Date indicator
Setting crown (I, II & III)
*Unscrew crown to reach
position I
Second hand
Hour hand
24 hour hand (GMT)
Rotating bezel
1
2
3
4
5
6
7
USING THE SETTING CROWN (POSITIONS I, II & III)
WATCH FEATURES
I Normal running of watch and hand winding
II Rapid correction of date and 24 hour hand
III Position for setting the time with stop second and correction
of the date at every passing of midnight
Do not use the rapid date change function between 20:00 and
03:00 as this may damage the date change mechanism
CHANGING THE STRAP
REMOVING A STRAP
Use the end of your watch tool to
carefully lever the spring bar out
of the lug.
FITTING A STRAP
Place one end of the spring bar
into the hole in the lug and use the
end of the watch tool to lever the
other end into position.
BREMONT WATERMAN LIMITED EDITION
AUTOMATIC CHRONOMETER
Your Bremont watch shows you the time in hours, minutes and seconds,
and the date. The mechanical movement with automatic winding has
a free-swinging rotor that keeps the mainspring wound via the motion
of your wrist. The movement in your BREMONT WATERMAN LIMITED
EDITION has 21 jewels, runs at 28,800 bph and has a 42-hour power reserve
once fully wound. The watch is water resistant to 500m (50ATM) and the
dial is protected by a dual anti-reflective sapphire crystal that is retained
securely in the case.
To ensure that this rather special watch continues to run beautifully for
years to come you must follow a few important operating instructions...
WINDING THE WATCH
Your watch has a screw-in crown. The purpose of the screw-in crown is
to protect the watch from penetrating water and to avoid unintentional
adjustment of the time or date. To unscrew the crown, rotate the crown
to the left where it will automatically assume position I. This position
is also the winding position for the watch, and you can manually wind
the watch by hand. The movement will automatically start with just a
few revolutions of the rotor, however it is better to wind the movement
fully with 30-40 revolutions of the crown. By doing this you will achieve
maximum accuracy and have a power reserve of 42-hours, even when the
watch is not on your wrist.
SETTING THE DATE
You can adjust the date by unscrewing the crown and pulling it out to
position II. You will now be able to change the date by rotating the crown
anti-clockwise.
Do not change the date between 20:00 and 03:00
SETTING THE TIME
Pull the crown out to position III, this will stop the movement, you can
now position the minute hand exactly. To start the second hand, push the
crown back to position I. When setting the time, it is worth noting that
the date change always takes place at mid-night (00:00). If this change has
already taken place at 12:00 noon, you must move the hands forward by
12 hours. Ensure that the crown is screwed back in after setting the watch.
This can be achieved by gently pressing the crown down whilst rotating it
in a clockwise direction.
USING THE 24 HOUR HAND
The 24 hour hand allows the wearer to tell the time in an additional time
zone. Before setting the 24 hour hand ensure that the local time is set on
the watch first. To set the 24 hour hand, pull the crown out to position
II, this will not stop the movement from running. Whilst the crown is in
position II, rotate the crown clockwise to set the 24 hour hand to the 24
hour markers on the dial ring. For example, if you set the watch to 1pm local
time and your second location is 5 hours ahead, you would set the 24 hour
hand at 18 hours.
USING THE ROTATING BEZEL
Your BREMONT WATERMAN LIMITED EDITION has a uni-directional
rotating bezel which can be used to keep track of elapsed time. For
example, if the time on your watch reads 12:20, align the triangle on the
bezel with the minute hand. Now, say the time is 12:40, the minute hand
position will point towards 20 on the bezel, indicating that 20 minutes of
time has elapsed.
CHRONOMETER TESTING
Your Bremont watch is chronometer tested to ISO 3159 standards and
accompanied by a performance certificate to show that the mechanical
movement has passed all of the rigorous precision tests - a necessity of the
chronometer designation.
Remember to complete and return the registration card to
Bremont to register your watch and validate your warranty.
The chronometer testing, which takes 15 days to complete over several
different temperature ranges and watch positions, means that the average
daily variation rate will be between -4 and +6 seconds. With 86,400 seconds in
a single day, this gives Bremont’s watches an accuracy of 99.998%.
WATCH CARE
Bremont watches are put through extensive testing before they are released
from the workshop - whether it is for time-keeping precision, temperature,
shock and scratch resistance or pressure testing; all of our strict tolerances have
to be met. Although Bremont watches have more than proved their resilience
before they are released from our workshop, we want to ensure that the
enjoyment that comes from wearing a Bremont timepiece lasts generations. We
therefore recommend that the following tips for watch care are observed...
CLEANING
Use warm water followed by a microfibre cloth to clean metal and
sapphire.
CROWN
Ensure that the crown is screwed in to prevent entry of water into
the mechanism.
SEA WATER
Wash with fresh water following exposure to saline water.
Tabla de contenidos
Idiomas:
Otros manuales de Mirar de Bremont
Bremont
Bremont AC II Hoja de especificaciones
Bremont
Bremont AC I 32 Hoja de especificaciones
Bremont
Bremont REGATTA AC Hoja de especificaciones
Bremont
Bremont AC35 Hoja de especificaciones
Bremont
Bremont ARGONAUT Hoja de especificaciones
Bremont
Bremont AC I Hoja de especificaciones
Bremont
Bremont TERRA NOVA LIMITED EDITION Hoja de especificaciones
Bremont
Bremont SOLO-32 Hoja de especificaciones
Bremont
Bremont ALT1-P2 Hoja de especificaciones
Bremont
Bremont SOLO-34 Hoja de especificaciones
Bremont
Bremont ALT1-C Hoja de especificaciones
Bremont
Bremont BROADSWORD Hoja de especificaciones
Bremont
Bremont MBIII Hoja de especificaciones
Bremont
Bremont ALT1-WT Hoja de especificaciones
Bremont
Bremont ALT1-ZT Hoja de especificaciones
Bremont
Bremont AC-R-TI Hoja de especificaciones
Bremont
Bremont AIRCO MACH 1 Hoja de especificaciones
Bremont
Bremont U-2 Hoja de especificaciones
Bremont
Bremont NORTON V4 Hoja de especificaciones
Bremont
Bremont JAGUAR MKII Hoja de especificaciones
