Bosch B12 Manual de usuario

Otros manuales de Rack y soporte de Bosch

Bosch

Bosch NDA-FMT200-DOME Manual de usuario

Bosch

Bosch BDS3210 Manual de usuario

Bosch

Bosch GTA 600 Professional Manual de usuario

Bosch

Bosch GTA 600 Professional Manual de usuario

Bosch

Bosch MSGZWML Manual de usuario

Bosch

Bosch S 500 A PROFESSIONAL Manual de usuario

Bosch

Bosch TS2000 Instrucciones de montaje

Bosch

Bosch RM 10 Guía rápida

Bosch

Bosch PTA 2400 Manual de usuario

Bosch

Bosch GTA 2500 W Professional Manual de usuario

Bosch

Bosch BDS3210 Manual de usuario

Bosch

Bosch GTA500 Instrucciones de montaje

Bosch

Bosch VG4-A-9543 Manual de usuario

Bosch

Bosch AutoDome Manual de usuario

Bosch

Bosch HMP 0001 A Manual de usuario

Bosch

Bosch GTA500 Instrucciones de montaje

Bosch

Bosch GTA 2500 W Professional Manual de usuario

Bosch

Bosch GTA 600 Professional Manual de usuario

Bosch

Bosch FBH 0000 A Manual de usuario

Bosch

Bosch FPM-5000-KMC Manual de usuario

Bosch

Bosch GTA 2500 W Professional Manual de usuario

Bosch

Bosch T10031 Manual de usuario

Bosch

Bosch SCT 815 S4 Manual de usuario

Bosch

Bosch Professional GTA 560 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario

© 2013 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450

Dimensions (HxWxD) 9.25 in x 8.63 in x .5 in (23.5 cm x 21.92 cm x 1.27 cm)

3 Speciﬁcations

Callout Description

1Mounting plate hooks

2Plate mounting hole

2.4 Securing mounting skirt in enclosure

Complete the installation by resting the hook tabs on the mounting plate

hooks within the enclosure. Secure the lock-down tab to the plate mounting

hole with the screw provided in this kit. Refer to Figure 1.1 and Figure 2.3.

11

2

Figure 2.3: Universal enclosure

Reading Bosch Security Systems, Inc. Product Date Codes

For Product Date Code information, refer to the Bosch Security Systems, Inc.

Web site at: http://www.boschsecurity.com/datecodes/.

en Installation Guide

Mounting Plate for D8103

B12

© 2013 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450 F.01U.262.949 | 03 | 2013.02 | 2

2.2 Place the device

Lay the mounting plate on a ﬂat surface with the standoffs facing up. Set

the device on top of the standoffs as shown in Figure 2.2. Make sure the

holes in the corners of the device are aligned with the openings at the top

of each of the standoffs.

Figure 2.1: Standoff attachment

2.3 Secure the device

Secure the device to the mounting plate with self-threading screws as

shown in Figure 2.2. (Screws provided separately with the device being

mounted.)

Figure 2.2: Device attachment to mounting plate

1

2

1

3

22

2

Callout Description

1 Hook tabs

2 Support post

3 Lock down tab

Figure 1.1: BI2 Mounting Plate

1 Overview

The B12 Mounting Plate is required when mounting B5512/B4512 Control

Panels, the B520 Aux Power Module, or other similar devices in D8103 Uni-

versal Enclosures, D8108A Attack Enclosures, or D8109 Fire Enclosures.

This kit includes one B12 Mounting Plate and one screw to secure the lock

down tab.

2 Mounting

To mount a device to the B12 Mounting Plate, complete the following steps.

2.1 Attach standoffs

Snap four plastic standoffs onto the four support posts as shown in Figure

2.1. (Standoffs provided separately with the device being mounted.)

NOTICE!

Do not

attach the standoffs with screws at this time.