Black Box LES1101A-R2 Manual de usuario
BL A C K B O X®
Quick Start Guide
1101 Secure Device Server
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]
Customer
Support
Information
LES1101A-R2
Page 2 724-746-5500 | blackbox.com
1101 Secure Device Server Quick Start Guide
TRADEMARKS USED IN THIS MANUAL
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc.
Linux is a registered trademark of Linus Torvalds.
Nagios is a registered trademark of Nagios Enterprises.
Windows is a registered trademark of Microsoft Corporation.
Any other trademarks mentioned in this manual are acknowledged to be
the property of the trademark owners.
About this Guide
This Quick Start Guide walks you through installation, configuration, and local
operation. For more details, refer to the user manual.
To download the user manual, go to ftp://ftp.blackbox.com/anonymous/
manuals/L/LES1101A-R2_USER_rev2.pdf or visit the Black Box Web site
(www.blackbox.com) and enter LES1101A-R2 in the search bar.
Step 1: Check kit contents.
• 1101 Secure Device Server
• This printed quick start guide
• CD-ROM containing SDT Connector and PortShare software
• Universal input 12-VDC power pack
Step 2: Connect the hardware.
• Plug the power pack into the AC power receptacle and connect the DC power
cable to the 12-VDC power socket on the LES1101A-R2.
• Connect the LES1101A-R2 LAN port to your network.
• Connect your serial device to the serial port on the DB9 male connector.
• By default, the LES1101A-R2 is configured in RS-232 mode. RS-232, RS-422,
and RS-485 are software-selectable. Simply press the button to Reset the unit
back to factory default (RS-232 mode),
Page 3
724-746-5500 | blackbox.com
1101 Secure Device Server Quick Start Guide
The DB9 pinouts for the modes are shown below.
DB9 pinouts.
Pin Mode
RS-232 RS-422 RS-485
1 DCD — —
2 RXD RX - —
3 TXD TX + D+
4 DTR — —
5 GND GND GND
Figure 1. Reset button. 6 DSR RX + —
7 RTS TX - D-
8 CTS — —
9 — RS-422 422/485 SELECT
Step 3: Set up the serial device server.
The default serial device server IP address is 192.168.0.1 (subnet mask
255.255.255.0).
With a Web browser on any computer that is connected to the serial device server
through the LAN:
• Enter https://192.168.0.1 into the address bar.
NOTE: The LAN-connected computer must have an IP address in the same
network range (192.168.0.xxx) as the serial device server. If this is not
convenient, you can use the ARP Ping command to set the IP address (refer
to the user manual for details). The serial device server also has its DHCP
client enabled by default, so it will automatically accept any network IP
address assigned by any DHCP server on your network—and will then
respond at both 192.168.0.1 and its DHCP address.
• Log in using the default system user name root and the default password
default. A Welcome screen listing the basic configuration steps is displayed.
• Select “System: Administration,” enter and confirm a new System Password,
and click “Apply.”
Page 4 724-746-5500 | blackbox.com
1101 Secure Device Server Quick Start Guide
• To assign your serial device server a static IP address or to permanently enable
DHCP, select “System: IP” then “Network Interface” and check “DHCP” or
“Static” for configuration method.
Step 4: Configure serial and network devices.
• Select “Serial & Network: Serial Port,” which will display the label, mode, and
protocol options currently set.
• To configure the serial port, click “Edit.”
Serial & Network: Serial Port screen.
• Configure the Common Settings (baud rate, parity, data bits, stop bits, and flow
control) to match those of the serial device being controlled.
• By default, the LES1101A-R2 is configured in RS-232 mode. RS-232, RS-422, and
RS-485 are software-selectable. Simply press the button to Reset the unit back
to factory default (RS-232 mode).
• By default, the serial port is in console server mode. Refer to the user manual for
configuring other modes (terminal server, SDT, serial bridging).
• In Console Server Settings, select the protocols (Telnet, SSH, TCP, RFC2217,
unauthenticated Telnet) that are to be used for the data connection to the
device server and the serial port.
Page 5
724-746-5500 | blackbox.com
1101 Secure Device Server Quick Start Guide
• You may also wish to set the logging level, which specifies the details of the
communications that will be logged and monitored for this serial port. By
default, logging is disabled.
• Click “Apply.”
Step 5: Add new users.
NOTE: We recommend that you set up a new Administrator user (in the admin
group with full access privileges) and log in as this new user for all ongo-
ing administration functions (rather than continuing as root).
• For each new user, select “Serial & Network: Users & Groups” and click “Add
User.”
• Enter a username and enter and confirm a password, and nominate the accessi-
ble hosts and accessible ports the user is allowed to access.
Serial & Network: Users & Groups screen.
• To grant limited access to the management console, check the “User” group.
To grant full access to the management console, check the “Admin” group.
By default, the user is granted no management console access.
• Click “Apply.”
Page 6 724-746-5500 | blackbox.com
1101 Secure Device Server Quick Start Guide
Step 6: Advanced configurations.
The serial device server offers many more advanced functions including:
• The Alerts & Logging: Alerts facility monitors the serial port, user logins, and
managed devices (network hosts, UPS, PDU, etc). A broad selection of trigger
events (such as data patterns, temperature, or battery levels) can be specified.
When triggered, a warning e-mail, SMS, Nagios®, or SNMP alert is sent to a
nominated destination.
• Extensive management of UPSs and RPCs using Open Source NUT and Power-
man tools. The Manage: Power facility enables both administrators and regu-
lar users to monitor and control attached PDU power strips, and servers with
embedded IPMI BMCs.
• Historical logs of all communications with serial and network attached man-
aged devices, system activity, UPS and PDU power status, environmental sta-
tus, etc. The level of logging is set as ports and devices are configured. Alerts
& Logging: Port Log allows this history to be saved locally or remotely. Logs
can be viewed from the Status and Manage menus.
SDT Connector
On the CD-ROM you will nd the SDT Connector software tool. Once you have
configured the serial device server, this tool provides you with secure, point-and-
click access to the serial device server and all the attached devices.
Refer to the provided SDT Connector Quick Start or the user manual on your
CD-ROM for details on remote management of the serial device server and
connected devices.
Port Share
On the CD-ROM, you will also nd PortShare software, which enables applica-
tions on your Windows®or Linux®PC/server/virtual server to control serial port
devices attached to a remote LES1101A-R2 serial device server.
To use PortShare, configure the LES1101A-R2 serial port in console server mode
and specify the appropriate protocol to be used (either RFC2117 or RAW).
Refer to the provided PortShare Quick Start or the user manual on your
CD-ROM for more details.
Page 7
724-746-5500 | blackbox.com
NOTES
BL A C K B OX®
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 30 seconds away at
724-746-5500 or blackbox.com.
724-746-5500 | blackbox.com
About Black Box
Black Box Network Services is your source for an extensive range of networking
and infrastructure products. You’ll find everything from cabinets and racks and
power and surge protection products to media converters and Ethernet switches
all supported by free, live 24/7 Tech support available in 30 seconds or less.
©Copyright 2013. All rights reserved.
LES1101A-R2 Quick Start Guide, version 2
Otros manuales para LES1101A-R2
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Servidor de Black Box
Black Box
Black Box LES290A Manual de usuario
Black Box
Black Box LES2700A-16-R2 Manual de usuario
Black Box
Black Box LWS401A Manual de usuario
Black Box
Black Box LES421A Manual de usuario
Black Box
Black Box les1208A Manual de usuario
Black Box
Black Box LRA 2900 Manual de usuario
Black Box
Black Box Industrial Ethernet Serial Server LES401A... Manual de usuario
Black Box
Black Box LES1202A Manual de usuario
Black Box
Black Box ServShield RM470A-R2 Manual de usuario
Black Box
Black Box Terminal Server Manual de usuario
Black Box
Black Box Multiserver 5000 MX219A Manual de usuario
Black Box
Black Box LWS405A Manual de usuario
Black Box
Black Box 37687 Manual de usuario
Black Box
Black Box LES4011 Manual de usuario
Black Box
Black Box LWS401A Manual de usuario
Black Box
Black Box LES1516A Manual de usuario
Black Box
Black Box 104 Manual de usuario
Black Box
Black Box LE995A-R4 Manual de usuario
Black Box
Black Box 37687 Manual de instrucciones
Black Box
Black Box RAS-PutIn Manual de usuario
