Autodesk 551A1-05B111-1001 - Stitcher Unlimited 2009 Manual de usuario

Page | 1

Introduction _______________________________________________________________ 2

About Autodesk®Stitcher™ Unlimited 2009_________________________________________ 2

Goal of this tutorial ___________________________________________________________ 2

1. Loading Images _________________________________________________________ 3

The Autodesk Stitcher Unlimited 2009 interface ____________________________________ 3

Loading your shots ____________________________________________________________ 4

2. Stitching _______________________________________________________________ 6

Auto-Stitching________________________________________________________________ 6

Manual-Stitching _____________________________________________________________ 7

3. Alignment ____________________________________________________________ 12

4. Equalization ___________________________________________________________ 14

5. Render _______________________________________________________________ 15

Render area and rendering options______________________________________________ 15

Load a Spherical panorama and convert to QTVR® _________________________________ 20

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 2

Introduction

About Autodesk®Stitcher™ Unlimited 2009

Autodesk Stitcher Unlimited 2009 is the way to build high-quality panoramas for the Web, film, print,

and 3D.

With advanced features, Autodesk Stitcher Unlimited 2009 gives photographers and artists the

power to deliver the most impressive panoramas in the formats they need. Autodesk Stitcher creates

wide-angle, high-resolution 360° × 180° panoramic images in seconds from horizontally and vertically

overlapping photos. You can create new image sets from the panorama using a virtual camera with

zoom, pan, and roll motion. Results can be rendered as a cube, plane, cylinder, sphere projection,

and as a QuickTime®movie (Cylindrical QTVR and Cubic QTVR), and in VRML format for creating high-

impact Web pages, definition mattes, environment maps, and 3D models.

Goal of this tutorial

This 5-step tutorial will guide you through the creation of a full spherical panorama image in 360° and

a QTVR interactive file. This complete project will take you step by step through the main workflow

and features of Autodesk Stitcher Unlimited 2009.

This tutorial was prepared and illustrated using Autodesk Stitcher Unlimited 2009.

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 3

1. Loading Images

The Autodesk Stitcher Unlimited 2009 interface

Toolbar Stitching window Live Preview General Information

Thumbnail View Status Indicators

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 4

Loading your shots

The first step in the creation of a Stitcher project is to load the image files that you will use to

create the panorama.

To load the pictures:

1. Select File > Load Images from the main menu or click the Load Images icon in the toolbar.

The Load Images browser opens.

2. Select all the files you will use for your panorama.

3. Click Open.

When the images are loaded, Stitcher tries to read the EXIF data and proposes the

appropriate camera lens type. The following dialog lets you choose between keeping the

settings and adjusting them manually.

The current example use images with EXIF data so Stitcher correctly detects all the

parameters. Click Yes to keep the settings Stitcher has read.

NOTE If for any reason you need to change the parameters you can right-click anywhere

inside the Stitcher interface and open the Properties dialog.

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 5

Your images will be loaded into the Thumbnail View, as demonstrated in the screen shot

below.

Open the loaded.rzs file to see the image files already loaded for this project.

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 6

2. Stitching

Auto-Stitching

Autodesk Stitcher Unlimited 2009 has a fully automated stitching engine. Run the Stitch Shots

function by either:

•clicking the icon in the toolbar, or

•press ENTER (make sure no images are selected),or

•Stitch > Stitch Shots

The Stitching Window is a 3D environment in which you can navigate around using the navigation

controls (see “Navigating in Stitcher” in the Stitcher User Guide for more information on navigation).

NOTE The display can appears smoother in the Stitching window if your graphic card allows real time

linear blending; the GPU options can be set from the preferences. The icon is a status indicator to

specify that the GPU blending is activated.

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 7

Manual-Stitching

In this example almost all the pictures are automatically stitched, but one is missing. For situations

like this, you can use the Manual Stitch tool to complete the panorama.

To manually stitch the missing image, you need to find a stitched image which overlaps it. You will

use the overlapping features in the shots to match the images one to each other.

1. Select the unstitched image

2. Add to the selection by holding down the Shift key and clicking an already stitched image

which has features that overlap the unstitched image (in our example use the venitian08.jpg)

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 8

3. Do one of the following:

•Click Manual Stitch in the Toolbar, or

•Select Stitch > Manual Stitch, or

•Right-click and choose Manual Stitch from the contextual menu

When stitching images manually, you need to find at least two common points in both images.

The points should not be on the same line, but be distributed in the image for greater precision.

The manual stitch workflow is:

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 9

1. Click and place a marker on a particular detail in the first image

2. Click to add the same marker inside the second image, then repeat step 1 and 2 to create 3

points inside each image as shown in the screen shots.

Autodesk®Stitcher™ Unlimited 2009

Getting Started Tutorial

Page | 10

3. After you have placed the three matching points, click Stitch and your image will be

positioned correctly inside the panorama.

Otros manuales para 551A1-05B111-1001 - Stitcher Unlimited 2009

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de Autodesk

Autodesk

Autodesk 22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET... Instrucciones de instalación y mantenimiento

Autodesk

Autodesk LANDXPLORER SERVER Manual de usuario

Autodesk

Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Manual de usuario

Autodesk

Autodesk ROBOT STRUCTURAL ANALYSIS PROFESSIONAL 2010 Manual de usuario

Autodesk

Autodesk CAICE VISUAL SURVEY 10 - QUESTIONS AND... Manual de usuario

Autodesk

Autodesk AUTOCAD ELECTRICAL - Manual de usuario

Autodesk

Autodesk TOPOBASE 2011 - SYSTEM REQUIREMENTS Instrucciones de montaje

Autodesk

Autodesk NAVISWORKS Manual de usuario

Autodesk

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite... Manual de usuario

Autodesk

Autodesk 15606-011408-9330 - MAPGUIDE R6.3 SITE LIC-UPG... Manual de instrucciones

Autodesk

Autodesk 495B1-05A111-1301 - 3ds Max Design 2010 Manual de usuario

Autodesk

Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U... Instrucciones de operación

Autodesk

Autodesk AUTODESK MOTIONBUILDER 2011 Manual de usuario

Autodesk

Autodesk CAICE VISUAL ROADS 10 Manual de usuario

Autodesk

Autodesk INVENTOR 2010 - Manual de usuario

Autodesk

Autodesk 15606-011408-9330 - MAPGUIDE R6.3 SITE LIC-UPG... Manual de usuario

Autodesk

Autodesk LIGHTSCAPE Manual de usuario

Autodesk

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 Manual de usuario

Autodesk

Autodesk AUTODESK ROBOT STRUCTURAL ANALYSIS PROFESSIONAL 2011 - SYSTEM... Manual de usuario

Autodesk

Autodesk AUTOCAD MAP 3D Manual de usuario

Autodesk

Autodesk 057A1-05A111-1001 - AutoCAD LT 2009 Manual de usuario

Autodesk

Autodesk AUTOCAD ARCHITECTURE Manual de usuario

Autodesk

Autodesk 057A1-05A111-10MD - AutoCAD LT 2009 Manual de usuario

Autodesk

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario