AT&T MS2025 Manual de usuario

Quick start guide

MS2025 4-line

Small Business Cordless Handset

+06 1((

%#0%'.

+06 1((

%#0%'.

Parts checklist

Your telephone package contains the following items. Save

your sales receipt and original packaging in the event warranty

service is necessary.

Cordless handset

MS2025

User's manual

MS2025

Quick start guide

Charger for cordless

handset with power

adapter installed

Battery for cordless

handset

Battery compartment

cover

+06 1((

%#0%'.

User’s manual

MS2025 4-line

Small Business Cordless Handset

+06 1((

%#0%'.

Quick start guide

MS2025 4-line

Small Business Cordless Handset

This quick start guide provides you with the basic installation

instructions only.

Please refer to the user’s manual provided in the product

package for complete installation and operation instructions, or

you can download the manual from

www.telephones.att.com/manuals.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

Your product may be shipped with a protective sticker covering

the handset display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or other

cordless telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors,

microwave ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing

machine or work bench.

•

You must install and

charge the handset

battery before using the

cordless handset.

See pages 5-7 for easy

instructions.

Installation

Charge light

On when the handset is charging in the charger.

Softkeys (2)

Press to select a menu item displayed above

the key.

LINE 1/LINE 2/LINE 3/LINE 4

Press to make a call on the desired line.

Press to answer a call.

INT

Press to make an intercom call when in idle.

REDIAL/PAUSE

Press to view the last 10 numbers dialed.

/SPEAKER

Press to turn on the handset speakerphone.

Press again to resume normal handset use.

•

+06 1((

%#0%'.

Quick reference guide

VOL/ DIR

Press to scroll up while in menus.

During a call, press to increase the

listening volume.

Press to show directory entries when the telephone

is not in use.

MENU/SELECT

Press to enter the menu.

While in a menu, press to select an item or save an

entry or setting.

OFF/CANCEL

While using menus, press to return to idle mode.

During a call, press to hang up.

VOL/ CID

Press to scroll down while in menus.

During a call, press to decrease the

listening volume.

Press to show the caller ID history when the

telephone is not in use.

MUTE/DELETE

During a call, press to mute the microphone.

While predialing, press to delete digits.

While reviewing the directory entry, press to delete

an individual entry.

While entering or editing a directory entry, press to

erase a digit or character.

•

+06 1((

%#0%'.

Quick reference guide

Main menu

Ringers

Phone Settings

Using menus

Press MENU/SELECT or MENU to

show the first menu item, Ringers.

Press or to scroll through

menu items.

Press MENU/SELECT or SELECT

to select or save changes to a

highlighted menu item.

Press OFF/CANCEL or BACK

to cancel an operation, exit the

menu display or return to the

idle screen.

•

Belt clip

+06 1((

%#0%'.

Phone

BACK SELECT

Ringers

Phone settings

Plug the power adapter into an

electrical outlet not controlled

by a wall switch.

Charger installation

Install the charger as shown below.

IMPORTANT INFORMATION

Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

The power adapter is intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into

a ceiling, under-the-table or cabinet outlet.

Install the battery as shown on the following page. Once you

have installed the battery, the screen indicates the battery

status (see the table below). If necessary, place the handset in

the charger to charge the battery. For best performance, keep

the handset in the charger when not in use. The battery is fully

charged after 11 hours of continuous charging. See the table

on the Technical specification page in the user’s manual for

battery operating times.

If the screen is blank, you need to charge the handset without

interruption for at least 30 minutes to give the handset enough

charge to use the telephone for a short time. When the battery

is low, the handset shows Low battery and a flashing .

Battery indicators Battery status Action

The screen is blank or

shows Place in charger

and flashes.

The battery has no or

very little charge. The

handset cannot be used.

Charge without

interruption (at least

30 minutes).

The screen shows

Low battery and

flashes.

Battery has enough

charge to be used for a

short time.

Charge without

interruption (at least

30 minutes).

The screen shows

EXT XX. (XX represents

the extension number of

its registered device).

Battery is charged. To keep the battery

charged, place the

handset in the charger

when not in use.

Battery installation and charging

Plug the battery connector securely into the socket inside the

handset battery compartment. Insert the supplied battery with

the label THIS SIDE UP facing up as indicated.

Align the cover flat against the battery compartment, then

slide it upwards until it clicks into place.

Charge the handset by placing it face forward in the charger.

The charge light is on when charging.

Install the battery as shown below.

+06 1((

%#0%'.

The charge light

IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery (model

BT164392). To order a replacement battery, visit our website at

www.telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

If you do not use the handset for a long time, disconnect and remove the

battery to prevent possible leakage.

•

1 2

You must register this MS2025 cordless handset with the

MS2085 console or MS2015 deskset before use. Each MS2085

or MS2015 supports only one cordless handset. When first

purchased, the handset shows Choose Handset in Registration

at base menu. And put handset on cradle to register.

If the handset does not have enough power to proceed with the

registration, you need to charge the new handset for at least five

minutes (see Battery installation and charging on pages 6-7).

Start registration when the handset screen shows Choose

Handset in Registration at base menu. And put handset on

cradle to register.

Adding and registering a handset

Otros manuales para MS2025

Tabla de contenidos

Otros manuales de Auricular de AT&T

Manuales populares de Auricular de otras marcas

Swissvoice

Swissvoice ePure HD Manual de usuario

Philips

Philips TD6736/BH051P Manual de usuario

ASCOM

ASCOM I62 - Manual de usuario

LG-Ericsson

LG-Ericsson LIP-9010 Manual de usuario

GE 1583 Manual de usuario

iiNet

iiNet Handset Manual de usuario

ASCOM

ASCOM 9p23 Manual de usuario

AirCell

AirCell ST 3100 Manual de usuario

Eaton

Eaton HHIR-LCD-PROG Instrucciones de montaje

Mitel

Mitel 112 Manual de usuario

SBC

SBC SBC-381H Manual de usuario

Mitel

Mitel 5602 Manual de usuario

ASCOM

ASCOM d81 Messenger Instrucciones de instalación

SpectraLink

SpectraLink 7522 Manual de usuario

Avaya

Avaya L100 Series Cómo utilizar

ooma

ooma HD2 Handset Manual de usuario

Yealink

Yealink IPW56 Manual de usuario

Sony

Sony SBH52 Manual de usuario