Beta Prusa DualX Manual de usuario

Assembly Instructions Beta Prusa DualX 13/05/14

Assembly Instructions

Beta Prusa DualX

3D Printer

Version 2.6

Date 13/05/14

Pa e 1 / 72

Assembly Instructions Beta Prusa DualX 13/05/14

General data about the assembly instructions for an incomplete machine

according to appendix VI of the EG machinery directi e 2006/42/EG

Manufacturer:

Wen er & Krautwasser GbR - 2PrintBeta

Reisstrasse 5

78467 Konstanz

Description of the machine:

Identification: Beta Prusa 3D printer

Type: DualX with two printheads

Year: 2014

Conditions that must be met for the incomplete machine so that it can properly, and

without compromisin the safety and health of peoples, be assembled with other

parts to form a complete machine:

Condition 1: Let an expert check the electrical connections of the machine.

Information over the undersi ned:

Name: Dominik Wenger

Function: Shareholder Wenger & Krautwasser GbR

11. 4.2 14

_________________________________________

Date, Signature

This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Germany License.

Pa e 2/ 72

Assembly Instructions Beta Prusa DualX 13/05/14

Con ratulations on purchasin a Beta Prusa 3D Printer!

Please read the followin assembly instructions carefully and keep the document on a safe

place. Please follow carefully all instructions and lookout for the warnin symbols.

Table of Contents

SAFETY INSTRUCTIONS....................................................................................................................................4

ASSEMBLY OF THE FRAME..............................................................................................................................5

STEP 1.1

.................................................................................................................................................................

STEP 1.2

.................................................................................................................................................................

STEP 1.3

.................................................................................................................................................................

STEP 1.4

...............................................................................................................................................................

STEP 1.5

...............................................................................................................................................................

STEP 1.6

...............................................................................................................................................................

STEP 1.7

...............................................................................................................................................................

STEP 1.8

...............................................................................................................................................................

STEP 1.9

...............................................................................................................................................................

ASSEMBLY OF THE AXES................................................................................................................................18

STEP 2.1

...............................................................................................................................................................

STEP 2.2

...............................................................................................................................................................

STEP 2.3

...............................................................................................................................................................

STEP 2.4

...............................................................................................................................................................

STEP 2.5

...............................................................................................................................................................

STEP 2.6

...............................................................................................................................................................

STEP 2.7

...............................................................................................................................................................

ASSEMBLY OF THE EXTRUDERS..................................................................................................................35

STEP 3.1

...............................................................................................................................................................

STEP 3.2

...............................................................................................................................................................

STEP 3.3

...............................................................................................................................................................

STEP 3.4

...............................................................................................................................................................

ASSEMBLY OF PRINT BED AND EXTRAS....................................................................................................42

STEP 4.1

...............................................................................................................................................................

STEP 4.2

...............................................................................................................................................................

STEP 4.3

...............................................................................................................................................................

ASSEMBLY OF THE ELECTRONICS..............................................................................................................48

STEP 5.1

...............................................................................................................................................................

STEP 5.2

...............................................................................................................................................................

STEP 5.3

...............................................................................................................................................................

STEP 5.4 (OPTIONAL)

...........................................................................................................................................

STEP 5.5 (OPTIONAL)

...........................................................................................................................................

Pa e 3/ 72

Assembly Instructions Beta Prusa DualX 13/05/14

Safety Instructions

Only assemble a Beta Prusa 3D printer accordin to the assembly instructions written here.

Please take notice of the followin Symbols and Notices. They are structured into dan er

levels accordin to ISO 3864-2.

DANGER

Refers to an imminent Danger.

If the information is not followed, it can result in death or serious injury

(in alidity).

Indicates a possible dangerous situation.

If the information is not followed, it can result in death or serious injury

(in alidity).

ATTENTION

Indicates a potentially dangerous situation.

If the information is not followed, damage to property or light to

medium personal injuries are possible.

NOTICE

Indicates general notes, useful operator tips and operating

recommendations which do not affect the safety and health of

personnel.

Pa e 4/ 72

WARNING

Assembly Instructions Beta Prusa DualX 13/05/14

Chapter I

Assembly of the Frame

Pa e 5 / 72

Assembly Instructions Beta Prusa DualX 13/05/14

Step 1.1

Needed parts for step 1.1

The followin parts are needed for this step:

2x Frame vertex with foot

1x Bar clamp

6x Washer M8

6x Nut M8

1x Threaded rod M8 x 370 mm

Assembly Step 1.1

Assemble the bar clamp between two frame vertices like its shown in the picture above.

Don't completely fasten the nuts yet.

Pa e 6/ 72

Assembly Instructions Beta Prusa DualX 13/05/14

Step 1.2

Needed parts for step 1.2

The followin parts are needed for this step:

1x Pre-assembled part from step 1.1

1x Frame vertex without foot

8x Washer M8

8x Nut M8

2x Threaded rod M8 x 370 mm

Assembly Step 1.2

Pa e 7/ 72

Assembly Instructions Beta Prusa DualX 13/05/14

Connect the part from step 1.1 with the frame vertex and the rods to a trian le.

Make sure that all sides of the trian le are exactly the same len th. The distance between

the outer ed es of the plastic parts should be 291 mm.

Repeat the previous two steps and build a second trian le.

NOTICE

Make sure all sides of both triangles are exactly the same length.

Now fasten all nuts on the frame vertices.

Assembly of step 1.2 repeated

Pa e 8/ 72

Assembly Instructions Beta Prusa DualX 13/05/14

Step 1.3

Needed parts for step 1.3

The followin parts are needed for this step:

4x Washer M8

4x Nut M8

1x Threaded rod M8 x 294 mm

Assembly Step 1.3

Position the nuts and washer on the threaded rod as shown in the picture above.

Pa e 9/ 72

Assembly Instructions Beta Prusa DualX 13/05/14

Step 1.4

Needed parts for step 1.4

The followin parts are needed for this step:

1x Belt uide

2x Bar clamp

10x Washer M8

2x Bi Washer M8

8x Nut M8

1x Bearin 608ZZ

1x Threaded rod M8 x 294 mm

Bearing 608zz in belt guide

Press the 608ZZ bearin into the belt uide until it's in the middle of the uide.

Assembly step 1.4

Position the parts on the threaded rod as shown in the picture above.

Pa e 10/ 72

Tabla de contenidos

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario