Bremont SOLO-34 Hoja de especificaciones
SOLO-34
TECHNICAL NOTES
SOLO-34
TECHNICAL NOTES
Bremont Watch Company would
like to congratulate you most
sincerely on your purchase of a
Bremont timepiece.
Our timepieces have been
developed over several years to
cater for those that demand more
out of their mechanical watch. Our
aim has always been to produce
beautifully engineered timepieces
of exceptional quality that will last
several lifetimes, and ones that feel
particularly special when placed on
the wrist.
EN
1
2
3
5
4
I II III
Minute hand
Date indicator
Setting crown (I, II & III)
Second hand
Hour hand
1
2
3
4
5
CROWN: THREE POSITIONS
WATCH FEATURES
I Normal running of watch and hand winding
II Rapid correction of date
III Position for setting the time with stop second and correction of the
date at every passing of midnight
CHANGING THE STRAP
REMOVING A STRAP
Use the end of your watch tool
to carefully remove the spring bar
out of the case lug. Pressure should
be applied to the side of the strap
to reveal the spring bar, allowing
access for the pronged end of
the tool to sit over the flange of
the spring bar. Carefully depress
the spring bar to allow it to be
removed from the case lug.
FITTING A STRAP
Place the end of the spring bar into
one hole of the case lug and use the
end of the watch tool to depress
the spring bar allowing the other
end to locate into the opposite
hole. Slowly release and ensure that
the spring bar locates correctly into
the hole of the case lug.
SOLO-34
AUTOMATIC CHRONOMETER
Your Bremont watch shows you the time in hours, minutes and seconds,
and the date. The mechanical movement with automatic winding has a
free-swinging rotor that keeps the mainspring wound via the motion of
your wrist. The movement in your SOLO-34 has 25 jewels, runs at 28,800
bph and has a 42-hour power reserve once fully wound. The watch is water
resistant to 100m (10ATM) and the dial is protected by a multi-layered anti-
reflective sapphire crystal that is retained securely in the case.
To ensure that this rather special watch continues to run beautifully for
years to come you must follow a few important operating instructions...
SCREW-DOWN CROWN
Your SOLO-34 is fitted with a screw-down crown. To wind or to adjust
your watch this crown must be unscrewed in an anti-clockwise direction.
When turned in this direction the crown will move out to position I
automatically and allow you to wind the watch. Pulling the crown out
further will allow different operations to be performed as detailed
overleaf. When finished winding or adjusting the watch please ensure that
the crown is screwed back in by gently pushing and turning in a clockwise
direction until the crown comes to a stop.
WINDING THE WATCH
Your SOLO-34 can be wound from crown position I by rotating the crown
in a clockwise direction. Although the movement will automatically start
with just a few revolutions of the rotor, it is better to wind the movement
fully with 30-40 revolutions of the crown. By doing this you will achieve
maximum accuracy and have a power reserve of 42-hours, even when the
watch is not on your wrist.
SETTING THE DATE
You can adjust the date by pulling out the crown to position II. You will
now be able to change the date by rotating the crown clockwise.
SETTING THE TIME
Pull the crown out to position III, this will stop the movement, you can
now position the minute hand exactly. To start the second hand, push
the crown back to position I. When setting the time, it is worth noting
that the date change always takes place at midnight (00:00). If this
change has already taken place at 12:00 noon, you must move the hands
forward by 12 hours. Always ensure that the crown is screwed back in
after setting the watch.
CHRONOMETER TESTING
Your Bremont watch is chronometer tested to ISO 3159 standard and
accompanied by a performance certificate to show that the mechanical
movement has passed all of the rigorous precision tests - a necessity of the
chronometer designation.
Important Notice: Remember to complete and return the registration
card to Bremont, registering your watch and to validate your warranty.
The chronometer testing, which takes 15 days to complete over several
different temperature ranges and watch positions, means that the average
daily variation rate will be between -4 and +6 seconds. With 86,400 seconds
in a single day, this gives Bremont’s watches an accuracy of 99.998%.
WATCH CARE
Bremont watches are put through extensive testing before they are released
from the workshop - whether it is for time-keeping precision, temperature,
shock and scratch resistance or pressure testing; all of our strict tolerances have
to be met. Although Bremont watches have more than proved their resilience
before they are released from our workshop, we want to ensure that the
enjoyment that comes from wearing a Bremont timepiece lasts generations. We
therefore recommend that the following tips for watch care are observed...
CLEANING
Use warm water followed by a microfibre cloth to clean metal and sapphire.
CROWN
Ensure that the crown is pushed in to prevent entry of water into the
mechanism.
SEA WATER
Wash with fresh water following exposure to saline water.
SHOCKS AND JOLTS
Avoid any heavy shocks to the watch.
MAGNETIC FIELDS
Avoid contact with electrical equipment and strong magnets such as
speakers, magnetic tablet case covers and radio alarm clocks.
TEMPERATURE
Keeping the watch in contact with wrist will help minimise any exposure
to extremes. Bremont recommend that you do not wear your watch near
hot water, for example in the shower, steam room or jacuzzi. Extreme
changes in temperature can cause moisture to permeate the seals and
cause condensation to form inside of the watch.
Tabla de contenidos
Idiomas:
Otros manuales de Mirar de Bremont
Bremont
Bremont AC I 32 Hoja de especificaciones
Bremont
Bremont ALT1-C Hoja de especificaciones
Bremont
Bremont U-2 Hoja de especificaciones
Bremont
Bremont ARROW Hoja de especificaciones
Bremont
Bremont NORTON V4 Hoja de especificaciones
Bremont
Bremont SUPERMARINE S300 Hoja de especificaciones
Bremont
Bremont ALT1-WT Hoja de especificaciones
Bremont
Bremont ALT1-P2 Hoja de especificaciones
Bremont
Bremont REGATTA AC Hoja de especificaciones
Bremont
Bremont MBIII Hoja de especificaciones
Bremont
Bremont BROADSWORD Hoja de especificaciones
Bremont
Bremont AC I Hoja de especificaciones
Bremont
Bremont AC II Hoja de especificaciones
Bremont
Bremont AC35 Hoja de especificaciones
Bremont
Bremont ARGONAUT Hoja de especificaciones
Bremont
Bremont SOLO Hoja de especificaciones
Bremont
Bremont TERRA NOVA LIMITED EDITION Hoja de especificaciones
Bremont
Bremont AC-R-TI Hoja de especificaciones
Bremont
Bremont BOEING 247 TI-GMT Hoja de especificaciones
Bremont
Bremont ALT1-ZT Hoja de especificaciones
