AZZA PT-6SBT Manual de usuario

PT-6SBT

PENTIUM II

AT MAINBOARD

USER’S MANUAL

DOC NUMBER UM-SBT-E1 .................................................................PRINTED IN TAIWAN

SiS5600

PENTIUM II MAINBOARD

USER’S MANUAL

DOC NUMBER UM-SBT-O1.................................................................PRINTED IN TAIWAN

SiS5600 Pentium II AT MAINBOARD TABLE OF CONTENTS

TABLE OF CONTENTS

Chapter & Section Page

1. INTRODUCTION ...........................................................................................1-1

1.1 OVERVIEW .................................................................................................1-1

1.2 MAINBOARD LAYOUT ...........................................................................1-2

1.3 SPECIFICATIONS ......................................................................................1-3

2. INSTALLATION.............................................................................................2-1

2.1 UNPACKING ...............................................................................................2-1

2.2 AMAZING WAYS TO POWER ON THE PC SYSTEM........................2-2

2.3 POWER OFF THE PC SYSTEM..............................................................2-4

3. HARDWARE SETUP ....................................................................................3-1

3.1 INSTALLING THE DRAM MODULES................................................3-1

3.2 CONNECTORS............................................................................................3-2

3.3 JUMPERS .....................................................................................................3-15

4. AWARD BIOS SETUP .................................................................................4-21

4.1 GETTING STARTED ................................................................................4-21

4.2 MAIN MENU...............................................................................................4-22

4.3 CONTROL KEYS.......................................................................................4-22

4.4 STANDARD CMOS SETUP.....................................................................4-23

4.5 BIOS FEATURES SETUP ........................................................................4-24

4.6 CHIPSET FEATURES SETUP ................................................................4-27

4.7 POWER MANAGEMENT SETUP..........................................................4-32

4.8 INTEGRATED PERIPHERALS ..............................................................4-38

4.9 PNP/PCI CONFIGURATION ...................................................................4-41

4.10 LOAD SETUP DEFAULTS ....................................................................4-44

4.11 SUPERVISOR PASSWORD / USER PASSWORD ...........................4-45

4.12 IDE HDD AUTO DETECTION.............................................................4-46

4.13 SAVE & EXIT SETUP............................................................................4-47

4.14 EXIT WITHOUT SAVING.....................................................................4-48

SiS5600 Pentium II AT MAINBOARD

SOMETHING IMPORTANT !

¶TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

¶LOAD SETUP DEFAULTS

“LOAD SETUP DEFAULTS” is the function which will have the BIOS default

settings loaded into the CMOS memory, these default settings are the best-case

values that should optimize system performance and increase system stability .This

function will be necessitated when you receive this mainboard, or when the system

CMOS data is corrupted. Please refer to the Section 4-10 for the details.

¶DISCHARAGE CMOS DATA

Whenever you want to discharge the CMOS data or open the system chassis, Make

sure to disconnect the AC power first because there is always the 5V standby voltage

connected to this mainboard when using an ATX switching power supply. Without

disconnecting the AC power connector from the PC system, the mainboard may be

damaged by any improper action . Please refer to the Section 3-3 for details.

¶WAKE ON LAN

In order to support the Wake On LAN feature, the system requires a ATX type SPS

(switching power supply) and it must be able to provide at least 700 mA of driving

capability on the “5V standby” voltage. Please refer to the Section 3-3 for details.

¶WARNING !

The "Static Electricity" may cause damage to the components on the mainboard, In

order to avoid the damage to the mainboard accidentally, please discharge all static

electricity from your body before touching this mainboard.

¶NOTICE

The information contained in this manual is subject to change without notice.

IMPORTANT

In case that you make a wrong BIOS setup and you can not power on

the PC system, you may press and hold the "INSERT" key and then

press the PW button to turn the system power on. When you are using

such way to power on you PC system, the system BIOS will force the

PC system running at the slower speed and then you may trigger the

BIOS setup program and select the proper parameters for the

mainboard. ( such feature is valid for both AT and ATX power )

SiS5600 Pentium II AT MAINBOARD INTRODUCTION

1-1

1. INTRODUCTION

1.1 OVERVIEW

This mainboard is the AT form-factor with A.G.P. (Accelerated Graphics Port) and PCI

Local Bus on board, designed based on the SiS5600, SiS5595 system chipset. It is a

high performance Pentium™ II personal computer mainboard with 100MHz ultra high

Front Side Bus (FSB) frequency. It is designed for the high performance Pentium™ II

or Celeron™ processor 233 MHz, 266 MHz, 300 MHz, 333MHz, 366MHz, 400MHz,

450MHz and up to 500MHz. (The clock ratio selectable can be up to 8X on the board.)

The jumper-free feature is designed on the board and you don't have to make any

jumper or switch setting when installing the CPU. For example, when you are installing

the CPU onto the mainboard, the system board will detect the CPU type and decide the

proper Voltage. As for the CPU frequency, you can choose to have the system board

detect the CPU type and decide the frequency for you, or you may use the BIOS setup

program to select the CPU clock by yourself.

Two channels “PIO” and “Ultra DMA/33 Bus Master” mode PCI IDE ports, one

Floppy Disk control port, two high speed Serial ports (UARTs) and one multi-mode

Parallel port and supports PS/2™ mouse, IR and USB ports are built on the board..

The Pentium™ II and Celeron™ Processor are the 64-bit processors with RISC

technology, which offer several key features such as built-in 128/256KB/512KB L2

cache (some Celeron does not have L2 cache), 12-stage super-pipeline architecture, out

of order execution .... etc. In order to optimize of its performances, the 32-bit Operating

System (such as Windows® NT and OS/2™) and 32-bit applications are recommended.

The Accelerated Graphics Port (A.G.P.) on the mainboard is designed for AGP 3D

video display card. Unlike PCI-based display cards, the AGP technology provides

lightning data throughput to fully facilitate the 3-Dimensional and multimedia graphics

display. The data transfer rate on AGP can be up to 133Mhz and which is much faster

than the traditional 33MHz PCI VGA card.

SiS5600 Pentium II AT MAINBOARD INTRODUCTION

1-2

1.2 MAINBOARD LAYOUT

Mainboard Layout with Quick Installation

ISA SLOT

PCI SLOT

K/B

PCI SLOT

CN3

CN4

Battery

COM2

CN5

LPT

COM1

JP5~JP8

Select CPU clock ratio

Please refer to jumper setting

JP2, JP3,JP4

Select CPU clock

Please refer to jumper settings

CN6,CN7

USB

CN12

IR Port

CN2

PS/2 Mouse

CN13 CPU Fan

CN1

AT K/B

JP9 Clear CMOS

1-2: Normal Setting

2-3: Clear CMOS

CN14

AT Power

CN16

WOL

CN17 Chassis Fan

CAUTION!

Wrong type of USB cable will destroy

either the USB device or the M/B.

Please always handle the USB cable

carefully when installing USB devices.

DIMM 2

DIMM 1

DIMM 3

CN8 FDC CN9 IDE1

CN10 IDE2

SLOT1

AGP

CN15

ATX Power

G G SS

11 1

(Reset button)

(HDD LED)

(Turbo LED)

(Power SW)

“G” =GND,

“S” =Singal

(Sleep LED)

1234 5

KBLOCK

SPK

Connector

1 2 3 4

JP1 K/B OnNow sel.

PCI SLOT

SiS5600 Pentium II AT MAINBOARD INTRODUCTION

1-3

1.3 SPECIFICATION

¥CPU

Intel Pentium™ II processor and Celeron™ processor.

1. When the FSB clock is 66 MHz, it supports 233 MHz up to 533 MHz CPUs.

2. When the FSB clock is 100 MHz, it supports 350 MHz up to 500 MHz CPUs.

¥CPU VCC

Switching Voltage Regulator onboard, supports +1.30V DC ~ +3.5V DC Vcore.

Note : The CPU Core Voltage will be Detected and adjusted automatically by the

mainboard, so there is no jumper setting required to select the CPU

voltage.

¥WORD SIZE

Data Path : 8-bit, 16-bit, 32-bit, 64-bit

Address Path : 32-bit

¥PC SYSTEM CHIPSET

SiS5600 and SiS5595 system chipset.

¥SUPER I/O CHIPSET

FDC37C669

¥FRONT SIDE BUS FREQUENCY

66.6, 75, 83.3,,95, 100, 112, 124, 133MHz (Selected by system BIOS).

¥MEMORY

DRAM : Three 168 pin DIMM sockets onboard, support 3.3V SDRAM DIMM

modules. Max. memory size : 768MB

CACHE: 256KB or 512KB L2 Cache memory built-in Pentium™ II

processor.

0KB or 128KB L2 Cache memory in Celeron™ processor.

¥BIOS

AWARD System BIOS.

(2MB Flash ROM, supports Plug & Play, ACPI, DMI and Green functions).

¥EXPANSION SLOTS

AGP Slots : 32-bit x 1 (Supports 1x or 2x AGP graphics cards)

PCI Slots : 32-bit x 4 ( All Master/Slave, PCI 2.1 Compliant )

ISA Slots : 16-bit x 2 (One of the slot is PCI/ISA shared)

SiS5600 Pentium II AT MAINBOARD INTRODUCTION

1-4

¥POWER CONNECTOR

AT and ATX power connectors are both designed on the mainboard.

¥WOL PORTS

One WOL connector supports Wake-On-LAN

¥USB PORTS

Two Universal Serial Bus (USB) ports.

¥IDE PORTS

Two channels of Ultra DMA/33 Bus Master IDE ports, which will support up to 4

IDE devices like IDE hard disk, ATAPI CD-ROM etc. The IDE ports can be

programmed to support PIO Mode 4, DMA mode 2 and Ultra DMA/33.

¥SUPER I/O PORTS

1. Supports PS/2 Mouse connector, PS/2 Keyboard connector (optional) and AT

Keyboard connector.

2. Two high speed NS16C550 compatible serial ports (UARTs).

3. One SPP/EPP/ECP parallel port.

4. One Floppy Disk Control port.

¥IR PORT

One HPSIR and ASKIR or Fast IR (optional) compatible IR port.

¥HARDWARE MONITORING

1. Monitor the system voltages, CPU temperature, and two cooling fan speeds.

2. Supports LDCM (optional).

¥ACPI ( This feature is valid only when ATX power supply is connected )

Advanced Configuration and Power Interface (ACPI) function is strongly

recommended by PC’98 because it will let you have many additional features and

that will make your PC system becomes very friendly and convenient. Followings

are the ACPI features designed on the board:

1. Power on the system by panel-switch

2. Power on the system by RTC alarm

3. Power on the system by modem Ring-in signal

4. Power on the system by LAN signal.( Wake On LAN )

5. Power on the system by Keyboard (Optional).

6. Resumed by Modem ring-in, RTC alarm, .... etc..

7. Supports Full-On/Doze/Standby/Suspend operating modes.

8. Power off (soft-off) by OS (active with ATX SPS only) or Panel-switch.

SiS5600 Pentium II AT MAINBOARD INTRODUCTION

1-5

¥DIMENSION

4-layers PCB, 220mm x 240mm (Baby-AT Form-Factor)..

¥ENVIRONMENT LIMIT

1. Operating Temperature : 10to 40. (50to 104)

2. Required Airflow : 50 linear feet per minute across CPU.

3. Storage Temperature : - 40to 70. (- 40to 158)

4. Humidity : 0 to 90% non-condensing.

5. Altitude : 0 to 10,000 feet.

SiS5600 Pentium II AT MAINBOARD INSTALLATION

2-1

2. INSTALLATION

2.1 UNPACKING

The mainboard contains the following components in the package. Please inspect the

following contents and confirm that everything is there in the package. If anything is

missing or damaged, call your supplier for instructions before proceeding.

lThis mainboard.

lOne USER‘S MANUAL.

lOne Cable set for peripheral devices.

lOne Pentium™ II Processor Retention Mechanism (CPU Holder).

lOne CD diskette for device drivers and utility programs.

This mainboard contains electrostatic sensitive components and it can be easily

damaged by static electricity. So please leave it sealed in the original packing until

when installing.

A grounded anti-static mat is recommended when unpacking and installation. Please

also attached an anti static wristband to your wrist and have it grounded to the same

point as the anti-static mat.

After the opening of the mainboard carton, please observe the mainboard carefully to

make sure there is no shipping and handling damage before you can start to install the

PC system.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de AZZA

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario