Bolymedia BG668 36MP Series Manual de usuario

Trail Cameras – BG668 36MP Series

User Manual

BG668 36MP Series

Trail Cameras – BG668 36MP Series

Table of Contents

1. Basic...........................................................................................- 1 -

1.1 General Description.......................................................... - 1 -

1.2 Product View..................................................................... - 2 -

2. Camera Operations................................................................ - 3 -

2.1 Batteries / Power Supply................................................. - 3 -

2.2 SD Card Information....................................................... - 3 -

2.3 SIM Card Information.....................................................- 4 -

2.4 Camera Modes.................................................................. - 5 -

2.5 Manual Image / Video Capturing..................................- 6 -

2.6 Manage Images and/or Videos...................................... - 6 -

2.7 Sending Images via MMS/GPRS/Molnus....................- 7 -

2.8 Trigger Modes.................................................................. - 8 -

2.9 Password Setup................................................................ - 9 -

3. Camera Setup Settings & Display...................................... - 10 -

3.1 Interface & Display Settings..........................................- 10 -

3.2 Mobile Communication................................................. - 11 -

3.3 Camera Setup Software................................................. - 12 -

3.4 Cloud Service - Molnus..................................................- 14 -

3.5 Mobile Applications....................................................... - 16 -

3.5.1 SMS Command List.................................................- 17 -

3.5.2 BG Tools Usage Instructions for Android App.. - 18 -

3.6 Camera Setup Options.................................................. - 22 -

4. Detection Ranges – PIR Detection Zones........................- 28 -

5. Technical Specifications......................................................- 29 -

6. Parts List................................................................................- 30 -

WARRANTY CARD.................................................................. - 31 -

Trail Cameras – BG668 36MP Series

- 1 -

1. Basic

1.1 General Description

BG668, a digital scouting camera with GPS and

communications functionality, is a digital infrared surveillance

camera that can be triggered by any human or animal

movement, monitored by a highly sensitive Passive Infrared

(PIR) motion sensor. After being triggered, the camera then

automatically captures high quality pictures (up to 36M pixels)

or records video clips (4K).

Password protection makes it impossible to enter the camera

without a password, helping to protect the data.

GPS automatic positioning function,add longitude and latitude

into image properties, can also send GPS information to

mobile phone or Email, for viewing camera location.

BG668-E36WG/BG668-AU36WG

Can send pictures instantly to your mobile device or videos

(less than 20M) to your e-mail via GPRS network.

BG668-V36WG/BG668-A36WG

Can only send pictures to your e-mail via GPRS network.

Trail Cameras – BG668 36MP Series

- 2 -

1.2 Product View

Fig. 1: Front View Fig. 2: Inner Panel View

Fig. 3: Bottom view

Antenna

Infrared LED

Lens

Microphone

Lock

PIR

Indication LED

Right

Up/Video

OK/Play

SD Card Slot

Left

SIM Card Slot

Down/Photo

Speaker

Power Switch

Shot

LCD display

Battery Tray

DC In

USB Port

Screw Hole

Trail Cameras – BG668 36MP Series

- 3 -

2. Camera Operations

2.1 Batteries / Power Supply

2.1.1 Powered by Batteries

①4 or 8 AA batteries

High-density, high-performance rechargeable or

non-rechargeable Alkaline batteries are recommended.

You can also use NiMH batteries as well, each battery

should be above 1.5V.

②5X18650 batteries

Need to use Pointed Head 18650 Battery.

2.1.2 Power Supply

A DC 6-Volt, 2 A external power supply adapter can also

be used to power the camera (not included).

2.2 SD Card Information

To take full advantage of the latest technologies, we

recommend Class 10 SD cards or better, which have

fast transfer speeds and long durability for extensive

shooting in the most extreme outdoor conditions. Some

SD cards are deemed Secure Digital High Capacity

(SDHC) PRO cards, which work with SDHC compatible

devices only. Please check that your product is

compatible with SDHC cards.

Insert the SD card into the camera before

turning on the camera

This camera supports up to a 32GB capacity SD card,

and has no built-in internal memory. The camera will

not function without the SD card properly inserted into

the camera.

Trail Cameras – BG668 36MP Series

- 4 -

Make sure the SD card is unlocked before

inserting it into the camera

If you experience any problems with an

inserted SD card

Try reformatting the SD card, utilizing the camera’s

main settings option.

2.3 SIM Card Information

Insert the SIM card into the camera before

turning on the camera

The camera SIM card slot is sized for a standard SIM

card. If you have a nano or micro size SIM card,

utilizing a SIM card adapter (included with most of our

cameras) will be required to connect your camera to the

cellular network via SIM card.

Supported 4G communication band

BG668-E36WG

FDD LTE: B1/B3/B5/B7/B8/B20

TDD LTE: B38/B40/B41

WCDMA: B1/B5/B8

GSM: 900/1800

BG668-AU36WG

LTE FDD: B1/B3/B4/B5/B7/B8/B28

LTE TDD: B40

WCDMA: B1/B2/B5/B8

GSM: B2/B3/B5/B8

Trail Cameras – BG668 36MP Series

- 5 -

BG668-A36WG

LTE FDD: B2/B4/B12

WCDMA: B2/B4/B5

BG668-V36WG

LTE FDD: B4/B13

Note: The camera will still function without a

SIM card. The SIM card is needed only for the

wireless/cellular messaging capabilities.

2.4 Camera Modes

The different modes are accessed by sliding the power

switch to the different positions marked on the camera.

The power switch is located inside the camera on the

bottom right of the LCD screen.

The different camera modes are as follows:

OFF Mode

Turns the camera off. The camera will still consume a

small amount of power while in “OFF” mode. It is

recommended to remove the batteries if the camera

will not be used for a long period of time.

TEST/SETUP Mode

In this mode, the camera allows you to customize the

camera settings or play back pictures and videos the

camera has taken on the LCD display.

In this mode, the camera will automatically shut

down after a few minutes of no operation.

ON Mode [ Hunting Mode ]

Trail Cameras – BG668 36MP Series

- 6 -

The camera will take pictures or record video when

motion is detected and/or at specific time intervals,

according to the programmed settings. After

switching the camera to the ON position, the red LED

motion indicator will blink for about 1 minute and

then turn off. This preset time allows you to adjust

the camera’s position if needed, before the camera

becomes active.

2.5 Manual Image / Video Capturing

Place the camera in TEST/SETUP mode and press the

“SHOT” button on the right of the control pad to

manually capture photos or record video.

Press “SHOT” again to stop capturing video.

2.6 Manage Images and/or Videos

Place the camera in TEST/SETUP mode and press the

“OK/Play” button to view images or videos. The latest

image or video will be shown on the LCD screen.

To view:

Press ▲or ▼to view the next or previous image or

video.Press “SHOT” to start a video.

To delete:

Press OK in Test/Setup Mode to enter into Playback

mode and access the pictures and videos. Press the ▲

or ▼to toggle between photos to find the photo(s) to

delete. Once selected, press the “MENU”button and

the options Del One and Del All appear. Press OK

Trail Cameras – BG668 36MP Series

- 7 -

when the Del One option is selected. Press OK again

to confirm you want to delete the picture or video

selected.

2.7 Sending Images via MMS/GPRS/Molnus

Images can be sent directly to your wireless device or

email, based on the Send Mode settings. Email and

wireless device information must be set up while the

camera is in TEST/SETUP mode. Images can be sent via

MMS/GPRS/Molnus when a correctly set up SIM card is

recognized, installed and the wireless signal strength is

adequate.

You have the options of Molnus,email MMS, email

GPRS, or phone MMS. To choose an option, enter the

TEST/SETUP mode, click the menu button and scroll

right until you reach the internet tab of the camera

settings. Videos will be sent in less than 20MP. （The

BG668-V36WG/BG668-A36WG will only have option:

Molnus,email GPRS）

To manually send a photo:

Put the camera in TEST/SETUP mode

Wait for the camera to acquire a network signal and

the SIM card to be recognized

indicates the SIM card is recognized by the camera.

indicates the SIM card is not recognized by the

camera or the SIM card is not working due to

connection/activation issues.

Take a manual photo by pressing the “SHOT” button

or press OK to view the photos stored on the camera

Trail Cameras – BG668 36MP Series

- 8 -

Find the picture you want to manually send

Press the MENU button to pull up the Send To:

option that is currently set in the camera settings

Press OK again to send the picture via the

messaging option chosen in your camera settings

The Send Mode settings will dictate what time you want

pictures sent to you. When in the ON mode, the options

“Daily Report” and “Instant” will be active, allowing you

to receive a daily report of all your photos taken or instant

messaging of your photos being taken (based on you

settings).

2.8 Trigger Modes

There are 3 different trigger modes for the camera: PIR

Trigger/Sensitivity, Time Lapse, and a combined

PIR/Time Lapse mode. These modes are activated by

three different menu options (PIR Trigger/Sensitivity,

PIR Interval, and Time Lapse).

PIR Trigger/Sensitivity

In this trigger mode, the camera will activate when

motion is detected. If the PIR Trigger/Sensitivity option is

set to OFF, the camera will not respond to any motion

within the camera’s trigger detection range.

Time Lapse

In this camera mode, the camera will activate at the set

time interval regardless of motion detection. If the Time

Lapse option is set to OFF, this trigger function will be

disabled.

Combined PIR/Time Lapse

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de exploración de Bolymedia

Bolymedia

Bolymedia SG860U-12mHD Manual de usuario

Bolymedia

Bolymedia Pocket Camera SG560F Manual de usuario

Bolymedia

Bolymedia SG550-8mHD Manual de usuario

Bolymedia

Bolymedia MG984G Manual de usuario

Bolymedia

Bolymedia SG880MK-18mHD Manual de usuario

Bolymedia

Bolymedia SG565F Manual de usuario

Bolymedia

Bolymedia SG550M-12mHD Manual de usuario

Bolymedia

Bolymedia Pocket Camera SG565F-8mHD Manual de usuario

Bolymedia

Bolymedia SG560K-8mHD Manual de usuario

Bolymedia

Bolymedia SG550M-8mHD Manual de usuario

Bolymedia

Bolymedia MG582-8M Manual de usuario

Bolymedia

Bolymedia SG560-8MHD Manual de usuario

Bolymedia

Bolymedia SG520 Series Manual de usuario

Bolymedia

Bolymedia SG370-6mHD Manual de usuario

Manuales populares de Cámara de exploración de otras marcas

Nestbox

Nestbox C13 Manual de usuario

Wildview

Wildview STC-TGL1 Manual de usuario

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manual de usuario

Suntek

Suntek HC-800M Manual de usuario

Spypoint

Spypoint G4 Manual de usuario

Duramaxx

Duramaxx 10029765 Manual de usuario

Brecom

Brecom C2400 Manual de usuario

BlazeVideo

BlazeVideo A280W Manual de usuario

Bestok

Bestok 5210GM Manual de usuario

GardePro

GardePro X60P Manual de usuario

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manual de usuario

PNI

PNI HUNTING 280C Manual de usuario

Muddy

Muddy Pro-Cam 14 Manual de usuario

Bresser

Bresser 3310006 Manual de usuario

Recon Outdoors

Recon Outdoors HS410 Manual de usuario

Braun

Braun 57660 Manual de usuario

Wildgame

Wildgame Shadow Manual de usuario

Spypoint

Spypoint FLEX Manual de usuario