Avenview HBT-C6POE-VGA-S Manual de usuario
Control Your Video
VIDEO WALL VIDEO PROCESSORS
MULTIVIEWERS DIGITAL SIGNAGE
EXTENDERS CONTROL CENTERS
SCALERS WIRELESS
HDBaseT VGA and Composite Scaler Over CAT5e/6/7
Transmitter with LAN Support
© 2015Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: HBT-C6POE-VGA-S
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ........................... ..................................................................................................3
4. PACKAGE CONTENTS .....................................................................................................................4
5. BEFORE INSTALLATION ...................................................................................................................4
7.3 REMOTE CONTROL .....................................................................................................................8
8. RS-232 PIN DEFINITIONS....................................................................................................................9
9. RS-232 COMMANDS............................................................................................................................10
...........................................................................................................................................12
10. OSD MENU
11. INPUT RESOLUTION SUPPORT..........................................................................................................14
3.FEATURES ....................................... ...................................................................................................3
6. APPLICATION DIAGRAM...................................................................................................................5
7. PANEL DESCRIPTION ...................................................................................................................6
7.1 INPUT PANEL (FRONT PANEL) .................................................................................................6
7.2 INPUT PANEL (REAR PANEL) .................................................................................................7
12. INSTALLATION ....................................................................................................................................15
13. GENERAL TROUBLESHOOTING .......................................................................................................15
14. SPECIFICATIONS .................................................................................................................................16
www.avenview.com Page 1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•External causes to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The HBT-C6POE-VGA-S has been tested for conformance to safety regulations and requirements, and has been certified
for international use. However, like all electronic equipments, the HBT-C6POE-VGA-S should be used with care. Read the
following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page 3
2. INTRODUCTION
The HBT-C6POE-VGA-S is an HDBaseT™ Transmitter Scaler that supports PC (VGA) or Composite Video (CV) input. It is
capable of scaling and switching video sources and sending the digital signal over CAT5e/6/7 cable to the Receiver at a distance
of up to 100 meters, along with an external audio input, 2-way IR, RS-232 and bidirectional LAN support. Control is via on-
panel buttons or IR remote control and there is an On-screen Display (OSD) providing selection and system information. The
HBT-C6POE-VGA-S provides a full range of output resolutions, from 640 up to 1080p and WUXGA (RB). The bidirectional
Power over Ethernet (PoE) function provides greater flexibility during installations.
• Supports PC/CV scaling to a full range of HDTV or PC resolutions up to 1080p and WUXGA (RB).
• Transmission of uncompressed data over a single CAT5e/6/7 cable up to 100m/328ft.
• 5Play™ convergence: Video and Audio, LAN serving, bidirectional Power over Ethernet (PoE) and Control (IR RS-232 bypass).
• Supports IR, Remote control, RS-232 (bypass) and on-panel controls.
• Provides bidirectional 24V DC power to or receive from compatible PoE Receiver through CAT5e/6/7 cable.
• Supports Ethernet transmission rates up to 100 Mbps.
• Supports NTSC and PAL formats for Composite Video input.
Note:
1. This system was tested with CAT6/23AWG cables, results may vary with cables of different specifications.
2. The PoE function is designed for powering compatible Receiver units only—non-PoE Receivers will need their own power
supply. Receivers from other brands may not be compatible.
3. DO NOT connect the LAN connection to the CAT5e/6/7 port. Doing so may cause a power shutdown and may damage the
device.
3.FEATURES
www.avenview.com Page 4
4. PACKAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
1HBT-C6POE-VGA-S X 1
2POWER ADAPTER 24V2.7A X1
USER’S MANUAL X 1
5. BEFORE INSTALLATION
•Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components
within the casing.
•Do not place the product in temperatures under 0˚C or over 50˚C. High humidity may also cause the unit to malfunction.
•Use the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this
may result in malfunction of the unit and may cause fire.
•Do not twist or pull by force the ends of the HDMI cable. It can cause malfunction.
3
www.avenview.com Page 5
6. APPLICATION DIAGRAM
www.avenview.com Page 6
7. PANEL DESCRIPTION
7.1 INPUT PANEL (HBT-C6POE-VGA-S) Front Panel
123 4 56
7
9
1. SERVICE:Reserved for manufacturer use only. 2. IR RECEIVER WINDOW:Receives only the IR signal
from the supplied remote control for this device only.
3. PC: Connect to a PC/Laptop source device with a D-Sub
15pin cable.
4. CV: Connect to a composite video source such as a
DVD/Video player.
5. AUDIO: Connect to an analog stereo (L/R) audio
source with a 3.5mm mini-jack cable.
6.MENU:This button enters the On-Screen Display
(OSD) menu.
INPUT (–) Button & CV/PC LED: Press the INPUT
(−) button to toggle between CV or PC inputs. When
in CV mode the LED will be lit, off when in PC mode.
7.−/+: Use these buttons to navigate down and up
in the on-screen menu.
8.
ENTER: Press to confirm selection.
9.
8
www.avenview.com Page 7
7.2 INPUT PANEL (HBT-C6POE-VGA-S) Back Panel
1. POWER LED: This LED will illuminate when the
device is connected to an active power supply.
2. DC 24V: Connect the 24 V DC power supply to the
unit and plug the adaptor into an AC outlet. Only one
unit requires powering if both the Transmitter and
Receiver are both PoE compatible.
3. RS-232 IN: Connect to a PC or RS-232 control system
with a D-Sub 9 pin male cable for the transmission of
RS-232 commands.
4. LAN: Connect to an active network for LAN serving.
When any compatible LAN equipped receivers are
connected, this allows the network access (including
internet access if available) to be shared between any
connected LAN equipped receivers. Connect any
Ethernet equipped device e.g. a Smart TV or games
console to the LAN port of a receiver for that device
to share the network/internet access.
23 4 5 6 7
1
5.IR Blaster: Connect the supplied IR Blaster cable for IR
signal transmission. Place the IR Blaster in direct line-of-
sight of the equipment to be controlled.
6.IR Extender: Connect the supplied IR Receiver cables
for IR signal reception. Ensure that remote being used is
within the direct lineof-sight of the IR Extender.
7.CAT5e/6/7 OUT: Connect to the Receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.
MODE LED: This LED will illuminate when the power is connected.
LINK LED: This LED will illuminate when connected to a Receiver unit
that is connected with a TV/monitor that is displaying the signal.
PANEL DESCRIPTION
Tabla de contenidos
Otros manuales de Convertidor de medios de Avenview
Avenview
Avenview SPLIT-3GHDSDI-4RS Manual de usuario
Avenview
Avenview C-HDMI-DVIA Manual de usuario
Avenview
Avenview SPLIT-HDM2-T4K-4-V2 Manual de usuario
Avenview
Avenview C-HDM-3GHDSDSDI Manual de usuario
Avenview
Avenview HDM-SWITCHPRO-VW4 Manual de uso y mantenimiento
Avenview
Avenview HDM-C6IP4K-SET Manual de usuario
Avenview
Avenview DVI-VIDEOWALL-9X Manual de usuario
Avenview
Avenview SC-HDM-HD42K Manual de usuario
Avenview
Avenview C-VGA-DVI Manual de usuario
Avenview
Avenview C-COMP-HDSDI Manual de usuario
Avenview
Avenview C-HDM-COMPVGA-A Manual de usuario
Avenview
Avenview SPLIT-HDSDI-6-RS Manual de usuario
Avenview
Avenview SC-HDM2-HD42K-A Manual de usuario
Avenview
Avenview HDM2-SPLITPRO-T4K Instrucciones de instalación
Avenview
Avenview C-HDMI-COMPVGA Manual de usuario
Avenview
Avenview C-COMPVGA-HDM Manual de usuario
Avenview
Avenview VGA-C5-SP-12 Manual de usuario
Avenview
Avenview C-COMP-VGA Manual de usuario
Avenview
Avenview C-COMPVGA-HDMI Manual de usuario
Avenview
Avenview C-HDMI-DVIA Manual de usuario
