Bosch EX7 Manual de usuario

INSTALLATION

INSTRUCTIONS

EX7/8

Ceiling / Wall Mount Camera

MAN-7-8-05

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep this instruction.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with manufacturer instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong is

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the power where they exit from

the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in a way, such as power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

IMPORTANT

For best results, please read this Instruction Booklet

prior to installing the EX7/8 Camera

WARNING !

CSA Certified / UL Listed CLASS 2 power adaptors must

be used in order to comply with electrical safety standards.

Bosch Security Systems, Inc. will not be responsible for

injuries or damages resulting from the

improper installation or use of any product

sold by Bosch Security Systems, Inc their agents,

distributors or dealers.

NOTE: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part

15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. As part of its’ normal operation this

device can generate radio frequency energy and if not

installed and used in accordance with the installation

manual may cause interference to radio communications.

However, there is no guarantee that interference will not

occur on a particular installation. If the device does cause

interference to radio or television reception the user is

encouraged to try to correct the interference by one or more

of the following measures:

1) Fit Ferrite beads on all cable to and from the power

supply box, within the box walls.

2) Route the composite cable between the camera and the

power supply in steel conduit piping over the entire run of

the cable up to and including connection to a deep conduit

base fitted under the camera and a conduit fitting adaptor in

the wall of the PSU box.

3) Contact BOSCH Service Center for further advice.

INDEX PAGE

Description……………………………………………..….1

Unpacking……………………………………………..…..2

Parts List…………………………………………………..2

Items Required for Installation…………………………..2

Initial Preparations………………………………………..3

Guidelines…………………………………………………3

Mechanical Specifications……………………………….4

SECTION

1. Camera Housing –

Internal Modules, Locations and Access…………..5

2. Power Input Wiring Connections……………………6

3. Mounting – Camera Housing………………………..7

4. Camera Lens – Settings and Adjustments…………9

5. Camera Re-Assembly………………………………..13

6. Troubleshooting Guide……………………………….14

7. Mounting Hole Template ……………………………16

8. General Specifications ………………………………17

- 1 -

DESCRIPTION

The EX7/8 Ceiling or Wall Mount Camera features one

or two CCD sensors to view “coming and going” images.

This is ideal for use in prison corridors, school hallways

and underground parking garages. The camera is

extremely durable due to its welded metal housing

shape and polycarbonate viewing windows. The EX7/8

is also weatherproof, making it perfect for outdoor use.

Cameras are available in monochrome & color.

Voltage regulator circuits automatically allow 12V dc or

24V ac operation without any wiring changes. Its’ wider

voltage range also provides protection from voltage

surge, transient spikes, and reverse voltage.

The difference between the EX7 and the EX8 is the EX7

Camera is a single sensor version and the EX8 is a dual

sensors version.

- 2 -

UNPACKING

Care should be taken when unpacking the shipped unit.

Check the parts list and confirm all items have been located.

Inspect the equipment thoroughly to ensure nothing was

damaged in transit.

Contact BOSCH Service Center if a problem is noted, see

the rear page of this booklet for contact numbers.

PARTS LIST (items supplied with unit)

Camera unit.

One security Allen key.

Installation Instructions.

ITEMS REQUIRED FOR INSTALLATION (not supplied)

Phillips screwdriver.

Small slotted screwdriver.

Hardware for camera mounting (bolts, etc.)

- 3 -

INITIAL PREPARATIONS

•Determine the operating voltage at the installation

site. The camera‘s Voltage Regulator Board

accepts both 12VDC and 24VAC input without

change to internal connections.

See Section 2, Input Power Connections.

•Determine the optimum location for the camera.

See Section 3, Mounting-Camera Housing.

•The factory default is set for ceiling mount. For

unique designation wall mount, see section 4.

•All cameras have been tested prior to shipment.

The factory default is set for ceiling mount. After

the wiring has been reconnected, it is advisable to

check the camera’s operation before installation.

GUIDELINES

Four requirements must be met before the EX7/8 can

be installed. The sections listed below will aid the

installer in setting up the camera for these requirements.

Section 2. Power Input Wiring Connections

Section 3. Mounting-Camera Housing

Section 4. Camera Lens – Settings and Adjustments

Section 5. Camera Re-Assembly

- 4 -

MECHANICAL SPECIFICATIONS

(See Section 8 - General Specifications, for more

information)

SIDE VIEW

FRONT VIEW

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Bosch

Bosch

Bosch DINION IP starlight 7000 HD Manual de usuario

Bosch

Bosch NBN-80122 Manual de usuario

Bosch

Bosch DINION 5000 IP Manual de usuario

Bosch

Bosch MIC440AXWUD14636N Manual de usuario

Bosch

Bosch AUTODOME 700 Series Manual de usuario

Bosch

Bosch MIC Series 440 Manual de usuario

Bosch

Bosch WZ16 Manual de usuario

Bosch

Bosch DINION XF LTC 0495 Manual de usuario

Bosch

Bosch VG4 200 Series Manual de usuario

Bosch

Bosch EX36 Manual de usuario

Bosch

Bosch REG‑Z1‑8050‑XC‑00E‑01 Manual de usuario

Bosch

Bosch EX49N Manual de usuario

Bosch

Bosch FLEXIDOME IP starlight 8000i Manual de usuario

Bosch

Bosch AUTODOME IP 5000i IR Manual de usuario

Bosch

Bosch DinionHD NBN-832-38W Manual de usuario

Bosch

Bosch Camera Manual de usuario

Bosch

Bosch VEZ Series Manual de usuario

Bosch

Bosch LTC-0485-21 Manual de usuario

Bosch

Bosch DINION inteox 7100i IR Manual de usuario

Bosch

Bosch EX62XF Manual de usuario

Bosch

Bosch VG4 Series Manual de usuario

Bosch

Bosch LTC 0630 Series Manual de usuario

Bosch

Bosch NBC-265-P Instrucciones de uso

Bosch

Bosch MicroDome NDC-274-P Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario