Avenview HDM-C6MWIP-SET Manual de usuario

VIDEO WALLS VIDEO PROCESSORS

VIDEO MATRIX SWITCHES

EXTENDERS SPLITTERS WIRELESS

CABLES & ACCESSORIES

Control Your Video

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or

warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications

and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted

by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any

express or implied warranty, relating to its products are is strictly prohibited.

Model #: HDM-C6MWIP-SET

HDMI H.264 IP VIDEOWALL DECODER/ENCODER

OVER CAT/X WITH MATRIX MODE SUPPORT

Military Residential

Medical Aviation

Education Industrial

Corporate House Of Worship

www.avenview.com

Product Application & Market Sectors

TABLE OF CONTENTS

1. GETTING STARTED ..........................................................................................................................1

1.1 IMPORTANT SAFE GUARDS..............................................................................................................1

................................................................................................................1

1.2 SAFETY INSTRUCTIONS

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISIION (FCC) ........................... 2

2. INTRODUCTION ..............................................................................................................................3

.....................................................................................................................4 2.1 PACKAGE CONTENTS

2.2 BEFORE INSTALLATION ................................................................................................................... 4

2.3 APPLICATION DIAGRAM ..................................................................................................................5

2.4 PANEl DESCRIPTION .......................................................................................................................6

2.4.1 FRONT PANEL (SENDER/ENCODER, HDM-C6MWIP-S ...................................................6

2.4.2 REAR PANEL (SENDER/ENCODER, HDM-C6MWIP-S) ........................................................6

3. INSTALLATION (HDM-C6MWIP-SET) ..............................................................................................8

3.1 APPLICATION ....................................................................................................................................8

3.1.1 SOURCE SELECTION ..............................................................................................................8

3.1.2 IP MATRIX ................................................................................................................................8

4. PC CONFIGURATOR ......................................................................................................................9

5. SPECIFICATIONS .............................. .............................................................................................13

6. TROUBLESHOOTING ....................................................................................................................15

2.4.3 FROT PANEL (RECEIVER/DECODER, HDM-C6MWIP-R) ....................................................7

2.4.4 FRONT PANEL (RECEIVER/DECODER, HDM-C6MWIP-R) .................................................7

SECTION 1: GETTING STARTED

1.1 IMPORTANT SAFE GUARDS

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

What the warranty does not cover

•Any product, on which the serial number has been defaced, modified or removed.

•Damage, deterioration or malfunction resulting from:

•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to

follow instructions supplied with the product.

•Repair or attempted repair by anyone not authorized by us.

•Any damage of the product due to shipment.

•Removal or installation of the product.

•External causes to the product, such as electric power fluctuation or failure.

•u se of supplies or parts not meeting our specifications.

•Normal wear and tear.

•Any other causes which does not relate to a product defect.

•Removal, installation, and set-up service charges.

1.2 SAFETY INSTRUCTIONS

The Avenview HDM-C6MWIP-SET, HDMI H.264 IP Matrix Decoder/Encoder has been tested for conformance to safety

regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HDM-

C6MWIP-SET should be used with care. Read the following safety instructions to protect yourself from possible injury and to

minimize the risk of damage to the unit.

! Do not dismantle the housing or modify the module.

! Dismantling the housing or modifying the module may result in electrical shock or burn.

! Refer all servicing to qualified service personnel.

! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage

or other hazards

! keep the module away from liquids.

! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on

to the housing, unplug the module immediately.

! Have the module checked by a qualified service engineer before using it again.

! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

1. GETTING STARTED

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)

This equipment has been tested and found to comply with part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

Warning symbols Description

ONlY USE THE PROVIDED POWER CABLE OR POWER

ADAPTER SUPPLIED. DO NOT TAMPER WITH THE

ELECTRICAl PARTS. THIS MAY RESULT IN El ECTRICAL

SHOCK OR BURN.

DO NOT TAMPER WITH THE UNIT. DOING SO WIll

VOID THE WARRANTY AND CONTINUED USE OF

THE PRODUCT

THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.

PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON

A SURFACE, IT SHOULD BE IN A GROUNDED

ENVIROMENT.

2. INTRODUCTION

The Avenview HDM-C6MWIP-SET, HDMI H.264 IP Videowall/Matrix Decoder/Encoder delivers end-to-end streaming media

over IP networks. The HDM-C6MWIP-SET is composed of two units a Decoder and an Encoder. The Decoder H.264/

MPEG-4 AVC video compression format, it receives the encoded IP signal through LAN port and decodes video/audio signal

out through HDMI interface, it also supports stereo de-embeding and streaming resolutions up to 1920 x 1200@60Hz.

Point to Point - (Direct Connection with CAT5/6) - 330ft

Point to Multi - point with CAT5/6 requires a POE Network Switch which supports port based, IGMP v2.0 or above

protocol. For large application, we would recommend Cisco SG family and the Cisco Catalyst.

Videowall and Matrix Function – with CAT 5/6 cable without any signal loss add multiple Sources to multiple encoders

which links via LAN by cascading any POE Gigabit Ethernet switches up to 3 levels, to the decoder connected to the HD

Monitors at different locations on the Network. Transporting full HD 1080p video and internally H.264 video compression

adapts to available network bandwidth if needed while retaining vivid picture with PCM audio.

- NOTE: The QUALITY and TRANSMISSION of the video signals depends on the characteristics and quality of the UTP cables

and Network Infrastructure . We recommend any Network Switches with 1GB POE IGMP v2.0 support . Tested and configured

on the below models

FEATURES:

- Flexible PC,WEB GUI iPad control;

- CEC Function on the RX;

- Supports live IP video stream decoding 480p@60Hz to 1920 x 1200@60;

- Supports POE;

- Allows video previewing via iPad App and Windows 7 software 352x288@5Hz;

- Supports multiple interfaces HDMI, DVI signals over IP networks;

- Supports audio embedding and de-embedding;

- Built in-auto scaler;

- Supports H.264 features baseline profile, main profile and high profile;

- Supports H.264, TCP/IP, Telnet, UDP and IGMP;

- Support Telnet, WEB GUI control and 3rd Party control sytems API commands;

- Supports Auto IP, Zero-configuration networking (zeroconf)

- Seamless switching, no black screen, no frame lock.

- Configurable encoding bit rate up to 30 Mbps

- Auto input format detection

- HDCP compliant

Other features include:

www.avenview.com

2.1 PACKAGE CONTENTS

Before you start the installation of the HDMI Extender, please check the package contents.

1HDM-C6MWIP-SET

(HDM-C6MWIP-S)

(HDM-C6MWIP-R)

2Power Adapter (+12V DC 1A) + International Adapters X2

User Guide X 1

2.2 BEFORE INSTALLATION

•Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components

within the casing.

•Do not place the product in temperatures under 0˚C or over 50˚C. High humidity may also cause the unit to malfunction.

•Use the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this

may result in malfunction of the unit and may cause fire.

•Do not twist or pull by force the ends of the UTP cable. It will cause malfunction.

1 x Right and Left Ear Rack Sets X2

Phoenix Connector (Male, 3.5 mm, 3 pins) X 4

x2 Sender

x2 Receiver

www.avenview.com

2.3 APPLICATION DIAGRAM

www.avenview.com

2.4 PANEL DESCRIPTION

2.4.1 FRONT PANEL (Sender/Encoder, HDM-C6MWIP-S)

1. Power LED: Indicates if the unit is powered OFF or ON by a RED LED

2. Status LED: Steady Blue Light ON indicates unit is communicating properly. LED blinking waiting on Source

2.4.2 REAR PANEL (Sender/Encoder, HDM-C6MWIP-S)

HDMI IN: Connect to HDMI/DVI Source.

5. Stereo Audio OUT: Connects to an audio output

device such as an amplifier for audio de-embedding.

CAT5/6: Used for transporting video/audio streams to

Decoder RX units connected.

RS 232: RS-232 Data pass-through port for

receiving /sending commands to RS 232 devices.

1 2

45678

Power Jack: DC 12V 1A

Ground Screw: Ground connection prevent device

from voltage damage.

www.avenview.com

2.4.3 FRONT PANEL (Receiver/Decoder, HDM-C6MWIP-R)

1. Power LED: Indicates if the unit is powered OFF or ON by a RED LED.

2. Status LED: Steady Blue Light ON indicates unit is communicating properly. LED blinking waiting on Encoder.

2.4.4 FRONT PANEL (Receiver/Decoder, HDM-C6MWIP-R)

Ground Screw: Ground connection prevent device

from voltage damage.

Power: 12V 1A DC Power Jack.

Used for accepting video/audio streams from the

Encoder TX units connected.

HDMI OUT: Connect to HDMI Display.

Stereo Audio OUT: Connects to an audio output

device such as an amplifier for audio de-embedding.

RS 232 : RS-232 Data pass-through port for receiving

/sending commands to RS 232 devices.

345678

www.avenview.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de Avenview

Avenview

Avenview C-HDM-3GHDSDSDI Manual de usuario

Avenview

Avenview C-CVID-HDM Manual de usuario

Avenview

Avenview C-COMPVGA-HDMI Manual de usuario

Avenview

Avenview SC-HDM-HD42K Manual de usuario

Avenview

Avenview C-COMP-VGA Manual de usuario

Avenview

Avenview C-COMP-HDSDI Manual de usuario

Avenview

Avenview SPLIT-HDM2-T4K-2 Manual de usuario

Avenview

Avenview SPLIT-HDSDI-6-RS Manual de usuario

Avenview

Avenview DVI-VIDEOWALL-4X Manual de usuario

Avenview

Avenview SPLIT-DPDL-4A Manual de usuario

Avenview

Avenview C-HDM-COMP Manual de usuario

Avenview

Avenview C-COMPVGA-HDMI Manual de usuario

Avenview

Avenview C-DVIA-HDMI Manual de usuario

Avenview

Avenview SC-HDM2-HD42K-A Manual de usuario

Avenview

Avenview C-DVIA-HDM Manual de usuario

Avenview

Avenview VGA-C5-SP-12 Manual de usuario

Avenview

Avenview C-HDMI-DVIA Manual de usuario

Avenview

Avenview C-DVI-VGA Manual de usuario

Avenview

Avenview SPLIT-HDM2-T4K-4-V2 Manual de usuario

Avenview

Avenview SW-HVD-HDMA-4X1 Manual de usuario

Avenview

Avenview C-COMPVGA-HDM Manual de usuario

Avenview

Avenview MLT-EDGEPRO-2X2E Manual de usuario

Avenview

Avenview DVI-VIDEOWALL-9X Manual de usuario

Avenview

Avenview C-HDM-VGA Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario