Behringer DIGITAL REVERB/DELAY DR400 Manual de usuario

DIGITAL REVERB/DELAY DR400

Digital Stereo Reverb/Delay Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL REVERB/

DELAY DR400. This Reverb/Delay eects pedal delivers 24-bit high-resolution stereo reverb and

delay eects. Experience state-of-the-art sounds comparable to studio processors in one compact pedal.

1. Controls

(4) (1)

(3)

(8)

(6)

(7)

(5) (2)

(1) Select the eect mode via the MODE

switch (see table below).

(2) Depending on the selected mode,

this knob adjusts the reverb time or

the delay time.

(3) Use the ¼" TS IN connector to plug in

the instrument cable.

(4) The BALANCE control determines

the balance between the direct

(dry instrument) signal and the

eect sound.

(5) In REVERB mode, this knob adjusts

the reverbs’ tonal character. In delay

and DLY+rev mode, this knob

adjusts the amount of feedback

(number of repetitions).

(6) The two ¼" TS connectors OUT A and OUT B send the signal to your amp or other eects devices.

Use both connectors if you want to achieve a full stereo eect. For mono use, just plug in OUT A.

(7) The ON/BATT LED illuminates when the eect is activated. It also serves as a

battery level indicator.

(8) Use the foot switch to activate/deactivate the eect. When pressing the foot switch

2 seconds or longer, you can tap in the delay time (ON/BATT LED ashes).

(9) Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

1Eect description 2 3 8

DELAY

1Short delay (32 - 128 ms) Delay time Feedback

Tap delay time

2Medium delay (128 - 500 ms) Delay time Feedback

3Long delay (500 - 2000 ms) Delay time Feedback

DLY + REV

4Delay+small room (32 - 2000 ms) Delay time Feedback

5Delay+big room (32 - 2000 ms) Delay time Feedback

6Delay+concert hall (32 - 2000 ms) Delay time Feedback

7Delay+reverb plate (32 - 2000 ms) Delay time Feedback

REVERB

8Simulates the reverb of a small room Reverb time Tone

—

9Simulates the reverb of a big room Reverb time Tone

10 Simulates the reverb of a concert hall Reverb time Tone

11 Simulates the sound of a reverb plate Reverb time Tone

DIGITAL REVERB/DELAY DR400

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALLTRADEMARKS ARE THE PROPERTY OFTHEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHERWHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUTTHE EXPRESS

Tortola, BritishVirgin Islands

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊ The DR400 has no On/O switch. It is operable as soon as you insert a plug into the

IN connector. Disconnect the plug, if you don’t use the DR400. In doing so, you can

extend the life time of the battery.

The SERIAL NUMBER is located at the underside.

◊ In rare cases interferences of the normal function may appear by external inuence

(e.g. electrostatic discharge), as for example sound disturbances or malfunctions.

If this occurs, please turn down the volume on subsequent ampliers and disconnect

the input connector briey to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

Connector ¼" TS

Impedance 500 kΩ

Out A

Connector ¼" TS

Impedance 1 kΩ

Out B

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

China/Korea 220 V~, 50/60 Hz

Europe/U.K./ 230 V~, 50 Hz

Australia

Japan 100 V~, 50 - 60 Hz

Power connector 2 mm DC jack,

negative center

Battery 9 V type 6LR61

Power consumption 65 mA

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

Tabla de contenidos

Otros manuales de Pedal de música de Behringer

Behringer

Behringer HEAVY DISTORTION HD300 Manual de usuario

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Manual de usuario

Behringer

Behringer Flanger Machine FL600 Manual de usuario

Behringer

Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Instrucciones de instalación

Behringer

Behringer PHASER PH9 Manual de usuario

Behringer

Behringer V-Tone Acoustic ADI21 Manual de usuario

Behringer

Behringer DIGITAL DELAY DD600 Manual de usuario

Behringer

Behringer VINTAGE DISTORTION VD1 Manual de usuario

Behringer

Behringer HEAVY DISTORTION HD300 Manual de usuario

Behringer

Behringer MIDI FOOT CONTROLLER FCB1010 Manual de usuario

Behringer

Behringer Ultra Bass Chorus BUC400 Manual de usuario

Behringer

Behringer Ultra Octaver UO300 Manual de usuario

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Manual de usuario

Behringer

Behringer Bass Chorus BCH100 Manual de usuario

Behringer

Behringer NOISE REDUCER NR100 Manual de usuario

Behringer

Behringer Ultra Tremolo/PAN TP300 Manual de usuario

Behringer

Behringer Foot Controller FCV100 Manual de usuario

Behringer

Behringer FLANGER MACHINE FL600 Manual de usuario

Behringer

Behringer HELLBABE HB01 Manual de usuario

Behringer

Behringer SUPER PHASE SHIFTER SP400 Manual de usuario

Behringer

Behringer ULTRA CHORUS UC200 Manual de usuario

Behringer

Behringer VINTAGE DISTORTION VD1 Manual de usuario

Behringer

Behringer DC9 Manual de usuario

Behringer

Behringer HELLBABE HB01 Manual de usuario

Manuales populares de Pedal de música de otras marcas

Whirlwind

Whirlwind oc-bass Manual de usuario

Strymon

Strymon Lex-rotary Manual de usuario

Lexicon

Lexicon MX200 Manual de usuario

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manual de usuario

Matthews Effects

Matthews Effects Whaler V2 Manual de usuario

Grid 1

Grid 1 Pedal Jeanie Manual de usuario

Amptweaker

Amptweaker tightboost Manual de usuario

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manual de usuario

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manual de usuario

BYOC

BYOC Analog Chorus Manual

Dimavery

Dimavery EPVP-50 Manual de usuario

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manual de usuario

Pro-MIDI

Pro-MIDI G25 Manual de usuario

DW 7000 Manual de usuario

FAMC

FAMC Liquid-Foot Jr. Series Manual de usuario

Dimavery

Dimavery EPOD-50 Overdrive Manual de usuario

TREX

TREX ToneBug Totenschläger Manual de usuario

BBE

BBE ORANGE SQUASH Manual de usuario