Billion BiPAC 5210S Manual de usuario

BiPAC 5210S

Dual-Port

ADSL2+ Modem/Router

User’s Manual

Chapter 1 ................................................................................................ 1

1.1 Introducing the BiPAC 5210S ................................................1

1.2 Features of the BiPAC 5210S................................................3

Chapter 2 ................................................................................................ 6

2.1 Important note for using the BiPAC 5210S............................6

2.2 Package Contents .................................................................6

2.3 The Front LEDs .....................................................................7

2.4 The Rear Ports ......................................................................8

2.5 Cabling ..................................................................................9

Chapter 3 .............................................................................................. 10

3.1 Before Configuration............................................................10

3.2 Factory Default Settings ......................................................23

3.3 LAN and WAN PortAddresses............................................24

3.4 Information from your ISP....................................................24

3.5 Configuring with your Web Browser ....................................25

Chapter 4 .............................................................................................. 26

4.1 Quick Start...........................................................................27

4.2 Interface Setup ....................................................................32

4.3 Advanced Setup...................................................................38

4.4 Access Management ...........................................................47

4.5 Maintenance........................................................................53

4.6 Status...................................................................................58

Chapter 5 .............................................................................................. 63

APPENDIX.............................................................................................65

Chapter 1

Introduction the BiPAC 5210S

1.1 Introducing the BiPAC 5210S

Welcome to the BiPAC 5210S. Your router is an “all-in-one” unit, combining an ADSL

modem, ADSLrouter and Ethernet network switch, providing everything you need to get the

machines on your network connected to the Internet over your ADSLbroadband connection.

The BiPAC 5210S complies with ADSL2+ standards for worldwide deployment and supports

downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It is designed for

small office, home office and residential users, enabling even faster speed Internet

connections. User can enjoy ADSLservices and broadband multimedia applications such as

interactive gaming, video streaming and real-time audio much easier and faster than ever

before.

The product supports PPPoA (RFC 2364 – PPP (Point-to-Point Protocol) over ATM

Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over

Ethernet (RFC 2516), and IPoA (RFC1577) to establish a connection with ISP. The product

also supports VC-based and LLC-based multiplexing.

It is the perfect solution to connect a small group of PCs to a high-speed broadband Internet

connection. Multi-users can have high-speed Internet access simultaneously.

This product also serves as an Internet firewall, protecting your network from being

accessed by outside users. Not only provide the natural firewall function (NetworkAddress

Translation, NAT), it also provides rich firewall features to secure user’s network.All

incoming data packets are monitored and filtered. Besides, it can also be configured to

block internal users from accessing to the Internet.

The product provides two levels of security support. First, it masks LAN users’IPaddresses

which are invisible to outside users on the Internet, making it much more difficult for a hacker

to target a machine on your network. Secondly, it can block and redirect certain ports to limit

the services that outside users can access. For example, to ensure that games and other

Internet applications will run properly, user can open some specific ports for outside users to

access internal services in network.

Integrated DHCP (Dynamic Host Control Protocol) services, client and server, allow multiple

users to get their IP addresses automatically on boot up from the product. Simply set local

machines as a DHCP client to accept a dynamically assigned IP address from DHCP server

and reboot. Each time local machine is powered up; the router will recognize it and assign

an IP address to instantly connect it to theLAN.

For advanced users, Virtual Service function allows the product to provide limited visibility to

local machines with specific services for outside users. An ISP (Internet Service Providers)

provided IP address can be set to the product and then specific services can be rerouted to

specific computers on the local network. For instance, a dedicated web server can be

connected to the Internet via the product and then incoming requests for HTML that are

received by the product can be rerouted to the dedicated local web server, even though the

server now has a different IP address. In this example, the product is on the Internet and

vulnerable to attacks, but the server is protected.

Virtual Server can also be used to re-task services to multiple servers. For instance, the

product can be set to allow separated FTP, Web, and Multiplayer game servers to share the

same Internet-visible IP address while still protecting the servers and LAN users from

hackers.

1.2 Features of the BiPAC 5210S

ADSL Multi-Mode Standard

supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It

also supports rate management that allowsADSL subscribers to select an Internet

access speed suiting their needs and budgets. It is compliant with Multi-Mode standard

(ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2)), G.hs (G994.1), G.dmt.bis

(G.992.3), G.dmt.bisplus (G.992.5)). The Annex Aand B are supported in different H/W

platforms.

Fast Ethernet Switch

A 10/100Mbps fast Ethernet switch is built in with automatic switching between MDI

and MDI-X for 10Base-T and 100Base-TX ports. An Ethernet straight or cross-over

cable can be used directly for auto detection.

Multi-Protocol to Establish A Connection

Supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483

encapsulation overATM (bridged or routed), PPP over Ethernet (RFC 2516) and IPoA

(RFC1577) to establish a connection with the ISP. The product also supports

VC-based and LLC-based multiplexing.

Quick Installation Wizard

Supports a WEB GUI page to install this device quickly. With this wizard, end users can

enter the information easily which they get from their ISP, then surf the Internet

immediately.

Universal Plug and Play (UPnP) and UPnP NAT Traversal

This protocol is used to enable simple and robust connectivity among stand-alone

devices and PCs from many different vendors. It makes network simple and affordable

for users. UPnP architecture leverages TCP/IP and the Web to enable seamless

proximity networking in addition to control and data transfer among networked devices.

With this feature enabled, users can now connect to Net meeting or MSN Messenger

seamlessly.

Network Address Translation (NAT)

Allows multi-users to access outside resources such as the Internet simultaneously

with one IP address/one Internet access account. Many application layer gateway

(ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News,

Net2phone, Ping, NetMeeting, IP phone and others.

Firewall

Supports simple firewall with NAT technology and provides option for blocking access

from Internet, like Telnet, FTP, TFTP, WEB, SNMP and IGMP.

Domain Name System (DNS) relay

Provides an easy way to map the domain name (a friendly name for users such as

www.yahoo.com) and IP address. When a local machine sets its DNS server with this

router’s IP address, every DNS conversion request packet from the PC to this router

will be forwarded to the real DNS in the outside network.

Dynamic Domain Name System (DDNS)

The Dynamic DNS service allows you to alias a dynamic IP address to a static

hostname. This dynamic IP address is the WAN IP address. For example, to use the

service, you must first apply for an account from a DDNS service like

http://www.dyndns.org/.

PPP over Ethernet (PPPoE): Provides embedded PPPoE client function to establish a

connection. Users can get greater access speed without changing the operation

concept, sharing the same ISP account and paying for one access account. No PPPoE

client software is required for local computer. The Automatic Reconnect and Disconnect

Timeout (Idle Timer) functions are provided, too.

Virtual Server: User can specify some services to be visible from outside users. The

router can detect incoming service request and forward it to the specific local computer

to handle it. For example, user can assign a PC in LAN acting as WEB server inside and

expose it to the outside network. Outside user can browse inside web server directly

while it is protected by NAT. A DMZ host setting is also provided to a local computer

exposed to the outside network, Internet.

Users can specify some services to be visible from outside users. The router can

detect incoming service requests and forward either a single port or a range of ports to

the specific local computer to handle it. For example, a user can assign a PC in the

LAN acting as a WEB server inside and expose it to the outside network. Outside users

can browse inside web servers directly while it is protected by NAT. ADMZ host setting

is also provided to a local computer exposed to the outside network, Internet.

Dynamic Host Configuration Protocol (DHCP) client and server

In the WAN site, the DHCP client can get an IP address from the Internet Service

Provider (ISP) automatically. In the LAN site, the DHCP server can allocate a range of

client IP addresses and distribute them including IP address, subnet mask as well as

DNS IP address to local computers. It provides an easy way to manage the local IP

network.

RIP1/2 Routing

Supports RIP1/2 routing protocol for routing capability.

Simple Network Management Protocol (SNMP)

It is an easy way to remotely manage the router via SNMP.

Web based GUI

Supports web based GUI for configuration and management. It is user-friendly and

comes with on-line help. It also supports remote management capability for remote

users to configure and manage this product.

Firmware Upgradeable

Device can be upgraded to the latest firmware through the WEB based GUI.

Chapter 2

Installing the BiPAC 5210S

2.1 Important note for using the BiPAC 5210S

Warning

 Do not use the BiPAC 5210S in high humidity or high

temperatures.

 Do not use the same power source for the BiPAC 5210S as

other equipment.

 Do not open or repair the case yourself. If the BiPAC 5210S is

too hot, turn off the power immediately and have it repaired a

a qualified service center.



void usin

this

roduct and all accessories outdoors.

Attention

 Place the BiPAC 5210S on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

2.2 Package Contents

BiPAC 5210S ADSL2+ Modem/Router

CD-ROM containing the online manual

RJ-11 ADSL/telephone Cable (1.8M)

Ethernet (CAT-5 LAN) Cable (2M Straight)

USB Cable (1.5M)

AC-AC power adapter (12V AC, 1A)

Quick Start Guide (105*150*mm)

2.3 The Front LEDs

LED Meaning

1 PPP : Lit steady when there is a PPPoA / PPPoE connection.

2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”)

3 USB: Lit when the USB port is connected to the PC and working properly

4 LAN Port :

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

5 SYS : Lit when the system is ready.

6 PWR : Lit when power is ON.

2.4 The Rear Ports

Port Meaning

1 Power Switch Power ON/OFF switch

2 POWER Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

4 LAN Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the LAN ports

when connecting to a PC or an office/home network of 10Mbps or

100Mbps.

5 USB Connect the supplied USB cable to this port when connecting to the

6 ADSL Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

Otros manuales para BiPAC 5210S

Tabla de contenidos

Otros manuales de Enrutador de red de Billion

Billion

Billion BIPAC 6600 Manual de usuario

Billion

Billion BiPAC 7404V(G)OX/V(G)PX Manual de usuario

Billion

Billion BiPAC 7402NXL Manual de usuario

Billion

Billion BiPAC 5100 Manual de usuario

Billion

Billion BiPAC 6300NXL Manual de usuario

Billion

Billion BiPAC 5200G R4 Series Manual de usuario

Billion

Billion BiPAC 7301VGP Manual de usuario

Billion

Billion BiPAC 7560G Manual de usuario

Billion

Billion BiPAC 7402 Manual de usuario

Billion

Billion ADSL Modem / Router BIPAC-711C2 Manual de usuario

Billion

Billion BEC MX-1000 Manual de usuario

Billion

Billion BiPAC 5100S Manual de usuario

Billion

Billion BiPAC 7404VGOX Manual de usuario

Billion

Billion BiPAC 8500 Manual de usuario

Billion

Billion BiPAC 7401V(G)P R4 Manual de usuario

Billion

Billion BIPAC-7402 Manual de usuario

Billion

Billion BiPAC 7401V(G)PX Manual de usuario

Billion

Billion BiPAC 7402NX Manual de usuario

Billion

Billion BiPAC 8700NEXL R2 Manual de usuario

Billion

Billion BiPAC 8700AX-1600 Manual de usuario

Billion

Billion BiPAC 2070 (P) Manual de usuario

Billion

Billion BiPAC 5200G Series Manual de usuario

Billion

Billion BiPAC 7800(N) Manual de usuario

Billion

Billion BiPAC 7300N Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario