Black Box LB300A-R3 Manual de usuario

Quick Start Guide

This quick start guide describes how to install and use the LB300A-R3,

Ethernet Extender. The Ethernet Extender introduced here provides one

channel for Ethernet over existing voice grade copper wire.

Product Overview

Product Features

yOne 10/100BaseTX (TX) Ethernet port with RJ-45 connector

yAuto negotiation of speed and duplex mode on TX port

yAuto MDIX on TX port

yComplies with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX

standards

yOne Ethernet Extender port with RJ-11 connector

yEthernet Extender port auto senses the speed of

1/3/5/10/15/20/25/30/40/50Mbps

yOne DIP switch for configuring Ethernet Extender local or remote mode

yStatus LEDs

yExternal AC to DC power adapter

yUsed as a stand-alone device

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

Ethernet Extender Mode Settings

Ethernet Extender mode settings are made very simple by means of a

switch at the rear panel of the Ethernet Extender. The switch has two

positions for Ethernet Extender mode settings. Refer to the table below for

more details. One device must be set to Loc and the other to Rmt when two

devices are connected.

Loc Rmt

The device operates in local mode The device operates in remote mode

Connecting to Power

This Ethernet Extender is a plug-and-play device. Connect the supplied AC

to DC power adaptor to the receptacle on the rear panel of the Ethernet

Extender, and then attach the plug into a standard AC outlet.

Front Panel & LEDs

The LED indicators give you instant feedback on status of the Ethernet

Extender:

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

LEDs State Indication

Steady Power on

Pwr stands for POWERPwr Off Power off

Ethernet

Steady A valid Ethernet connection established

Lnk stands for LINK

Flashing Transmitting or receiving Ethernet data

Act stands for ACTIVITY

Lnk/Act

Off Neither valid Ethernet connection established nor transmitting/receiving Ethernet

data

Steady Ethernet Connection in full duplex mode

Fdx stands for FULL-DUPLEX

Fdx Off Ethernet Connection in half-duplex mode

Ethernet Extender

Green The Ethernet Extender port transmitting/receiving at 1Mbps, up to 1900M

1 Amber The Ethernet Extender port transmitting/receiving at 3Mbps, up to 1800M

Green The Ethernet Extender port transmitting/receiving at 5Mbps, up to 1600M

2 Amber The Ethernet Extender port transmitting/receiving at 10Mbps, up to 1400M

Green The Ethernet Extender port transmitting/receiving at 15Mbps, up to 1200M

3 Amber The Ethernet Extender port transmitting/receiving at 20Mbps, up to 1000M

Green The Ethernet Extender port transmitting/receiving at 25Mbps, up to 800M

4 Amber The Ethernet Extender port transmitting/receiving at 30Mbps, up to 700M

4 + 2 Amber The Ethernet Extender port transmitting/receiving at 40Mbps, up to 600M

4 + 3 Amber The Ethernet Extender port transmitting/receiving at 50Mbps, up to 300M

Rmt Steady The device operates in remote mode

Loc Steady The device operates in local mode

Err Steady Error occurred

Lnk Steady A valid connection established

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

Preface

This manual describes how to install and use the LB300A-R3, Ethernet

Extender. The Ethernet Extender introduced here provides one channel for

Ethernet over existing voice grade copper wire.

The Ethernet Extender fully complies with IEEE 802.3 10BaseT and IEEE

802.3u 100BaseTX standards.

In this manual, you will find:

yProduct overview

yFeatures on the Ethernet Extender

yIllustrative LED functions

yInstallation instructions

ySpecifications

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

Table of Contents

Quick Start Guide...............................................................................................................................1

PRODUCT OVERVIEW ....................................................................................................................1

PRODUCT FEATURES ....................................................................................................................1

ETHERNET EXTENDER MODE SETTINGS.........................................................................................2

CONNECTING TO POWER...............................................................................................................2

FRONT PANEL &LEDS.................................................................................................................2

Preface ..............................................................................................................................................4

Table of Contents...............................................................................................................................5

Introduction........................................................................................................................................6

PRODUCT OVERVIEW ....................................................................................................................6

PRODUCT FEATURES ....................................................................................................................6

LB300A-R3 PACKING LIST ...........................................................................................................6

One-Channel Ethernet Extender........................................................................................................7

PORTS..........................................................................................................................................7

ETHERNET EXTENDER MODE SETTINGS.........................................................................................7

FRONT PANEL &LEDS.................................................................................................................7

Installation........................................................................................................................................10

SELECTING A SITE FOR THE EQUIPMENT......................................................................................10

CONNECTING TO POWER.............................................................................................................10

Specifications...................................................................................................................................12

Introduction

The LB300A-R3 Ethernet Extender provides one channel for Ethernet over

existing voice grade copper wire. It can be used as a stand-alone device.

Product Overview

Product Features

yOne 10/100BaseTX (TX) Ethernet port with RJ-45 connector

yAuto negotiation of speed and duplex mode on TX port

yAuto MDIX on TX port

yComplies with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX

standards

yOne Ethernet Extender port with RJ-11 connector

yEthernet Extender port auto senses the speed of

1/3/5/10/15/20/25/30/40/50Mbps

yOne switch for configuring Ethernet Extender local or remote mode

yStatus LEDs

yExternal AC to DC power adapter

yUsed as a stand-alone device

<Note> Please don’t connect RJ-11 connector of Ethernet Extender to

public switched telephone system.

LB300A-R3 Packing List

When you unpack this product package, you will find the items listed below.

Please inspect the contents, and report any apparent damage or missing

items immediately to our authorized reseller.

yThe LB300A-R3 Ethernet Extender

yUser’s Manual

yAC to DC Power Adaptor

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

One-Channel Ethernet Extender

Ports

The Ethernet Extender provides one TX port and one Ethernet Extender

port.

For the TX port, it uses RJ-45 connector and auto senses the speed of

10/100Mbps.

For the Ethernet Extender port, it uses RJ-11 connector and auto senses

the speed of 1/3/5/10/15/20/25/30/40/50Mbps.

Ethernet Extender Mode Settings

Ethernet Extender mode settings are made very simple by means of a 2

position switch at the rear panel of the Ethernet Extender.

Mode switch

There is one position on the Mode switch for Ethernet Extender mode

settings. Refer to the table below for more details. One end must be set to

Loc and the other to Rmt when two devices are connected.

Loc Rmt

The device operates in local mode The device operates in remote mode

Front Panel & LEDs

LED Indicators

The LED indicators give you instant feedback on status of the Ethernet

Extender:

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:

SUPPORT 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:

INFORMATION Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web Site: www.blackbox.com yE-mail: info@blackbox.com

LEDs State Indication

Steady Power on

Pwr stands for POWER

Pwr Off Power off