Asus WL-330GE_M Manual de usuario

Este manual sirve para los siguientes modelos

1

Otros manuales de Enrutador inalámbrico de Asus

Asus

Asus Lyra Trio MAP-AC1750 Manual de usuario

Asus

Asus RT-AX58U Manual de usuario

Asus

Asus RT-AC68U Manual del operador

Asus

Asus RT-N53 Manual de usuario

Asus

Asus WL-500GP_V2 Manual de usuario

Asus

Asus TUF-AX5400 Manual de usuario

Asus

Asus ROG Strix GS-AX5400 Manual de usuario

Asus

Asus WL-520G Manual de usuario

Asus

Asus RT-N56U Manual de usuario

Asus

Asus RT-N10 B1 (RT-N10+ B1) Manual de usuario

Asus

Asus 4G-AX56 Manual de usuario

Asus

Asus RT-N12E Manual de usuario

Asus

Asus RT-AX88U Manual de usuario

Asus

Asus RT-N65U Manual de usuario

Asus

Asus RT-AX53U Manual de usuario

Asus

Asus WL-AM604g Manual de usuario

Asus

Asus RT-N66U Dark Knight Manual de usuario

Asus

Asus RT-AC1200HP Manual de usuario

Asus

Asus RT-AX53U Manual de usuario

Asus

Asus RT-AC66U Manual de usuario

Asus

Asus RT-N13U - Wireless Router Manual de usuario

Asus

Asus RT-G32 - Wireless Router Manual de usuario

Asus

Asus RT-AX55 Manual de usuario

Asus

Asus RT-AC88U Manual de instrucciones

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario

Draytek

Draytek Vigor2120 Series Manual de usuario

Sitecom

Sitecom WLR-4000 Manual de usuario

ASUS WL-330gE Setup

Jason at NSS reserved MAC Addresses for Robots and ASUS Bridges:

1463EB1

oASUS Bridge

MAC: E0-CB-4E-5D-E6-EA

IP: 172.18.63.1

oRobot:

MAC:00-80-2f-11-e0-29

IP: 172.18.63.22

Name: ese-robot-1463eb1.wufi.wustl.edu

1587CFD (14BCCCF/ MAC: 00:80:2f:11:f6:c4 sent in for repairs and was

replaced with this one)

oASUS Bridge

MAC: E0-CB-4E-1B-95-1A

IP: 172.18.63.3

oRobot

MAC: 00:80:2F:12:AE:70

IP: 172.18.63.2

Name: ese-robot-14BCCCF.wufi.wustl.edu

148CCC1

oASUS Bridge

MAC: E0-CB-4E-5D-E2-50

IP: 172.18.63.5

oRobot

MAC: 00:80:2f:11:f6:b6

IP: 172.18.63.4

Name: ese-robot-.wufi.wustl.edu

15BEF64 (1463EAB/ MAC: 00:80:2f:11:e0:21 sent in for repairs and was

replaced with this one)

oASUS Bridge

MAC: E0-CB-4E-5D-E2-EB

IP: 172.18.63.7

oRobot

MAC: 00:80:2f:12:d4:03

IP: 172.18.63.6

Name: ese-robot-15BEF64.wufi.wustl.edu

14BCCC5

oASUS Bridge

MAC: E0-CB-4E-5D-E2-10

IP: 172.18.63.9

oRobot

MAC: 00:80:2f:11:f6:ba

IP: 172.18.63.8

Name: ese-robot-14BCCC5.wufi.wustl.edu

159F58E (15EA4A2 sent for repairs. When the shipped it back it had the same

sbRIO but new serial number.)

oASUS Bridge

MAC: F4-6D-04-94-EB-22

IP: 172.18.63.11

SN: 4739

oRobot

MAC: 00:80:2f:12:B8:67

IP: 172.18.63.12

Name: ese-robot-15EA4A2.wufi.wustl.edu

Configuration Instructions for WUFI

1. Reset device by holding the reset button for 10 seconds. Then turn off for 10

seconds and plug Ethernet cable into PC and turn on.

2. Browse to 192.168.1.220

a. Username: admin

b. Password: admin

3. Select wunoreg and click on Connect. You will lose the connection to the ASUS

at this point. The MAC addresses are in the QIP tables, so the IP will be

automatically assigned according to the table above.

4. To test, change the network settings –Use the IP of the robot you are going to

connect the bridge to. Make sure it is off the network.

5. Now configure the robot to use the IP from the table above. If you do not know

the IP of the robot, then you need to reset the IP. Do this by by turning ON

(Down) DipSwitch -3 and pressing the Reset switch. Then hit refresh in MAX.

Configuration Instructions for WEP Wireless Network

1. Click on the Adapter tab, select the SSID and Click Connect. Enter the WEP

password if prompted. However, this doesn’t seem to work so you have to add it

again on the Advanced Settings page.

2. Click on Advanced -> Wireless -> Interface. Click on AP Scan

3. Click Select for the correct SSID.

4. Enter either passphrase or WEP key directly and click Save to List and Apply.