Behringer DIGITAL DELAY DD600 Manual de usuario

(1) Select the eect mode via the MODE

switch (see table below).

(2) Use the D.TIME control to ne-tune the

delay time. The delay time describes

how fast the signal repetitions will

follow after the original signal.

Depending on the selected mode,

you can adjust it between 1 ms and

2000 ms. In HOLD and TEMPO modes,

D.TIME is disabled.

(3) The F.BACK (feedback) control adjusts

the amount of signal repetitions.

In HOLD mode, F.BACK is disabled.

(4) LEVEL adjusts the eect level.

(5) Use the ¼" TS IN connector to plug in

the instrument cable.

(6) Use the ¼" TS TEMPO connector to

connect an external foot switch.

Use the foot switch to tap in the song

tempo (in TEMPO MODE).

(7) The ¼" TS OUT A connector sends a mono signal to your amp. In E/D mode, it sends the

eect signal only.

(8) Use the PAN OUT connector and OUT A to acheive a full stereo delay eect. In E/D mode,

it sends the dry signal only.

(9) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.

(10) Use the foot switch to activate/deactivate the eect. In HOLD mode, use the foot switch to start

and stop the recording. The signal is recorded while holding down the foot switch. Playback begins

immediately after releasing it.

DIGITAL DELAY DD600

Digital Stereo Delay/Echo Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL DELAY DD600.

This digital Delay eects pedal is designed to deliver 24-bit high-resolution stereo delay sounds

comparable to state-of-the-art studio processors. Thanks to its parameter controls, you’ll have

plenty of cool sounds at your disposal to handle every situation.

1. Controls

A50-00000-52317

(4)

(8)

(9)

(1)

(5)

(10)

(3) (2)

(7) (6)

MODE Eect Description D.Time

DELAY

Short delay 1-50 ms

2Short to medium delay 50-200 ms

3Medium to long delay 200-800 ms

4Long delay 800-2000 ms

5HOLD Record and playback your performance (Rec.time: max.2 s)

6REVERSE Signal is repeated in reverse 1000-2000 ms

7E/D Stereo delay using OUT A and PAN OUT 1-400 ms

TEMPO

Adds a quarter note

D.TIME disabled.

Tap tempo via external foot switch

9Adds an eighth note

10 Adds a dotted eighth note

11 Add a triplet

DIGITAL DELAY DD600

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARETHE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSONWHO RELIES EITHERWHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUTTHE EXPRESS

Tortola, British Virgin Islands

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

◊ The DD600 has no On/O switch. It is operable as soon as you insert a plug into the

IN connector. Disconnect the plug, if you don’t use the DD600. In doing so, you can

extend the life time of the battery.

The SERIAL NUMBER is located on the underside.

◊ In rare cases interferences of the normal function may appear by external inuence

(e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this

occurs, please turn down the volume on subsequent ampliers and disconnect the input

connector briey to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

Connector ¼" TS, 500 kΩ

Tempo

Connector ¼" TS, 500 kΩ

OUT A

Connector ¼" TS, 500 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

China, Korea 220 V~, 50/60 Hz

Europe/Australia 230 V~, 50 Hz

Japan 100 V~, 50 - 60 Hz

Power connector 2 mm DC jack,

center negative

Battery 9 V type 6LR61

Power consumption 70 mA

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

Tabla de contenidos

Otros manuales de Pedal de música de Behringer

Behringer

Behringer ULTRA CHORUS UC200 Manual de usuario

Behringer

Behringer ULTRA FEEDBACK/DISTORTION FD300 Manual de usuario

Behringer

Behringer ULTRA TREMOLO/PAN TP300 Manual de usuario

Behringer

Behringer SUPER FUZZ SF300 Manual de usuario

Behringer

Behringer DM100 Manual de usuario

Behringer

Behringer DIGITAL DELAY DD600 Manual de usuario

Behringer

Behringer Foot Controller FCV100 Manual de usuario

Behringer

Behringer ROTARY MACHINE RM600 Manual de usuario

Behringer

Behringer V-Tone Acoustic ADI21 Manual de usuario

Behringer

Behringer Bass Limiter Enhancer BLE100 Manual de usuario

Behringer

Behringer Digital Multi-FX FX600 Manual de usuario

Behringer

Behringer VINTAGE TUBE OVERDRIVE VT911 Manual de usuario

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Manual de usuario

Behringer

Behringer Vintage Phaser VP1 Manual de usuario

Behringer

Behringer AM100 Manual de usuario

Behringer

Behringer COMPRESSOR/LIMITER CL9 Manual de usuario

Behringer

Behringer HELLBABE HB01 Manual de usuario

Behringer

Behringer DIGITAL DELAY DD400 Manual de usuario

Behringer

Behringer DYNAMIC WAH DW400 Manual de usuario

Behringer

Behringer Vintage tube overdrive TO800 Manual de usuario

Behringer

Behringer VIRTUALIZER 3D FX2000 Manual de usuario

Behringer

Behringer ULTRA VIBRATO UV300 Manual de usuario

Behringer

Behringer ULTRA METAL UM300 Manual de usuario

Behringer

Behringer HELLBABE HB01 Manual de usuario

Manuales populares de Pedal de música de otras marcas

Whirlwind

Whirlwind oc-bass Manual de usuario

Strymon

Strymon Lex-rotary Manual de usuario

Lexicon

Lexicon MX200 Manual de usuario

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manual de usuario

Matthews Effects

Matthews Effects Whaler V2 Manual de usuario

Grid 1

Grid 1 Pedal Jeanie Manual de usuario

Amptweaker

Amptweaker tightboost Manual de usuario

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manual de usuario

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manual de usuario

BYOC

BYOC Analog Chorus Manual

Dimavery

Dimavery EPVP-50 Manual de usuario

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manual de usuario

Pro-MIDI

Pro-MIDI G25 Manual de usuario

DW 7000 Manual de usuario

FAMC

FAMC Liquid-Foot Jr. Series Manual de usuario

Dimavery

Dimavery EPOD-50 Overdrive Manual de usuario

TREX

TREX ToneBug Totenschläger Manual de usuario

BBE

BBE ORANGE SQUASH Manual de usuario