Bosch DINION 5000 Manual de usuario

DINION capture 5000/7000

VER Series

en Installation Manual

DINION capture 5000/7000 Table of Contents | en 3

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

Table of Contents

1Safety 5

1.1 Safety precautions 5

1.2 Important safety instructions 6

1.3 Important notices 9

1.4 FCC & ICES compliance 13

1.5 Bosch notices 15

2 Description 16

2.1 Parts List 16

3 Installing the DINION capture 17

3.1 Determining the Range 17

3.2 Determining the Angle 18

3.3 Mounting the DINION capture 20

3.4 Preparing the Wiring 23

3.4.1 Power Input Connections 23

3.4.2 Video Connections 23

3.5 Making the Connections 24

3.6 Automatic Mode Switching 24

4 Configuration 28

4.1 Menus 28

4.1.1 Top level menus 28

4.1.2 Accessing Menu Keys 28

4.1.3 Menu Navigation Keys 31

4.2 Pre-Defined Modes 31

4.3 Day/Night switching (DINION capture 7000) 32

4.4 Camera control communication (Bilinx) 33

4.5 Main menu structure 34

4.5.1 Mode submenu 35

4.5.2 ALC submenu 35

4.5.3 Shutter/AGC submenu 37

4.5.4 Day/Night submenu

(Overview Camera - DINION capture 7000 only) 39

4.5.5 Enhance / Dynamic Engine submenu 41

4en | Table of Contents DINION capture 5000/7000

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

4.5.6 Color submenu

(Overview Camera - DINION capture 7000 only) 43

4.5.7 VMD submenu 44

4.6 Install menu structure 45

4.6.1 Language submenu 46

4.6.2 Lens Wizard submenu 46

4.6.3 Alarm I/O submenu 47

4.6.4 Connections submenu 48

4.6.5 Test signal submenu 49

4.6.6 Camera ID submenu 50

4.6.7 Privacy masking submenu 51

4.6.8 Defaults submenu 51

A Dimensional Drawings 52

DINION capture 5000/7000 Safety | en 5

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

NOTICE!

This symbol indicates information or a company policy that

relates directly or indirectly to the safety of personnel or

protection of property.

6en | Safety DINION capture 5000/7000

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Unplug the unit from the outlet before cleaning.

Follow any instructions provided with the unit. Generally,

using a dry cloth for cleaning is sufficient but a moist, fluff-

free cloth or leather shammy may also be used. Do not use

aerosol cleaners.

2. Heat Sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other

equipment (including amplifiers) that produce heat.

3. Object and liquid entry - Never push objects of any kind

into this unit through openings as they may touch

dangerous voltage points or short-out parts that could

result in a fire or electrical shock. Never spill liquid of any

kind in the unit.

4. Lightning - For added protection during a lightning storm,

or when leaving this unit unattended and unused for long

periods, unplug the power source and disconnect the

cable system. This will prevent damage to the unit from

lightning and power line surges.

5. Controls adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit. Use of

controls or adjustments, or performance of procedures

other than those specified, may result in hazardous

radiation exposure.

6. Overloading - Do not overload circuits. This can cause fire

or electrical shock.

7. Power cable protection - Protect the power cable from

foot traffic, from being pinched by items placed upon it,

and at cable's exit from the unit.

DINION capture 5000/7000 Safety | en 7

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

8. Power disconnect - Units have power supplied to the unit

whenever the power cord is inserted into the power

source. The power cord plug is the main power disconnect

device for switching off the voltage for all units.

9. Power sources - Operate the unit only from the type of

power source indicated on the label. Before proceeding,

be sure to disconnect the power from the cable to be

installed into the unit.

– For external power supplied units, use only the

recommended or approved power supplies.

– For limited power source units, this power source

must comply with EN60950. Substitutions may

damage the unit or cause fire or shock.

– For 24 VAC units, voltage applied to the unit's power

input should not exceed ±10%, or 26.4 VAC. User-

supplied wiring must comply with local electrical

codes (Class 2 power levels). Do not ground the

supply at the terminals or at the unit's power supply

terminals.

– If unsure of the type of power supply to use, contact

your dealer or local power company.

10. Servicing - Do not attempt to service this unit yourself.

11. Damage requiring service - Unplug the unit from the main

AC power source and refer servicing to qualified service

personnel when any damage to the equipment has

occurred, such as:

– the power supply cord or plug is damaged;

– internal exposure to moisture, water, and/or

inclement weather (rain, snow, etc.);

– liquid has been spilled in the equipment;

– an object has fallen into the unit;

– unit has been dropped;

– unit exhibits a distinct change in performance;

– unit does not operate normally when the user

correctly follows the operating instructions.

8en | Safety DINION capture 5000/7000

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

12. Replacement parts - Be sure the service technician uses

replacement parts specified by the manufacturer, or that

have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical

shock, or other hazards.

13. Safety check - Safety checks should be performed upon

completion of service or repairs to the unit to ensure

proper operating condition.

14. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

15. Attachments, changes or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change or modification of the equipment, not

expressly approved by Bosch, could void the warranty or,

in the case of an authorization agreement, authority to

operate the equipment.

DINION capture 5000/7000 Safety | en 9

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

1.3 Important notices

All-pole power switch - Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

switch as the main disconnect device for switching off the

voltage to the unit.

Camera signal - Protect the cable with a primary protector if

the camera signal is beyond 140 feet, in accordance with

NEC800 (CEC Section 60).

This product has been tested according to standard CIE/IEC

62471:2006 “Photobiological safety of lamps and lamp

systems” and found to meet Risk Group 1 for exposure limit

4.3.7 “Infrared radiation hazard exposure limits for the eye.”

For other hazard exposure limits, the product was found to be

exempt. Risk Group 1 is characterized in the standard as

“products are safe for most use applications, except for very

prolonged exposures where direct ocular exposures may be

expected.” Risk Group 1 sources do not pose an infrared

radiation hazard for the eye for times less than 100 s at

distances beyond 200 mm or 8 inches.

Accessories - Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall and cause serious

injury and/or serious damage to the unit. Use only with the

cart, stand, tripod, bracket, or table specified by the

manufacturer. When a cart is used, use caution and care when

moving the cart/apparatus combination to avoid injury from

tip-over. Quick stops, excessive force, or uneven surfaces may

cause the cart/unit combination to overturn. Mount the unit

per the manufacturer's instructions.

NOTICE!

RISK GROUP 1

IR emitted from this product.

10 en | Safety DINION capture 5000/7000

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

The Exposure Hazard Value for the product (ratio of the

Exposure level to the Exposure limit) is up to 1.8 at a test

distance of 200 mm or 8 inches. The Hazard Distance (distance

beyond which the product falls into the exempt/safe group) is

at most 350 mm or 14 inches. Note that typical operating

distances for license plate capture (3.8 m or 12.5 feet and

greater) are much greater than the Hazard Distance.

When servicing the unit, physically disconnect the power supply

to avoid possible IR exposure to the eyes. If physical

disconnection is not possible, use appropriate shielding to

block the LED panel or use eye protection with a transmission

of 50% or less at a wavelength of 850 nm.

Coax grounding:

– Ground the cable system if connecting an outside cable

system to the unit.

– Follow proper safety precautions such as grounding for

any outdoor device connected to this unit.

U.S.A. models only - Section 810 of the National Electrical Code,

ANSI/NFPA No.70, provides information regarding proper

grounding of the mount and supporting structure, grounding of

the coax to a discharge unit, size of grounding conductors,

location of discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Electronic Surveillance - This device is intended for use in

public areas only. U.S. federal law strictly prohibits

surreptitious recording of oral communications.

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that electronic

and electrical appliances, which have reached the end of their

working life, must be collected and disposed of separately

from household waste material. Separate collecting systems

are usually in place for disused electronic and electrical

products. Please dispose of these units at an environmentally

compatible recycling facility, per European Directive 2002/96/

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Bosch

Bosch

Bosch DINION IP starlight 7000 HD Manual de usuario

Bosch

Bosch LTC 0440 Series Manual de usuario

Bosch

Bosch VEZ-400 Series Manual de usuario

Bosch

Bosch LTC 1271 Series Manual de usuario

Bosch

Bosch FLEXIDOME IP starlight 8000i Manual de usuario

Bosch

Bosch UHI-OG-0 Manual de usuario

Bosch

Bosch NBN-80122 Manual de usuario

Bosch

Bosch VDI 230 Manual de usuario

Bosch

Bosch AutoDome VG5-162-EC0 Manual de usuario

Bosch

Bosch FLEXIDOME multi 7000i IR Manual de usuario

Bosch

Bosch FLEXIDOME micro 3100i NUV-3702-F02 Manual de usuario

Bosch

Bosch MIC IP starlight 7000i Manual de usuario

Bosch

Bosch VDN-242 Instrucciones de uso

Bosch

Bosch LTC-0455-61 Manual de usuario

Bosch

Bosch VDC-445V03-20S Manual de usuario

Bosch

Bosch WZ45 Instrucciones de funcionamiento

Bosch

Bosch EX72C7V0922-N Manual de usuario

Bosch

Bosch VEZ-400 Series Manual de usuario

Bosch

Bosch AutoDome Manual de instrucciones de instalación

Bosch

Bosch VOT-320V0xxL Manual de usuario

Bosch

Bosch VG4-161-CC0 Manual de usuario

Bosch

Bosch MIC IP fusion 9000i Manual de usuario

Bosch

Bosch CAM940C Manual de usuario

Bosch

Bosch NPD-5512-Z30 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario