Be3D DeeGreen Manual de usuario

Installation and service

instructions, warranty

terms & conditions

DeeGreen

User Guide

Version 2.4

DeeGreen User Guide

- 2 -

DeeGreen User Guide

- 3 -

Contents

1. Contents ...................................................................................................................- 3 -

2. Technical parameters.............................................................................................- 4 -

3. Safety instructions..................................................................................................- 4 -

4. Package contents....................................................................................................- 6 -

5. Parts description.....................................................................................................- 7 -

6. Getting the printer ready for operation .............................................................- 9 -

7. Printer menu scheme .......................................................................................... - 11 -

8. Cleaning and support .......................................................................................... - 11 -

9. Filaments and spare parts .................................................................................. - 11 -

10. Warranty terms and conditions......................................................................... - 11 -

11. Authorized servicing............................................................................................ - 13 -

12. Contact details ..................................................................................................... - 17 -

DeeGreen User Guide

- 4 -

Technical parameters

Print technology

FFF (Fused Filament Fabrication)

Build volume

150 x 150 x 150 mm

Print accuracy

0.1 mm

Layer thickness

0.05 / 0.1 / 0.15 / 0.2 mm

Nozzle diameter

0.4 mm

Print speed

up to 90 mm / s

Printer control

Touchscreen

Interior lighting

LED

Supported material

PLA, Wood

Power source

230 V / 120 W

Noise level

70 dB

External dimensions

495 x 395 x 390 mm

Weight

22 kg

Inputs

USB, SD card

Safety instructions

Warranty void if damaged due to not following the instructions in this

User Guide

1. None of the printer components or accessories are suitable for

eating. Avoid eating anything delivered from be3D.

2. Spatula, which is part of the accessory box, is sharp. Beware of

cuts.

3. Mind the top lid limit switch. Its edges are sharp. Beware of cuts.

4. Damage caused by improper use, in contradiction with this User

Guide, or by violating the security instructions, is full

responsibility of the user.

5. This device is not suitable for children and must be operated by

persons over the age of 18, in all other instances, supervision of

an adult is required.

6. The device must not be left unattended whilst in operation.

7. Some parts of the printer operate at temperatures greater than

70°C! Danger of burns! Avoid any contact with hot parts.

8. Disabled people not able to fully operate the device must be

supervised by a technically qualified person.

9. Make sure the product is complete before use.

10. Danger of electric shock if not operated correctly.

DeeGreen User Guide

- 5 -

11. The printer is a heavy device. In order to avoid injury, or damage

to the printer, do not let it fall.

12. Disposal of the device must be performed in accordance with

correct environmental directions.

13. Keep the printer away from any flammable substances.

14. Install the printer in a place that is:

Dry and free from dust

A stable environment (temperature, humidity)

Well ventilated

Close to an easily accessible electrical supply

At a sufficient distance from objects that could cover the

ventilation shafts of the printer

At a sufficient distance from objects susceptible to heat (e.g.

curtains and drapery), also from splash able liquids and organic

gases (e.g. ammonia)

Out of direct sunlight

Without sudden temperature changes

At a sufficient distance from heating vents, ventilation and air-

conditioning systems

Attentions:

- Danger

- Read the instruction manual

- Before any manipulation, except of print task and print

preparation, pull the plug out of socket

- The device contains moving parts, it may cause crushing and

capturing

- Warning of hot surfaces, marked part of the product may

heat up dangerously

Certifications:

DeeGreen User Guide

- 6 -

In order to avoid interruption of the print task due to an ESD event, the

DeeGreen M3D0100 3D printer should not be touched during the printing

process. If an ESD occurs, the printer will restart. After this situation, it is

recommended to use the "parking position" button.

§ 15.21 Information to user

Warning:

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

§ 15.105 Information to user

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.

Package contents

1. 3D printer DeeGreen

2. Box with accessories

a. Power supply 24 V/5 A

b. USB cable

c. Printing material holder

d. Spatula for print bed cleaning and model removal

e. Glue-stick for print bed

f. CD with DeeControl software

g. User Manual DeeControl

h. User Guide DeeGreen

i. Set of 2 nozzles and nozzle tubes with service tool

3. SD card plugged into the printer slot

4. Speed Manual on the top of the printer

5. Power supply cable

DeeGreen User Guide

- 7 -

Parts description

DeeGreen User Guide

- 8 -

Print bed

DeeGreen User Guide

- 9 -

Getting the printer ready for operation

Unboxing

1. Make sure the printer is standing on a solid platform and is not

upside down.

2. Stand the printer so the protective foam can be accessed. Remove

the protection.

3. Take the printer out of the box. Use extra caution while doing so.

First, stand in front of the box and bend down at your knees. Keep

your back straight. Grab the printer from both sides at the bottom to

take it out. Pull the printer out very carefully and put it on a solid

surface, e.g. a desk.

4. Remove the plastic using your hands only. Avoid using scissors or any

other sharp items.

5. Take the top lid off.

6. Carefully remove the protective foam.

7. Cover the printer with the top lid and make sure that the lid fits.

8. Open the spool chamber (side door) and take out the foam.

9. Hold the box with both hands and take it out. Mind your fingers.

10. Check the accessories.

11. Now, follow the print preparation chapter

Print preparation

1. Place the spool holder inside the filament chamber

2. Unpack the glass print bed.

3. Use the glue stick to make a thin even layer on the glass print bed.

Then make another one in a different direction and allow it to dry

for a couple of minutes. Check if the final layer is straight without

any bumps. If not, wash and follow this step again.

4. Put the bed into the printing chamber. The three magnets have to

fit together with the three pins on the table inside the chamber.

Check if the bed is immovable.

5. Connect the printer with a power source.

6. Turn on the printer

7. Now, follow the Preparing your filament chapter.

Preparing your filament

1. Unpack the spool of filament.

2. Find the end of the plastic string and release it from the holes. Hold

the string at all times.

3. Cut off the string’s end using either scissors or a knife at under a 45-

degree angle. Do not allow the string to go loose.

4. Straighten up the last 5 cm of the string.

DeeGreen User Guide

- 10 -

5. Hang the spool on the spool holder. Do not let go of the end of the

string freed.

6. Now, follow the Filament installation chapter

Filament installation

1. Push the string end through the small box on the back of the spool

chamber, until it cannot go any further. You should use roughly 50

cm of the string to reach the print head.

2. Use the touch screen on the front of the printer to manage the

filament loading.

3. Go to Settings in the Main menu.

4. Choose Filament change.

5. Wait until the nozzle warms up and press Continue.

6. Select Feed in and press Continue and gently push the string in until

you notice that the extruder pulls it itself.

7. Wait to see if the nozzle extrudes the filament. If it does not, press

the Repeat button.

8. Clean the nozzle of the extruded plastic. MIND, THE NOZZLE IS

HOT!

9. Now, follow the Beginning printing chapter.

Beginning printing

1. Check the SD card is plugged in the SD card slot on the front of the

printer.

2. Check the print chamber door and top lid are closed.

3. Press the Print button in Main menu.

4. Choose a print task you would like to print.

5. Press the Print button.

6. Wait until the printer prints the first layer, check everything

worked.

After printing

1. Gently remove the glass print bed with the printout from the

printer.

2. Use the spatula to remove the printout from the glass. Take care of

the sharp edge of the spatula! Mind your hands!

3. Before the next printing, scrape the glass bed with the spatula to

achieve a flat surface of the glass without any bumps.

Tabla de contenidos

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario

be3D DeeGreen Manual de usuario

Manuales populares de Impresora 3D de otras marcas